OEHLBACH POWERSOCKET 907 MKII HiFi Power Strip User Manual

: June 13, 2024
: OEHLBACH

Table of Contents

OEHLBACH POWERSOCKET 907 MKII HiFi Power Strip
Product Information
Specifications
Product Usage Instructions
COMPLIANCE WITH EU DIRECTIVES
PACKAGE CONTENTS
FEATURE
SPECIFICATION
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OEHLBACH POWERSOCKET 907 MKII HiFi Power Strip

OEHLBACH-POWERSOCKET-907-MKII-HiFi-Power-Strip-product

Product Information

The Powersocket 907 is a high-quality power socket strip designed for safe and convenient use. It features multiple power outlets and USB ports for charging various devices simultaneously. The product is compliant with EU directives and carries the CE mark, ensuring its adherence to safety standards.

Specifications

Input Voltage: 230 V / 50 Hz
Rated Current: 10 A
Voltage Limitation: < 0.77 kV
USB Output Voltage (Single Use):
- Type C: PD 65 W max., 5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 3.25 A
- Type A: 5 V / 2.4 A, 12 W max.
USB Output Voltage (Simultaneous Use):
- Type C: PD 45 W max., 5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 2.25 A
- Type A: 5 V / 2.4 A, 12 W max.
EMI/RFI Filter: Yes

Product Usage Instructions

The Powersocket should only be used with mains sockets that have the required connection values.
Avoid using the Powersocket if any liquid has been spilled on or into the device.
Avoid using the Powersocket in rooms with very high humidity.
Do not touch or connect the power cord with wet hands.
Keep the Powersocket and the power cord away from heaters.
If there is visible damage to the Powersocket or the power cable, discontinue use and replace the device.
Do not attempt to repair a damaged Powersocket; it should be replaced.
Avoid placing heavy objects on the Powersocket or the power cord.
Ensure that the power plug is always easily accessible.
If the devices connected to the Powersocket will not be used for an extended period, disconnect the Powersocket from the mains by pulling out the mains plug.
Avoid using cleaning agents or chemical solvents, as they may damage the surface of the Powersocket.
During thunderstorms, it is recommended to unplug the Powersocket from the mains.

Compliance with EU Directives
The Powersocket 907 complies with various EU directives, including the Low Voltage Directive, EMC Directive, RoHS Directive, and Waste Electrical and Electronic Equipment (WEEE) Directive. For a copy of the Declaration of Conformity, please contact your distributor or Oehlbach Kabel GmbH headquarters.

Disposal Instructions: In accordance with European Directive 2013/56/EU, electrical and electronic equipment should be disposed of separately through local collection points. Please follow local regulations and refrain from disposing of old devices with regular household waste.

Thank you, for choosing an Oehlbach® quality product. Ple-ase read these operating instructions in detail to ensure unre-stricted and error-free operation of the device.

IMPORTANT SAFETY INSTRUCTIONS
The operating instructions contain important information on operation and safety. Be sure to follow all instructions. Keep the operating instructions in a safe place.

According to DIN VDE 0620, portable socket strips must

not be plugged in one after the other,
not be operated covered,
not be used as a substitute for fixed installations.

The Powersocket may only be operated on mains sockets with the required connection values.
The Powersocket must not be used if any liquid has been spilled on or into the device.
The Powersocket must not be used in rooms with very high humidity.
Do not touch or connect the power cord with wet hands.
Keep the Powersocket and the power cord away from heaters.
If there is visible damage to the powersocket or the power cable, the device must no longer be operated.
A damaged Powersocket must not be repaired but replaced.
No heavy objects may be placed on the powersocket or the power cord.
The power plug should always be freely accessible.
If the devices connected to the Powersocket are not used for a longer period of time (e.g. on vacation), the Powersocket should be disconnected from the mains by pulling out the mains plug.
Do not use any cleaning agents or chemical solvents, as this could damage the surface.
In case of a thunderstorm, it is always recommended to unplug the Powersocket from the mains.

COMPLIANCE WITH EU DIRECTIVES

This product is allowed to carry the CE mark. It com-plies with EU Low Voltage Directive 2014/35/EU; EU Directive 2014/30/EC; EU RoHS Directive 2011/65/EU; EU Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU. You can obtain a free copy of the Declaration of Con-formity by contacting your distributor, sales or Oehl-bach Kabel GmbH headquarters. Contact informa-tion can be found at: http://www.oehlbach.com.

DISPOSAL INSTRUCTIONS
According to the European Directive 2013/56/EU, all electrical and electronic equipment must be disposed of separately via local collection points. Please observe the local regulations and do not dispose of your old devices with the normal household waste.

WEEE RETURN OPTION
Separate collection of old equipment: electrical and electronic equipment that has become waste is referred to as old equip-ment. Owners of old appliances must dispose of them separately from unsorted municipal waste. Old appliances do not belong in household waste, but in special collection and return systems.

Batteries and accumulators as well as lamps: Owners of old ap-pliances must separate old batteries and accumulators that are not enclosed by the old appliance from the old appliance before handing them in at a collection point. This also applies to lamps that can be removed from the waste equipment without being destroyed. If the waste equipment is to be prepared for reuse with the participation of a public waste management authority, batteries and accumulators as well as lamps do not have to be removed.

Options for returning old appliances: Owners of waste equipment from private households can return it free of charge to the collec-tion points of the public waste management authorities or to the take-back points set up by manufacturers or distributors. Stores with a sales area of at least 400 m² for electrical and electronic equipment and those grocery stores with a total sales area of at least 800 m² that offer electrical and electronic equipment several times a year or on a permanent basis and make it availa-ble on the market are obliged to take it back.

This also applies to online or catalog sales if the storage and shipping areas for electrical and electronic equipment are at least 400 m² or the total storage and shipping areas are at least 800 m². Distributors must generally ensure take-back by providing suitable return fa-cilities at a reasonable distance from the respective end user. The possibility of returning an old appliance free of charge exists for distributors who are obliged to take it back, among other things, if a new appliance of the same type, which essentially fulfills the same functions, is supplied to an end user. If a new device is delivered to a private household, the similar old device can also be handed over there for collection free of charge.

In the case of online or catalog sales, this applies to equipment in categories 1, 2 or 4 as defined in Section 2 (1) of the Electrical and Electronic Equipment Act, namely „heat transmitters“, „visual display units“ or „large appliances“ (the latter with at least one external dimen-sion exceeding 50 centimeters). End users are asked about their intention to return the equipment when they conclude a purchase contract. In addition, small appliances that do not exceed 25 cen-timeters in any external dimension can be returned free of charge to the distributors‘ collection points, irrespective of the purchase of a new appliance, and this is limited to three old appliances per type of appliance.

Data protection notice: Old devices often contain sensitive personal data. This applies in particular to information and te-lecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of. Meaning of the „crossed-out dustbin“ symbol: The symbol of a crossed-out dustbin regularly displayed on electrical and elec-tronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

PACKAGE CONTENTS

Oehlbach Powersocket 907
high quality power cable
Operating instructions

COMMISSIONING
Connect the supplied power cable to the Oehlbach Powersocket 907 and insert the power plug into a wall socket. Then the bar can be activated with the POWER switch. The Oehlbach Powersocket 907 offers 8 sockets, of which 4 can be switched on separately with the GROUP-2 switch. The 4 sockets of the GROUP-2 are only supplied with power when the POWER switch is also switched on. Each group consists of four sockets, with two unfiltered „analog“ sockets and two filtered „digital“ sockets per group.

CONNECTING DIGITAL DEVICES
Digital terminal devices can be extremely sensitive to interfe-rence pulses and can generate high-frequency interference sig-nals themselves. Therefore, connect all digital devices (e.g. DVD/BluRay player, hard disk recorder, PC, …) to the digital sockets of the power strip. These sockets are black. Devices connected to these sockets are protected by an efficient filter from all in- terference pulses scattering through the mains. This circuit also eliminates interference caused by the connected devices them-selves in the power strip.

CONNECTING ANALOG DEVICES
Connect all analog devices such as tuners, turntables, tape decks, or power amplifiers to the grey „analog“ outlets. Via these sockets, the Powersocket 907 provides unfiltered power for all analog devices, thus reliably maintaining enough reserves for a permanently stable power supply at all times, even when large amounts of power are required.

