OEHLBACH POWERSOCKET 907 Barrette Secteur User Manual

OEHLBACH POWERSOCKET 907 Barrette Secteur

Thank you for choosing an Oehlbach® quality product. Please read these instructions carefully; this will ensure the full and error-free functioning of the product.

REMARKS
Please observe the following instructions in order to prevent any risk of fire, short-circuits or damage to the product:

1. Do not expose the product to rain or moisture. Do not place any containers filled with water on the product.
2. Do not install the product in a bookcase, fitted cupboard or similarly enclosed spaces. Please ensure that there is sufficient ventilation for the product.
3. You should not cover the product or place items on the product in order to prevent short-circuits or fire due to over-heating.
4. Do not place the product in proximity to sources of heat, e.g. heaters, stoves, etc.
5. Do not use the product in proximity to naked flames or candles.
6. Only use a dry cloth to clean the product.
7.  Functionality may be restricted depending on the configuration of the device.
8.  Please only use qualified service personnel to carry out repairs or servicing work.

IMPORTANT SAFETY INSTRUCTIONS:

This manual contains important information concerning operation and safety. It is imperative you observe all of the in-formation. Keep the manual in a safe place for future reference. According to DIN VDE 0620 portable multiple socket outlets should not be

•  connected in a row,
• operated under a cover,
• used as a substitute for fixed installations

The Power socket should only be connected to a mains socket which has the required connection values. The Power socket should not be used if there is any liquid in or on the device. The Power socket should not be used in areas where there is a very high degree of humidity. Do not touch or connect the mains cable with damp hands. Keep the Power socket and mains cable away from heating appliances. The device should no longer be operated if there is visible damage to the Power socket or mains cable. A damaged Power socket should not be repaired, but replaced. No heavy objects should be placed on the Power socket or the mains cable. The mains plug should be easily accessible at all times. If the devices that are connected to the Power socket are not going to be used for a pronged period (e.g. while on holiday), the Power socket should be disconnected from the mains by removing the plug. Do not use any cleaning agents or chemical solvents when cleaning, as these could damage the surface. Repairs should always be conducted by qualified specialists, as you could be exposed to dangerous high voltage levels or other hazards. During a thunderstorm we always recommend disconnecting the Power socket from the mains.

COMPLIANCE WITH EU DIRECTIVES
This product is eligible to bear the CE mark. It complies with the EU Low Voltage Directive 2014/35/EC; EU Directive 2014/30/EC; EU RoHS Directive 2011/65/EC; EU Directive on Waste Electrical and Electronic Equipment (WEEE) 2012/19/EC. You can obtain a free copy of the Declaration of Conformity by contacting your retailer, distributor or the headquarters of Oehlbach Kabel GmbH. Contact information can be found at: http://www.oehlbach.com.

DISPOSAL ADVICE
In accordance with the European Guideline 2013/56/EC all electrical and electronic equipment must be disposed of separately at local collection points. Please observe local rules and do not dispose of your old equipment in the normal household waste!

PACKAGING CONTENTS

• Oehlbach Power socket 907
•  User guide

CLEANING

Before cleaning the Power socket disconnect the mains plug. The Power socket should only be dusted. Do not use any liquid cleaners or sprays.

INITIAL OPERATION

Connect the supplied power cord to the Oehlbach Power socket 907 and insert the mains plug into a wall outlet. The multi-socket outlet can now be activated via the POWER switch. The Oehlbach Power socket 907 is equipped with 4 sockets that can be switched separately with the GROUP-2 switch. Each group consists of four sockets, whereby each group is provided with two unfiltered „analogue“ sockets and two filtered „digital“ sockets.

CONNECTING DIGITAL DEVICES
Digital devices can react extremely sensitively to disturbing pulses and sometimes even produce high-frequency interfering signals. Therefore, make sure you connect all digital devices (e.g. DVD/BluRay player, HDD recorder, PC, etc.) to the digital sockets on the power strip. These sockets are grey. Devices connected to these sockets are protected by an efficient filter against all disturbing pulses that arrive via the mains supply. This switching circuit also eliminates interference caused by the connected devices themselves.

CONNECTING ANALOGUE DEVICES
Connect all analogue devices such as a tuner, record player, tape deck or amplifier to the black „analogue“ sockets. The Power-socket 907 uses these sockets to provide unfiltered current for all analogue devices and sufficient reserves for a permanent, stable power supply at all times, even in the event of high power requirements.

