OBABY Astrid Mini Cot Bed Instruction Manual
- May 15, 2024
- OBABY
Table of Contents
OBABY Astrid Mini Cot Bed
Specifications
- Product Name : Astrid Mini Cot Bed
- Version: R1-0-1
- Designed in the UK
- Conforms to BS EN 716-1:2017 and BS 8509:2008 + A1:2011
Product Usage Instructions
Safety Warnings
Thank you for choosing the Astrid Mini Cot Bed. To ensure your child’s
safety, please follow these important safety warnings:
- Assembly should be carried out by a competent adult only.
- Do not use more than one mattress in the cot bed.
- Avoid placing the cot bed near heat sources, windows, or other furniture.
- Avoid the risk of an open fire and other heat sources near the cot bed.
- Do not use the cot bed if any part is broken, torn, or missing.
- Avoid leaving any items in the cot bed that could pose a suffocation or strangulation hazard.
Routine Care & Maintenance
For cleaning, use a mild detergent and warm water. Do not use bleach or
abrasive substances. Regularly check for loose screws and worn parts,
replacing or adjusting them as needed.
Assembly Instructions
- Refer to the Parts List provided.
- Use a cross-head screwdriver for assembly.
- Follow the step-by-step assembly stages outlined in the manual.
- Tighten fittings as necessary using the appropriate tools.
Safety
Safety Warnings
Thank you for choosing to be part of the Obaby family
Our Cot Bed confirms to BS EN 716-1:2017 and BS 8509:2008 + A1:2011. To ensure
that your cot bed is used by these instructions, please read them fully.
Your child’s safety may be affected if you do not follow these instructions.
- WARNING: A child’s safety is your responsibility.
- WARNING: Assembly should be carried out by a competent adult only.
- WARNING : Do not use more than one mattress in the cot bed.
- WARNING: Do not place this child’s bed near heat sources, windows, and other furniture.
- WARNING: Be aware of the risk of open fire and other sources of heat, such as electric bar fires, gas fires, etc in the near vicinity of the cot bed.
- WARNING : Do not use this child’s bed if any part is broken, torn, or missing.
- WARNING: Do not leave anything in the cot bed or place the cot bed close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blinds/curtain cords etc.
- This product is intended for use from birth up to 4 years old.
- Please be aware that the lowest base position is the safest and the base should always be used in that position as soon as the baby is old enough to sit unaided.
- The thickness of the mattress chosen should be such that the internal height (surface of the mattress to the upper edge of the cot frame) is at least 500mm when the base is set in the lowest position and a minimum of 200mm when the cot base is set in the highest position.
- We recommend you use the Obaby Mattress Size 120 x 60 cm for this cot bed. The mattress should be no more than 30mm shorter or narrower than the internal length or width of the cot bed.
- Regularly check that all fittings and components of the cot/bed are fully tightened and in working order.
- To prevent injury from falls, as soon as the child can climb out of the cot, it should be changed into bed mode for use up until 4 years of age.
- The cot bed is designed to be dismantled for storage or transportation.
- Children are likely to play, bounce, jump, and climb on beds, therefore the child’s bed should not be placed next to other furniture or windows and should be placed either tight to the wall or have a gap of 300mm between the wall and the side of the bed.
- All assembly fittings should be tightened properly and care should be taken to ensure that no screws are loose, as a child could trap parts of the body, or clothing (e.g. ribbons, draw-strings, necklaces) which could lead to strangulation.
- During assembly, children should be kept away from the product due to the possible risk of injury.
- Wood is a natural material, the color will darken with age.
- Use only spare parts approved by the manufacturer.
Routine care & maintenance
Care & Maintenance
For cleaning, use only a mild detergent and warm water.
- DO NOT USE BLEACH
- DO NOT USE any abrasive substances.
- From time to time, check your cot for loose screws, and worn parts. Replace or adjust the parts as needed.
Due to constant updating and improvement, some components may occasionally differ slightly from the images shown in these instructions. We reserve the rights to change the specifications of any products without prior notice. If you need any assistance please contact your Obaby retailer from whom you purchased your product, who will take appropriate action.
Don’t forget to leave a review on our trust Pilot Page x
PARTS LIST
Assembly
Converting into a Day Bed
SCAN
FAQ
- Q: What should I do if I have missing or damaged parts?
- A: If you have missing or damaged parts, please contact your baby retailer for assistance. They will help you with the appropriate action needed.
- Q: Can I use any mattress with the Astrid Mini Cot Bed?
- A: It is recommended to use only one mattress with the cot bed to ensure safety and proper fit. Using more than one mattress may pose a risk to your child.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>