POLARITY CONTROL
An in-phase connection of all devices guarantees the best possible and undistorted sound. This is the only way to ef-fectively avoid potential equalization currents, which have a negative influence on the sound. The POLARITY light si-gnals that the sockets of the power outlet marked in red are connected to phase (L). If the polarity light does not illu-minate, switch off the power outlet, disconnect the mains unplug the power plug from the wall socket and plug it back in again, turning it 180°. The polarity LED will now light up and the phase marking on the individual sockets of the strip will correctly indicate the phase. To check the phase correct connection of your HIFI equipment, you should use the Oehlbach Phaser (art.no. 17017). All end devices can now be connected connected in phase.

USB SOCKETS
The Powersocket 907 offers two different USB sockets, one USB-C and one USB-A socket, where multimedia devices (e.g. MP3 players, smartphones, lap tops …) can be charged. The USB sockets only become active when the power strip is switched on with the POWER switch.
Note: For optimal use of the USB sockets, we recommend a USB-PD cable (Power Delivery).

OVERLOAD PROTECTION
If the current consumption of the devices is higher than the maxi-mum load of the Powersocket or there is a defect in a connected device. The RESET switch is triggered automatically and switches the complete Powersocket 907 off. This is indicated by the PRO-TECTED lamp going out.

FEATURE

8 individual sockets
4 digital (filtered) outlets / 4 analog (unfiltered) Sockets
The two groups of sockets consist of 2 filtered and 2 unfiltered sockets and can be switched separately via
the POWER switch and the group 2 switch. Group 2 is only supplied with power when the POWER switch is also switched on.
Solid housing made of brushed aluminum in anthracite color
with stable plastic side caps
Phase correct connection by control lamp and
phase marking on the single socket
Integrated sheath current filter against hum loops and
high-frequency interference pulses
2 different USB sockets for charging/operating devices (see specification for technical data)
Overload protection with LED indicator light
24 carat gold-plated plug contacts
Very high quality internal cabling:
Inner conductor made of high-purity and oxygen-free copper
2.1 mm² inner conductor cross-section
Gold-plated brass rails for internal power distribution
External power cable with IEC connector: Inner conductor made of oxygen-free copper 1.5 mm² inner conductor cross-section 1.5 m cable length

SPECIFICATION

Ambient temperature: -5°C to +35°C
Mains voltage: 230 V / 50 Hz
Rated current: 10 A
Limiting voltage: < 0.77 kV
USB output voltage: When used alone:
Type C: PD 65 W max. 5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 3.25 A
TYPE A: 5 V / 2.4 A, 12 W max.
When used simultaneously can:
Type A: 5 V / 2.4 A, 12 W max.
Type C: PD 45 W max. 5 V / 3 A, 9
V /3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 2.25 A
EMI/RFI Filter: Bandwidth: 100 kHz to 50 MHz
Attenuation: 50 dB Max

WARRANTY

Congratulations! Thanks to your intelligent choice you are now the proud owner of an OEHLBACH® product. OEHLBACH® products enjoy an excellent reputation around the world due to their high quality. This high quality standard allows us to provide a 2 year warranty for this OEHLBACH® product. OEHLBACH® products are continuously inspected and checked throughout the entire manufacturing process. If service is necessary, however, please observe the following:

The warranty period starts with the purchase of the product and only applies to the original owner.
During the warranty period we will rectify any defects that are due to faulty material or workmanship by replacing or repairing the defective part at our discretion. Further claims, and in particular those for price reduction, cancellation of sale, compensation for damage or subsequent damage, are excluded. The warranty period is not affected by any work we provide under the warranty.
The product should not be tampered with.
In the event of a warranty claim please contact your autho rised dealer first. Should it prove necessary to return the product to us, please ensure that · the product is sent in its original factory packaging in good condition,
your proof of purchase is enclosed.
5. The following are excluded from the warranty:
- Illuminants
- Wear parts
- Shipping damages, either readily apparent or concealed (claims for such damages must be lodged immediately with the shipping agent, the railway express office or the post office).
- Scratches in metal components, front panels, etc. (You must notify your authorised dealer directly of such defects within 5 days of purchase).
- Defects caused as a result of incorrect installation, faulty connection, improper operation (see user manual), over- loading or external force.
- Improperly repaired or modified devices that have been opened by a party other than us.
- Subsequent damage to other devices
- Reimbursement of costs for repairing damage that has been caused by a third party without our prior conse