POLARITY CONTROL
An in-phase connection of all devices will guarantee the best possible, unadulterated sound. This is the only way to ensure that potential equalisation currents, which have a negative impact on the sound, are effectively avoided. The POLARITY light indicates that the red sockets are connected in-phase (L). If the polarity light does not illuminate, switch off the power supply, remove the mains plug from the wall socket, turn it around around 180° and plug it in again. The polarity LED now illuminates and the phase designation on the individual sockets correctly designates the phase. To proof the correct in-phase connection of your HIFI-device, you should use the Oehlbach Phaser (Art.No. 17017). All end devices can now be connected in-phase accordingly.

USB PORTS
The Power socket 907 is equipped with two USB ports, which can be used to charge multimedia devices (MP3 players, smart- phones, etc.). The USB ports are only active when the Power socket is switched on via the power switch.

SURGE PROTECTION
If the surge protection function of the Power socket 907 is triggered as a result of extreme voltage peaks, the eight sockets (and all of the connected devices) are disconnected from the mains. The Power socket can be used again by pressing the RESET button. Correct operation of the active surge protection function is indicated by the PROTECTED light.

FEATURES

•  8 individual sockets

•  4 digital (filtered) sockets / 4 analogue (unfiltered) sockets

• The two socket groups (filtered and unfiltered) can be switched individually via two separate power switches

•  Solid brushed aluminium housing in an anthracite finish with sturdy plastic side caps

• Correct phase connection ensured by an indicator light and phase marking on the individual socket

•  Integrated sheath current filter protects against ground loops and high-frequency transients

•  2 USB ports for charging devices (5 V, 2100 mA)

•  Surge protection with LED indicator light

•  24 carat gold-plated plug contacts

•  Extremely high-quality internal wiring:
  High-purity and oxygen-free copper inner conductor 2,1 mm² inner conductor cross-section
  Gold-plated brass rails for internal power distribution

• External power cable with IEC connector:

Oxygen-free copper inner conductor
1.5 mm² inner conductor cross-section
1.5 m cable length

SPECIFICATION

• Ambient temperature: -5°C to +35°C
• Mains voltage:  230 V / 50 Hz
• Rated current: 10 A
• Clamping voltage:  < 0,77 kV
• USB voltage: 5 V / 2.1 A
• EMI/RFI filter: Bandwidth: 100 kHz to 50 MHz
  Attenuation: 50 dB max.

WARRANTY

Congratulations! Thanks to your intelligent choice you are now the proud owner of an OEHLBACH® product. OEHLBACH® products enjoy an excellent reputation around the world due to their high quality. This high quality standard allows us to provide a 2 year warranty for this OEHLBACH® product. OEHLBACH® products are continuously inspected and checked throughout the entire manufacturing process. If service is necessary, however, please observe the following:

1. The warranty period starts with the purchase of the product and only applies to the original owner.
2.  During the warranty period we will rectify any defects that are due to faulty material or workmanship by replacing or repairing the defective part at our discretion. Further claims, and in particular those for price reduction, cancellation of sale, compensation for damage or subsequent damage, are excluded. The warranty period is not affected by any work we provide under the warranty.
3. The product should not be tampered with.
4. In the event of a warranty claim please contact your autho rised dealer first. Should it prove necessary to return the product to us, please ensure that
   •  the product is sent in its original factory packaging in good condition,
   • your proof of purchase is enclosed.
5. The following are excluded from the warranty:

•  Illuminants
•  Wear parts
• Shipping damages, either readily apparent or concealed (claims for such damages must be lodged immediately with the shipping agent, the railway express office or the post office).
• Scratches in metal components, front panels, etc. (You must notify your authorised dealer directly of such defects within 5 days of purchase).
•  Defects caused as a result of incorrect installation, faulty connection, improper operation (see user manual), over- loading or external force.
•  Improperly repaired or modified devices that have been opened by a party other than us.
•  Subsequent damage to other devices
• Reimbursement of costs for repairing damage that has been caused by a third party without our prior conse

Oehlbach Kabel GmbH
Lise-Meitner-Str. 9 I 50259 Pulheim · Germany
Tel. +49 2234 807220
www.oehlbach.com I info@oehlbach.com

References

• art.no
• OEHLBACH® - Hochwertige Audiokabel, Stromversorgungs- und AV-Zubehörprodukte für Heimkino und professionelle Installationen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>