MAGIDEKOR 187987 Window Privacy Film One Way Sun Blocking Instructions

PACKING INCLUDE TOOLS

OTHER TOOLS YOU WILL NEED

THANKS FOR YOUR PURCHASE
24/7 CUSTOMER SERVICE
SERVICE@NTFORTUNE.CN

INSTALLATION STEPS

1. Clean all residue, dirt from window.

2. Measure window dimensions Cut the window film about 1 inch/2.5 cm larger than the measurement.

3. Sprey a lot of weter on the window film and windows.

4. Tear off the release backing paper.

5. Apply the window film to the glass.
   Use the squeegee to remove excess weter and bubbles.

6. Trim off the encess film.

7. Towel away water from edges.

8. well done!

REMARKS:

• This window tint Rim uses non-adhesive static cling. tt is easy to install and remove without leaving a residue.
• Can’t not be use on the dual paned glass/frosfed glass/other specially crafted glass.
• The static cling window film is suggested to apply on the inside of the window.
• More soapy water will avoid air bubbles and make the window film stick well.
• When the inside light is stronger than the outside light the window tint CANNOT provide privacy.
• Remember to draw curtains during the night.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>