Subsonic SA5633 Wireless Led Controller Instruction Manual
- May 15, 2024
- SUBSONIC
Table of Contents
- SA5633 Wireless Led Controller
- Before the first use
- Features
- Charging
- Connecting the controller to Switch
- Economy mode
- Programming the RGB LEDs
- Adjusting the vibration effect
- Turbo function
- eSport M1 & M2 buttons
- Troubleshooting
- Precautions for use
- Contact and support
- Respect for the environment
- WIRELESS LED CONTROLLER
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WIRELESS LED
CONTROLLER
SA5633 Wireless Led Controller
Before the first use
Thank you for purchasing the WIRELESS LED CONTROLLER, Before using t, please read this manual carefully. Please keep it for future reference.
Features
- The WIRELESS LED CONTROLLER s compatible with Switch
- Programmable RGB LED
- Motion sensors (accelerometer, gyroscope), vibration
- Additional programmable eSport M1 and M2 buttons on the back of the controller,turbo function
- Built-in rechargeable battery (charging cable included)
- Can be used with 100% of games compatible with the Switch Pro controller
Working voltage: DC 3.7V
Working current: 25mA-150mA
Builtin lthium battery: 600mAh
Input charging voltage: Type-C input 5V
Bluetooth version: 2.1+EDR
Transmission distance: 10 M
Battery lfe: approx 10 hours
Charging
Before connecting for the firs time, fully charge the controller’s battery.
To charge the battery, connect the controller to.a USB port using the supplied
USB cable. The LEDs will flash slowly while charging and turn off when the
charge is complete.
Do not charge your controller for more than 4 hous.
When the battery level is slow, the LED indicator wil flash quickly.
Connecting the controller to Switch
- Switch on your console:
- Gothe*Controllers menu.
- Then go to*Change Grip/Order”
- Long press the Home button of the controller for 5 seconds to turn it on. The LEDs will run and flash quickly, the controllerisn the pairing mode.
- When the controller appears on screen, the pairing is complete. On the controller, the LEDS will top flashing and only the LED indicating the player will remain lit.
For further information regarding the use of the controller, please refer to
the instruction manual of your Nintendo SWITCH.
NOTE: Once the controller has been nstalled, the wireless controller i
identified by the console. Just press the Home button to reconnect to the
console.
You can also use the controllerin wired mode by connecting it to the console
using the USB cable provided.
Economy mode
In order to preserve the battery e, the controller automatically shuts off after 5 minutes of inactivity. ress the Home button to reactivate.
Programming the RGB LEDs
When the controller is on, the defaul ight mode is ainbow. You can change the light mode:
- Fixed colours: press Turbo & D-Pad left — to change to fixed colours mode. Press Turbo & D-Pad right — to switch colour.
- Breathing fixed colours: press Turbo & D-Pad left — to change to breathing fixed colours mode
- You can also change RGB LEDs brightness by pressing Turbo during 2 seconds. The cycle will do 0%, 25%, 50%, 75%, 100% (defaultis 75%).
Adjusting the vibration effect
When the controller is on, press simultaneously and hold L & 7L &R & ZR to adjust the vibration level from Medium to Strong to Weak (defaultis Medium).
Turbo function
IMPORTANT: the turbo function is not available in all games, only some can support It You can affect a turbo or auto function to the keys: A/B/X/Y/LIZURIZR.
- Turbos for the first time, press one of the keys listed above & Turbo simultaneously.
- The key has now the turbo function, so everytime you press it it will repeat quickly.
- Automatic:for the second time, press one of the keys lsted above & Turbo simultaneously. The key has now the auto function, press t once and the action willrepeat endiessly.
- Clear the turbo functions or the third time, press one of the keys lsted above & Turbo simultaneously.
The key s now reset o original
eSport M1 & M2 buttons
You can affect to the keys 1/L/—/—/A/B/X/Y/L/R/ZL/ZRL3/R3 to M1 or M2 buttons.
By default, M1 is mapped to
ZLand M2is mapped to ZR.
- Press and hold the M key,the press the + key. The light indicator flashes.
- Then press the key that you would like to affect and press again M to save the setting.
Example: to map A on M1, press and hold M1, then press + The light indicator flashes. The press A, then M1 again and M1 is now mapped to A
To clear the mapping and come back to default, press and hold M1 & M2 &- simultaneously.
Troubleshooting
Ifyou are unable to connect the controller to the console, press the RESET
button located in a small hole on the back of the controller with a paper cip.
This will reset the controller.
If the controller does not work properly, go to wwwsubsonic.com to pdate the
controller drver.
Precautions for use
- Donot use the controller for any purpose other than those described in this document.
- To avoid electrical shock,store and use the controllerin a dry place, away from moisture and direct sunlight.
- Exposure to high temperatures may damage the body or internal electronics of the unit
- Do ot disassemble.
- Stop using the controller immediately if you experience fatigue, discomfort or pain. If hese effects persist, consult your doctor.
- Take regular breaks during play.
- Do ot allow small chidren to play with the controller. This product s not intended for children under the age of 3.
Contact and support
The Subsonic team is at your disposal for any further information concerning the WIRELESS LED CONTROLLER or other products in our range of peripherals. contact@subsonic.com
Respect for the environment
To protect the environment, electrical and electronic equipment must not be
disposed of with household waste.
Please return them to a collection point for recycling.
UE Declaration of conformity to the Radio Equipment Directive
Hereby, SUBSONIC S.A.S. declares that the product WIRELESS LED CONTROLLER
– Brand: Subsonic
– Model: SAS633, SAS633-1, SAS633-2, 5A5633-3
– EAN codes: 3701221702502, 3701221702519, 3701221702526 is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/UE. For details, please contact SUBSONIC, 314 allée des noisetiers,
69760 LIMONEST, France.
In case of malfunction, visit www.subsonic.com.
WIRELESS LED CONTROLLER
CONTACT & SUPPORT
contact@subsonic.com
www.subsonic.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>