SEALEY AP36MWS Mobile Workstation 10 Drawer 1140mm Instructions
- June 4, 2024
- SEALEY
Table of Contents
AP36MWS Mobile Workstation 10 Drawer 1140mm
Instructions Manual
MODEL NO: AP36MWS & AP45MWS
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE
FOR FUTURE USE.
Refer to instructions
SAFETY
‰ WARNING! Ensure Health & Safety, local authority, and general workshop
practice regulations are adhered to when using this product.
DO NOT open more than one drawer at a time.
DO NOT step on the drawers.
DO NOT let children play with the roll cab.
Ensure all drawers are fully closed and the self-locking catches are
activated, before moving the toolbox.
Secure the brakes when the roll cab is in the desired position.
Keep the work area clean, and uncluttered, and ensure there is adequate
lighting.
DO NOT use in damp work areas.
‰ WARNING! The warnings cautions, and instructions referred to in this
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood that common sense and caution are factors
that cannot be built into this product, but must be applied by the operator.
INTRODUCTION
AP36MWS:
A heavy-duty mobile workstation with 7 drawers and a cupboard. Drawers run on
45mm ball-bearing slides with a weight capacity of 40kg per drawer. All
drawers are fitted with aluminum handles and 2.5mm EVA non-slip liners. The
cupboard and drawers lock separately for safe storage. All panels are made of
perforated steel for hook storage. Supplied with two shelves to be mounted as
required. Top of workstation lined with 10mm EVA mat. Four alloy style 5”
castors, two fixed and two swivels with quick-release brake. Steel handle at
either end for easy mobility.
AP45MWS:
A heavy-duty mobile workstation with 10 drawers. Drawers run on 45mm ball-
bearing slides with a weight capacity of 40kg per drawer. All drawers are
fitted with aluminum handles and 2.5mm EVA non-slip liners. Two sets of
drawers lock separately for safe storage. All panels are made of perforated
steel for hook storage. Supplied with two shelves to be mounted as required.
Top of workstation lined with 10mm EVA mat. Four alloy style 5” castors, two
fixed and two swivels with quick-release brake. Steel handle at either end for
easy mobility.
SPECIFICATION
Model No:…………………………………………….AP36MWS …………………………………. AP45MWS
(W x D x H):
Overall Size: ………………………… 1090 x 730 x 1025mm …………………..1290 x 730 x 1025mm
Small Drawer: ……………………… 568 x 398 x 75mm (x5) ………………….568 x 398 x 75mm (x6)
Medium Drawer: …………………. 568 x 398 x 154mm (x2) ………………..568 x 398 x 154mm (x3)
Large Drawer (x1): ……………………………………………N/A ………………………568 x 398 x 233mm
Cupboard: ……………………………….. 600 x 255 x 470mm ……………………………………………. N/A
ASSEMBLY
4.1. Attach the handles (parts 2&3) using the supplied screws (part 4) to
cover the ends of the screws by using part 5.
4.2. Slot the hooks into place using the perforations on the workstation as
shown in fig.1.
OPERATION
-
WARNING! Only open one drawer at a time and DO NOT overload the drawers, fig.2 shows the maximum weight per drawer size.
5.1. When moving the roll
cab, ensure that the drawers are closed and locked to prevent accidental
opening. Release the brakes as shown in fig.5 and move the roll cab using the
handles to maintain full control. When the roll cab has been moved to the
required location, lock the brakes (fig.5). -
WARNING! DO NOT move across slopes of more than 5° as the roll cab may tilt over (fig.4).
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories, and packaging should be sorted, taken to a recycling center, and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications, and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: The guarantee is 12 months from the purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
****sales@sealey.co.uk
www.sealey.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>