COSTWAY TY580401 Foosball Table Instruction Manual
- May 15, 2024
- COSTWAY
Table of Contents
TY580401 Foosball Table
Instruction Manual
Foosball Table
Table de Baby-Foot
TY580401
TY580401 Foosball Table
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start
Please read all instructions carefully and keep it for future reference.
Warning
Attention: Children should use this product under the parental
supervision.
Danger: Keep all small parts and packaging materials for this product
away from babies and children, otherwise they may pose a choking hazard.
WARNING: CHOKING HAZARD
-Small parts.
Not for children under 3 years.
General Warnings
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation
can lead to a danger.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Ensure a secure surface during installation, and place the product always on a
flat, steady and stable surface.
Insert the ball box into the card slot, align the
screw holes, and then fix it with screws. Fix the ball ring to the
corresponding position on the end panel.
Align the hole of the scorer to the end panel and then press the scorer fasteners to secure it in place.
First align one side plate with the holes on the two end panels, use screws to fix. Do not fully tighten until the last step is completed. Align the sports field board with the slot of the end panels on both sides until it snaps into the slots on the side board. Load buffers at both ends of the player-teams, then pass teams of the same uniform through the side plate holes at an interval as shown in the figure.
Pass the other side plate through the holes of the four teams, align the side plate screw holes with the holes on the end plates, and then lock the screws. Install the handles and safety end caps at both ends of the teams, as shown in the figure. After pressing in place, lock the handles with screws.
Place the four legs on the inner side of the side plates, align the screw
holes.and tighten the screws. After confirming that the installation is
correct, tighten all screws to ensure that they are stable and durable.
Return / Damage Claim Instructions
DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box.
Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a
part is needed for replacement. This helps our staff identify your product
number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your
replacement or refund processed quickly. Please make sure you have the box
even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>