T A Solitaire P-SE Open Back Headphones User Manual
- May 15, 2024
- T A
Table of Contents
T A Solitaire P-SE Open Back Headphones
Specifications
- Connection Types: 6.35 mm Stereo, 4.4 mm Stereo (Pentaconn),XLR-4-Pin
- Connection Cable Types: Asymmetric, Symmetric
Product Usage Instructions
Safety Notes
For your safety, it is essential to read the operating instructions thoroughly
and adhere to the safety guidelines provided.
Avoid continuous loud listening through headphones to prevent permanent
hearing loss.
Avoid using headphones in situations that require special attention, such as
when driving or performing manual work.
Keep the headphones dry and away from extreme temperatures.
Connecting the Headphones
- Identify the appropriate connection type based on your audio device.
- Ensure a secure connection between the headphones and the audio source.
Wearing and Adjustment
Properly position the headphones over your ears for optimal sound quality
and comfort.
Adjust the headband to fit securely but comfortably on your head.
Storage
When not in use, store the headphones in a cool, dry place away from direct sunlight or extreme temperatures.
Changing the Connecting Cable
- Disconnect the current cable from the headphones.
- Connect the new cable securely, ensuring proper alignment of the connectors.
Care and Maintenance
Regularly clean the ear pads and dust protection to maintain hygiene and
optimal performance.
Refer to the user manual for specific instructions on replacing ear pads or
cleaning the headphones.
FAQ
- Q: Can I use these headphones for activities that require special attention?
A: It is recommended not to use headphones in situations that require special attention, such as in road traffic or during manual work, to ensure safety.
Welcome
The Solitaire P-SE you are holding in your hands is our second set of
headphones, and it also represents your first step into the world of T+A
planar headphones. In terms of technology, the Solitaire P-SE is closely
related to the Solitaire P, whose harmonious blend of sound, appearance and
feel has been celebrated worldwide by customers and magazines.
In common with every other T+A product, the Solitaire P-SE epitomises the peak
of technological progress, and reflects our desire to extend the limits of
knowledge by a small amount every day. Since 1978 we have been inspired by
this spirit of curio-sity, which manifests itself in every T+A product.
The following pages will help to familiarise you with your new Solitaire P-SE, but the best introduction is simply to experience them with all your senses: their casing is an exciting re-interpretation of characteristic T+A design elements, while the new TPM 2500 planar-magnetostatic transducer provides huge physical advantages which give far superior sound compared with electro- dynamic headphones. Congratulations on your new T+A headphones, and we offer you a warm welcome into our world of applied science, precision and music.
Notes
Text passages marked with this symbol contain important information which must
be observed if the machine is to operate safely and without problems.
This symbol marks text passages that provide supplementary notes and
background information; they are intended to help the user understand how to
get the best out of the machine.
All components used in the product comply with the applicable German and
European safety norms and standards.
This product complies with EU directives. If required, the declaration of
conformity can be found at www.ta-hifi.com/DoC.
Safety notes
For your own safety please consider it essential to read these operating instructions right through, and observe in particular the notes regarding operation and safety.
-
The operating instructions are an integral part of the headphones. If you ever transfer the product to a new owner please be sure to pass them on to the purchaser to guard against incorrect operation and possible hazards.
-
Very loud continuous listening to program material via headphones can lead to permanent loss of hearing. Prevent health risks and avoid permanent hearing at high volume.
-
Do not use the headphones if your activity requires special attention (e.g. in road traffic or for manual work).
-
Keep the headphones dry and do not expose them to extremely low or extremely high temperatures, such as direct sunlight or heat from radiators, hair dryers, etc.
-
Liquid or particles must never be allowed to get inside the unit through the openings.
-
Protect the unit from drips and splashes of water.
-
Since the headphones generate a permanent magnetic field, a distance of at least 30 cm should be kept from pacemakers and implanted defibrillators (ICDs).
-
The headphones should only be cleaned with a soft, dry cloth. Do not use harsh cleaning agents or sol vents!
-
The headphones should not be stored permanently on glass dummy heads, an armrest or the like, as the headband may be widened and the contact pressure of the earcups might be reduced.
-
If the unit gets very cold (e. g. when being transported), condensation may form inside it. Please do not switch it on until it has had plenty of time to warm up to room temperature so that any condensation evaporates completely.
-
If the device has been in storage, or has not been used for a protracted period (> two years), it is essential to have it checked by a specialist technician before re-use.
-
If the unit is damaged, or if you suspect that it is not functioning correctly, immediately disconnect the mains plug at the wall socket, and ask an authorised T+A specialist workshop to check it.
-
The headphones should only be opened by a qualified specialist technician. Repairs should be entrusted to an authorised T+A specialist workshop. With the exception of the connections and measures described in these instructions, no work of any kind may be carried out by unqualified persons.
-
Keep the headphones, accessories and packaging out of the reach of children and pets to prevent accidents and risk of suffocation.
-
In its original condition the unit meets all currently valid European regulations. It is approved for use as stipulated within the EC.
By attaching the CE symbol to the unit T+A declares its conformity the EC directives and the national laws based on those directives. The declaration of conformity can be downloaded from www.ta-hifi.com/DoC. The original, unaltered factory serial number must be present on the outside of the unit and must be clearly legible! The serial number is a constituent part of our conformity declaration and therefore of the approval for operation of the device. The serial numbers on the unit and in the original T+A documentation supplied with it (in particular the inspection and guarantee certificates), must not be removed or modified, and must correspond. -
Infringing any of these conditions invalidates T+A conformity and approval, and the unit may not be operated within the EC. Improper use of the equipment makes the user liable to penalty under current EC and national laws.
