COSTWAY MU70014DE 88 Key Electronic Keyboard Instructions
- May 15, 2024
- COSTWAY
Table of Contents
COSTWAY MU70014DE 88 Key Electronic Keyboard Instructions
Before You Start
Please read all instructions carefully and keep it for future reference
Warning
Attention: Children should use this product under the parental
supervision.
Danger: Keep all small parts and packaging materials for this product
away from babies and children, otherwise they may pose a choking hazard.
General Warnings
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation
can lead to a danger.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Ensure a secure surface during installation, and place the product always on a
flat, steady and stable surface.
The following interface function diagram:
Charging Indicator
-
The charging indicator is red. When the piano is plugged into USB for charging, the red light will turn on. When the battery is full, the green light turns on and the red light goes off.
When the power is high or full, it is normal for the charging indicator light to flash or go out after charging through USB. -
Battery: High-capacity lithium battery, the charging time is about 4h, please charge for more than 5h for the first use.
Charging adapter: 5V 2A
Protection Function
If the lithium battery voltage is too low (below 3. 5v), the product will automatically reset or can not started. The charging reminder is: While playing the piano or music, it is automatically stop playing and restore the initial setting state.
- L-OUT/R-OUT: 6.5mm professional equipment output interface, two independent L/R stereo output.
Connect active speaker or audio power amplifier and headphones, enjoy the
double channel surround sound output.
Support three line earphone and external speaker, not support four line with
microphone earphone. Suggest using 3.5V stereo headphone plug.
- MIC Function: Fixed reverb function is added to satisfy users’ desire of playing and singing at any time and anywhere.
- MP3 Interface: Connect to MP3 or other external audio sources, double channel surround sound effect.
- SUS: Sustain pedal, prolong the end time of the key sound.
- MICRO USB: Charging interface and MIDI connection function.
- MIDI Function:
-
Connect the computer with MICRO USB data cable, and open the corresponding software to use the MIDI function.
You can install software with MIDI transmission protocol (such as: Everyone Piano) to use with your computer.
Controlling external devices via piano
Play the keyboard, the piano will send the MIDI data to the external device through the USB interface, then you will hear the sound from the BXII and the external device. Controlling piano through external devices
Use USB cable to connect external equipment, select the piano as the external device’s MIDI output method. The piano can be used as an external sound source. -
Bluetooth APP connection (Refer to the following section of Bluetooth APP functions).
- Two built-in quality external speakers: The sound field effect of speakers can make the user intoxicated in the wonderful music.
- Sound effects: Two types of sound are built-in: Sustain/Vibrato.
- Digital tube: Display the currently used function.
- Demo: 20 Demo songs, press demo button to choose.
Number| Demo songs| Number| Demo songs
---|---|---|---
01| Ode to Joy| 11| Milk Song
02| Little Star| 12| A come Amour
03| For Alice| 13| Les premiers slurries de Vanessa
04| Dancing Girl| 14| Snow dreams
05| My Old Classmate| 15| Clean Sky
06| A Decade| 16| Edelweiss
07| Clouds Chasing the Moon| 17| Dance of Fireflies
08| Come into My Dream| 18| My Soul
09| Bandari. Crystal. Lake| 19| Ballade Pour Adeline
10| Green Sleeves| 00| Laputan Castle in the Sky - Chord:
When playing rhythm, press the chord function and then to press the multi- fingering method within the range of keys A1-F4 #, the corresponding chord accompanying sound can be heard. Press the single finger chord fingering, the chord of single-finger will be played.
Table of Single-finger chords (example)
-
Transpose+/-: The default is level 0, plus 6 levels, minus 6 levels.
Press the Transpose+ button to increase the knocking force of the keys; Press the Transpose- button to reduce the knocking force of the keys. -
Vol +/-: Starts at level 14, largest level is 17, minimum is 0.
-
Tempo+/-
The default speed is 120, the maximum can be adjusted to 300, the minimum can be reduced to 30. Different DEMO songs show different speeds. The actual speed shall prevail. -
Tone+/-
Press Tone+ or Tone- to select tone. 128 kinds of tone, please refer to the List Of Tones for details. -
Rhy+/-
Press Rhy+ or Rhy- to select rhythm. 128 kinds of rhythm, please refer to the List Of Rhythms for details. -
OKON:
Press the OKON button to enter the teaching mode automatically. Demo song accompaniment will play in a continuous loop and wait for the user to play. Touch any key to play the main theme of the demo song, press the OKON button again to select the loop. Press Start/Stop button to make the demo song accompaniment stop playing. -
Metronome:
Press the Metronome function to make a beat sound, and the metronome will play at the current speed. Press Start/Stop function to turn off the metronome. -
Recording Function:
Press this button to enter the recording mode and make the sound of the metronome. At this point, press any key to start recording. The maximum number of recordings is
-
When the recording is full, the metronome sound stops. You cannot continue to record any note. When you are recording, you can play it by pressing the “Play” button at any time.
-
Each time you press this button, the last memory will be cleared and the recording mode will be re-entered.
-
Press the “Play” button for the first time to play the recorded notes, and press the Play” button for the second time to stop playing
-
Press the “Play” button to exit the recording mode.
-
If no notes have been recorded before, there is no action will occur when you press “Play” button.
- Drum Kit
Press this button to get the drum’s tone on the corresponding keys.
88 keys drum kit corresponding table
Bluetooth APP functions:
Phone connection
Popean connection:
- Search and download Popean APP from App store of the iPhone.
- Open the Popean App after turning on the Bluetooth of the iPhone, select any song, and choose to start playing after entering. song, and choose to start playing after entering.
- Click on the upper right of the iPhone screen , and then you can choose: connect to the piano through: Blue Tooth-Confirmed, next confirm to connect to the piano.
- After confirming Bluetooth connection, the icon is displayed as blue check mark ,
GarageBand connection:
- Open GarageBand App
- Tum on Bluetooth on your phone.
- Open GarageBand App and click the Settings icon in the upper right comer of the screen.
- Connect the piano’s Bluetooth through the: Song Settings – Advanced – Bluetooth MIDI Devices.
Perfect Piano and Piano Bar connection:
- Download the Perfect Piano App and Piano Bar.
- Turn on Bluetooth on your phone.
- First connect the GarageBand App. When them is connect successfully, then open the Perfect Piano App and Piano Bar can be used directly.
Android phone connection:
Popean connection:
- Search and download Popean APP from App store of the mobile phone.
- Turn on the Bluetooth function, some phones need to turn on the phone location function.
- Open the Popean App to select any song, and choose to start playing after entering.
- Click on the upper right of the mobile phone screen , and then you can choose connect to the piano through: Bluetooth – Confirmed, next confirm to connect to the piano.
- After confirming Bluetooth connection, the icon is displayed as blue check mark .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>