OBABY R1-0-1 Stamford Classic Sleigh Toddler Rail Instructions

May 15, 2024
OBABY

OBABY R1-0-1 Stamford Classic Sleigh Toddler Rail Instructions
OBABY R1-0-1 Stamford Classic Sleigh Toddler Rail

IMPORTANT KEEP FOR FUTURE REFERENCE

Safety Warnings

Thank you for choosing to be part of the Obaby family

Our toddler rails confirms to BS 8509:2008 + A1:2011. To ensure that your cot bed and toddler rails are used in accordance with these instructions, please read them fully.

Your child’s safety may be affected if you do not follow these instructions.

WARNING: A child’s safety is your responsibility.
WARNING: Assembly should be carried out by a competent adult only.
WARNING: Do not use more than one mattress in the cot bed.
WARNING: Do not place this child’s bed near heat sources, windows and other furniture.
WARNING: Be aware of the risk of open fire and other sources of heat, such as electric bar fires, gas fires, etc in the near vicinity of the cot bed.
WARNING: Do not use this child’s bed if any part is broken, torn or missing.
WARNING: Do not leave anything in the cot bed or place the cot bed close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blinds/curtain cords etc.

  • This product is intended for use from 2 years old up to 4 years old.
  • We recommend you use the Obaby Mattress Size 140 x 70 cm for this cot bed. The mattress should be no more then 30mm shorter or narrower than the internal length or width of the cot bed.
  • Regularly check that all fittings and compnents of the cot/bed are fully tightened and in working order.
  • Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed next to other furniture or windows, and should be placed either tight to the wall or have a gap of 300mm between the wall and the side of the bed.
  • All assembly fittings should be tightened properly and care should be taken to ensure that no screws are loose, as a child could trap parts of the body, or clothing (e.g. ribbons, drawstrings, necklaces) this could lead to strangulation.
  • During assembly children should be kept away from the product due to possible risk of injury.
  • Wood is a natural material, the colour will darken with age.
  • Use only spare parts approved by the manufacturer.

Care & Maintenance

For cleaning, use only a mild detergent and warm water.

  • DO NOT USE BLEACH
  • DO NOT USE any abrasive substances.
  • From time to time, check your cot for loose screws, and worn parts. Replace or adjust the parts as needed.

Due to constant updating and improvments, some components may occasionally differ slightly from the images shown in these instructions. We reserve the rights to change the specifications of any products without prior notice. If you need any assistance please contact your Obaby retailer from whom you purchased your product, who will take appropriate action.

If you are happy with your product & service from Obaby please leave a review on our Trust Pilot Page x

Parts List

Installation
Parts List
Stage 1
Assembly Instructions
Stage 2
Assembly Instructions
 Official Obaby
  obabyuk
camera Icon obabyuk
officialobaby
QR Code
OBABY  Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals