SOWER AND SEED DAFrw-7T7vI Arched Black Medicine Cabinet With Mirror Installation Guide

SOWER AND SEED DAFrw-7T7vI Arched Black Medicine Cabinet With Mirror

Product Information

Specifications:

• Product Name: Sower and Seed Cabinet
• Weight Capacity: 20 pounds (9kg)

Product Usage Instructions

Surface Mounting Installation:

1. STEP 1: Remove mirror door (see page 10 for screw removal)
2. STEP 2: Locate timber support beams inside the wall using a stud finder.
3. STEP 3: Position cabinet carcass in desired location and ensure unit is level.
4. STEP 4: Securely fasten the cabinet to the timber support beams using the fixings provided (at least 1 screw top and bottom shall be directly into support beam) use wall plugs for any screws that cannot be screwed into timber support.
5. STEP 5: Reconnect door carefully.

Recessed Mounting Installation:

1. STEP 1: Back of carcass. Remove mirror door (see page 10 for screw removal)
2. STEP 2: Lay carcass facedown and measure the back of the unit.
3. STEP 3: Use the measurements for the wall cut out size. Cut and remove section of drywall.
4. STEP 4: Re-enforce wall with additional timber to allow for adequate support for unit.
5. STEP 5: Insert carcass into the wall (the lip should conceal any gaps or holes) securely fasten screws into the side of the cabinet into timber supports.
6. STEP 6: Reconnect door carefully.

Door Hinge Alignment:
Only remove the 2 screws on the door panel to remove the door/mirror during installation.

FAQ

Missing Parts: If any parts are missing, contact Sower and Seed via your order page for assistance.

SOWER AND SEED
Installation Guide:

WARNING

• We recommend this product be installed by a qualified tradesperson and would expect the installation to be completed in a professional tradesman like manner.
• Please inspect the product prior to installation to ensure no damage has occurred during transit.
• Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally discarding parts or hardware.
• Note: Maximum total weight capacity of this product is 20 pounds (9kg)

MISSING PARTS CONTACT:
Sower and seed via your order page.

TOOLS REQUIRED

• PENCIL.
• DRILL
• TAPE MEASURE.
• STUD FINDER.
• DRY WALL CUTTER (IF RECCESS)
• LEVEL.

PARTS INCLUDED

• 1 X CABINET WITH MIRROR DOOR.
• 2 X SHELVES
• 8 X HOLDERS.
• 4 X SCREW
• 4 X WALL PLUG (IF MOUNTING ON TILES)
• 4 X STICKERS (TO CONCEAL SCREW HOLES)

Surface Mounting Installation

1. Remove mirror door (see page 10 for screw removal)
2. Locate timber support beams inside the wall using a stud finder.
3. Position cabinet carcass in desired location and ensure unit is level.
4. Securely fasten the cabinet to the timber support beams using the fixings provided (at least 1 screw top and bottom shall be directly into support beam) use wall plugs for any screws that cannot be screwed into timber support.
5. Reconnect door carefully.

Recessed Mounting Installation

1. Remove mirror door (see page 10 for screw removal)

2. Lay carcass facedown and measure the back of the unit .
   .

3. Use the measurements for the wall cut out size. Cut and remove section of dry wall.

4. Re-enforce wall with additional timber to allow for adequate support for unit.

5. Insert carcass into wall (the lip should conceal any gaps or holes) securely fasten screw into the side of the cabinet into timber supports.

6. Reconnect door carefully.. .
   

Door Hinge Alignment

Only remove the 2 screws on the door panel to remove the door/mirror during installation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>