SNS 12-01 Mounted Wall Table Instruction Manual

SNS 12-01 Mounted Wall Table

Product Specifications

• Product Name: SNS Wall Table
• Product Code: 12-01
• Recommended Installation Tool: Drill
• Materials Included:
• 6 x 4 x 18 mm Chipboard Screws
• 4 x 8 mm Rocket Dowels
• 4 x 5 x 60 mm Wall Screws

Product Usage Instructions:

1. Attach the L-shaped bracket to the chipboard using the 4 x 18 mm chipboard screws.
2. Mark the drilling points on the wall using a pencil.
3. Drill the wall with a 7 mm drill bit and insert the dowels.
4. Align the holes in the L-bracket with the dowels and secure the table to the wall using the 5 x 60 mm screws.

Your table is now ready for use. Enjoy using it on bright days!

Frequently Asked Questions:

1. Q: Can I install the SNS Wall Table without a drill?
   A: It is recommended to use a drill for installation to ensure proper stability and support.

2. Q: How much weight can the SNS Wall Table hold?
   A: The table is designed to hold up to X pounds of weight when properly installed according to the instructions.

3. Q: Can I paint or customize the SNS Wall Table?

4. A: It is not recommended to paint or modify the table as it may affect its structural integrity.

WALL TABLE

Note: It is recommended to do the installation with the help of a drill.

1. Fix the L break arm apparatus to the chipboard through the specified holes with the help of 4 x 18 mm chipboard screws. (The 30 cm part will come to the chipboard.)

2. Determine the parts you will drill on the wall by marking them with a pencil.

3. Drill the wall using the hilti with the 7 mm wall drill bit.
   Drive the dowels into the holes.
   

4. Fix the table to the wall with 5 x 60 mm screws by aligning the holes in the L apparatus with the dowels.
   

MUUR TAFEL

Opmerking : Het wordt aanbevolen om de installatie uit te voeren met behulp van een boormachine.

1. Bevestig het L-breekarmapparaat aan de spaanplaat via de aangegeven gaten met behulp van spaanplaatschroeven 4 x 18 mm.(Het stuk van 30 cm komt op de spaanplaat.)

2. Bepaal de onderdelen die u op de muur gaat boren door ze te markeren ze met een potlood.

3. Boor de muur met behulp van de hilti met de 7 mm muurboor.
   Drijf de deuvels in de gaten.

4. Bevestig de tafel aan de muur met schroeven van 5 x 60 mm door de gaten in het L-apparaat uit te lijnen met de deuvels.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>