kapok HST23401 Full Body Shower System with Body Jets Installation Guide

: May 15, 2024
: kapok

kapok HST23401 Full Body Shower System with Body Jets Installation Guide

INSTALLATION CONSIDERATIONS

3OHDVH UHDGRYHUWKHVH LQVWUXFWLRQV WKRURXJKO\EHIRUHEHJLQQLQJLQVWDOODWLRQ0DNH VXUH WKDW \RXKDYH DOOWRROV DQGVXSSOLHVQHHGHGWRFRPSOHWH WKHLQVWDOODWLRQ
)RUEHVWUHVXOWVZH UHFRPPHQGV WKDWWKLVXQLWEH LQVWDOOHGE\ D OLFHQVHGSURIHVVLRQDOSOXPEHU
DNH VXUH LQOHWSLSHV DQGVXSSO\ YDOYHVKDYHEHHQLQVWDOOHGDQGFOHDQHG DOVRHQVXUHQRLPSXULWLHV LQSLSHOLQH
$IWHULQVWDOODWLRQ FKHFN DOO MRLQWV IRUOHDNDJHV

TOOLS REQUIRED

PRODUCT LIST

SHOWER PARTS IDENTIFICATION DIAGRAM

STEP 1: Layoutshower head power / water pipe

STEP 2: Measure shower head holes on ceiling

STEP 3: Install fix frame

Shower installation fixed frame A

STEP 4: Layout water pipe

STEP 5: Install shower head

STEP 6: Connect water inlet pipe

STEP 7: Connect LED & audio power line

STEP 8: Testing the water

STEP 9: Shower installation

INSTALL BODY JET

The product is equipped with G1/2 specifications connectors or interfaces, and it is recommended that users use G1/2 specifications connectors or interfaces.
The G1/2 connector or interface is compatible with the NPT1/2 connector or interface. If you use the NPT1/2 connector or interface, please wrap enough blocking tape on the connector or interface.
Cutoff excess partwith a saw. Put on the decoration cover, then screw the body jet in.

INSTALL HANDHELD SHOWER

Screw the thread into the water pipe inside the wall.
Screw the handheld shower holder into the thread.
Fix the handheld shower holder with the allen key.
Connect handheld shower and the hose.

BLUETOOTH MUSIC PLAYING

Bluetooth Name: Music Shower System – . Putthe power on the showerand the speaker will automatically enter pairing mode, then continue to step 2.
O The speakerwill try to establish a connection with the last connected
Bluetooth device. If the device is nearby, a Bluetooth connection is automatically established and two beeps will be heard.
Run the pairing program on the Bluetooth device to detect the speaker.
When the Bluetooth device displays the list of detected devices, select[Music Shower System].
Ifapassword isrequired on the Bluetooth device display, enter “0000”.0 Apassword can be called a”code”, “PIN”, “PIN number” or “password”.
Once the Bluetooth connection has been successfully established, youwillhear twobeeps.
.1fthe Bluetooth connectionis not established, repeat fromstep 1.