-
Any modifications or repairs to the unit, or any other intervention by a workshop or other third party not authorised by T+A, invalidates the approval and operational permit for the equipment.
Only genuine T+A accessories may be connected to the unit, or such auxiliary devices which are themselves approved and fulfil all currently valid legal requirements.
The device is designed for operating temperatures between +10 … +40°C. This device is designed exclusively for reproducing sound in the domestic environment. It is to be used in a dry indoor room which meets all the recommendations stated in these instructions. Where the equipment is to be used for other purposes, especially in the medical field or any field in which safety is an issue, it is essential to establish the unit’s suitability for this purpose with the manufacturer and to obtain prior written approval for this usage.
If the headphones need to be stored, place them in their original packaging
and store them in a dry, frost-free location. Storage temperature range 0…45
°C
The only permissible method of disposing of this product is to take it to your
local collection centre for electrical waste.
Registration according to the EU directive “Waste Electrical and Electronic
Equipment”
WEEE-Reg.-No.: DE 72473830
Scope of delivery
- SOLITAIRE P-SE (Open planar magnetostatic headphones)
- Connection cable with 6.35 mm stereo jack plug (unbalanced)
- Connection cable with 4.4 mm stereo jack plug (balanced, Pentaconn*)**
- Connection cable with XLR-4-pin connector (balanced)**
- Operating instructions
- Packaging (storage box)
Pentaconn“ is a registered trademark of NIPPON DICS Co, Ltd. and complies with
RC-8141C JEITA standard.
Depending on the product variant XLR-4-pole or 4,4 mm Pentaconn connection
cable is included.
Connecting the headphones
Connection cable
The SOLITAIRE P-SE is equipped with exchangeable connecting cables. So the headphones can be adapted optimally to the requirements of different amplifiers. Select the appropriate cable according to the type of connection of your amplifier and the connection types delivered with your headphones.
-
6,35 mm Stereo jack (unbalanced)
-
4,4 mm Stereo jack (balanced, Pentaconn)
-
XLR-4-pole connector, balanced
-
Insert the earcup connectors into the openings as shown in figure 2.
-
Please note the markings on the plug and on the headphones for the right and left channels. The plugs are also marked with a colored ring. Red indicates the right-hand side and blue the left-hand side.
-
Insert the plugs until they are properly snapped into place and the plug housing is flush with the earcup (Fig. 3).
If your amplifier is equipped with both connection types (balanced and unbalanced), we recommend the use of the balanced connection cable (4.4 mm, Pentaconn or XLR-4-pole) for maximum sound quality.
Using the headphones
Wearing and adjustment
- Put on the headphones as shown below and observe the markings for the right and the left side on the inner side of the headband.
- The earcups can be adjusted in height in fine increments for a comfortable fit.
- Adjust the height of the earcups by pulling them out or pushing them in so that the ear pads surround the ear and do not rest on the ear. This is the only way the headphones can achieve their full sound potential.
- For optimum fit, adjust the right and left earcups to the same height.
Storage
As long as the headphones are not being used, they should be stored in a dry
and dust-free place. The supplied box is very well suited for this purpose.
Do not store the headphones permanently on a glass head, armrest or similar.
Doing so may cause permanent damage to the headband and ear pads.
Changing the connecting cable
Disconnect the plugs from the earcups
- To change the connection cable, pull the plugs straight down out of the earcups.
- Grasp the plugs directly at the bend protection (see illustration). Do not pull on the cord; always grasp the plug!
- Connect the required connection cable as described in the chapter „Connecting the headphones“.
Pin assignment of the plugs
Care and maintenance
Replacing the ear pads
- To remove the ear pad, grab underneath the pad from the inside and lift it off as shown in the picture.
- If necessary, gently press against the outside of the pad with your thumb to push the fixing lugs out of the cutouts.
- To attach the ear pads, put the pad on loosely and align it so that the lugs are in line with the cutouts.
- Carefully insert each lug into the corresponding cutout, one at a time.
Cleaning the dust protection
- The red dust protection in front of the driver mem-branes can be removed for cleaning.
- First remove the ear pad as described above.
- Remove the dust protection.
- Clean the dust protection with warm, clear water and let it dry completely in the air.
- Refit the dust protection so that the edge does not protrude over the housing of the earcup.
- Attach the ear pad.
Never use the headphones without the dust protection. The dust protection will prevent any damage to the diaphragm by foreign matter. Take care that no foreign matter gets inside through the openings of the earcups.
Cleaning the headphones
Wipe the headphones only with a soft, dry and lint-free cloth.
When cleaning, make sure that no foreign objects get inside through the
openings.
Fresh-Up-Service
Depending on how often the headphones are used, the pads and dust protection
should be replaced from time to time for hygienic reasons. For this we offer a
Fresh-Up-Service.
If you wish, all pads (including the headband padding) and the dust protection
will be replaced. In addition, the headphones are completely cleaned and
checked for perfect performance.
You can find more information at www.ta-hifi.de/en/support/support-
solitaire-p-se/
Technical specifications
We reserve the right to alter the specifications
- T+A elektroakustik GmbH & Co. KG
- Planckstraße 9 – 11
- 32052 Herford | Germany
- T +49 5221 76760
- F +49 5221 767676
- info@ta-hifi.com
- www.ta-hifi.com