alpho DPX 1500W Downconverter Instructions

May 15, 2024
alpho

alpho-logo

alpho DPX 1500W Downconverter

alpho-DPX-1500W-Downconverter-product-image

Product Information

Specifications

  • Product Name: DPX 1500W Downconverter
  • Part Number (PN): 0120098-001
  • Electrical Input Voltage: Dependent on cable gauge, number of pairs, and load power
  • Output Voltage: 1
  • Output Power: 1500W
  • Output Current: Varies based on load
  • Load Regulation: Yes
  • Features: LED Protection

Product Usage Instructions

  1. Electrical Connection
    Ensure the input voltage matches the requirements based on cable gauge, number of pairs, and load power. Connect the cables securely.

  2. Output Voltage Adjustment
    Use appropriate tools to adjust the output voltage to the required level. Follow the provided guidelines for safe adjustment.

  3. Load Regulation
    Monitor the load regulation to ensure stable performance. Adjust as needed to maintain optimal operation.

  4. LED Protection
    Observe the LED indicators for any protection alerts. Take necessary actions as indicated in the manual.

Frequently Asked Questions (FAQ)

  • Q: What should I do if the LED protection indicator is flashing?
    A: If the LED protection indicator is flashing, it indicates a potential issue with the system. Refer to the user manual for troubleshooting steps or contact customer support for assistance.

  • Q: Can I adjust the output power of the downconverter?
    A: The output power of the downconverter is fixed at 1500W. It is not recommended to attempt adjusting it as it may cause damage to the device.

DPX 1500W Downconverter

INSTRUCTIONS

  • Type 6 rated enclosure provides maximum flexibility for various installation options (pole, wall, underground, or aerial)
  • Extended operating temperature for deployment in the harshest outdoor environments
  • Remote monitoring via the Cordex® HP controller system offers advanced monitoring and control of the single output channel including power cycling, voltage, and current readings
  • Class 4 rated input circuit for fault managed safetyalpho-DPX-1500W-Downconverter-01
  • The DPX 1500W downconverter is part of the distributed power transport product family specifically engineered using the new Alliance for Telecommunications Industry Solutions (ATIS®) fault managed power distribution technology. The DPX 1500W downconverter converts the incoming ±190 VDC voltage to 48 VDC to power a multitude of communications devices such as small cells, remote radio heads (RRH), and Internet of Things (IoT) devices.
  • The device provides one isolated output from a single 12 AWG (4 mm²), 14 AWG (2.5 mm²), or 18 AWG (0.75 mm2) hybrid or copper cable. This output can deliver a maximum of 1500 watts at 48 VDC of total power to remote communication equipment from the DPX power source enclosure system. The maximum distance between the DPX power source enclosure system and the DPX 1500W downconverter is dependent on cable gauge, number of pairs, and load power.
  • Distributed power transport architecture enables operators to deploy their network faster by eliminating the need to have AC utility power at each small cell location. At a central location, the central power hub converts the incoming AC power to fault managed power which is transported over a hybrid or copper only cable to a disconnect box and then to a down converter device. This reduces installation and operating expenses, and provides flexibility related to site selection for the installation of the remote communications equipment.

DPX 1500W Downconverter
PN: 0120098-001

Specifications

Electrical| | Environmental|
---|---|---|---
Input Voltage| Nominal: ±190 V| Operating Temperature| −40 to 131°F (−40 to 55°C)|
Operating: ±158 to ±200 V| Full rated output up to 104°F (40°C)|
Output Voltage 1| 56 VDC| Storage Temperature| −40 to 185°F (−40 to 85°C)|
Output Power| Maximum: 1500 W| Relative Humidity| 5 to 95% non-condensing|
Minimum: 0 W| Elevation| Up to 4,921 ft (1,500 m); derated to 9,842 ft (3,000 m)|
Output Current| 31.25 A (maximum) at 48 VDC| Enclosure Rating| Type 6|
Load Regulation| <±3% (static)| Regulatory Compliance|
Features| Safety|

  • Design to be compliant with IEC/EN/CSA/UL 62368-1
  • Design to be compliant with UL 1400-1

|
LED| Bicolor status/alarm LED|
EMC|

  • Design to be compliant with FCC CFR 47 PART 15/B – Class A
  • Design to be compliant with CAN ICES-003(A)/NMB-003(A)
  • Design to be compliant with ETSI EN 300 386
  • Design to be compliant with EN IEC 61000-4-2
  • Design to be compliant with EN IEC 61000-6-4: 2019
  • Design to be compliant with EN 61000-6-2: 2019
  • Design to be compliant with EN 55032: 2015 + A11: 2020
  • Design to be compliant with EN 55035: 2017 + A11: 2020
  • Design to be compliant with ANSI/IEEE C62.41 Category B3

|
Protection|

  • Current limit and short circuit
  • Input reverse polarity
  • Output high voltage shutdown
  • Power limiting
  • Over temperature protection

|
Mechanical|
Dimensions H × W × D| 8 × 18 × 4.3 in. (203.2 × 457.2 × 109 mm)|
Weight| 23.6 lb (10.7 kg)| 1 Output voltage is floating.|
Connection| Input: 1| |
Output: 1 (isolated)|
Mounting| Pole, Wall, Underground, Aerial|
Communication| Power Line Communication (PLC)|

  • EnerSys World Headquarters 2366 Bernville Road,
  • EnerSys EMEA
    • EH Europe GmbH,
    • Baarerstrasse 18,
    • 6300 Zug
    • Switzerland
  • EnerSys Asia
    • 152 Beach Road,
    • Gateway East Building #11-08, Singapore 189721
    • Tel: +65 6416 4800

© 2024 EnerSys. All rights reserved. Trademarks and logos are the property of EnerSys except IEC®, CSA®, UL®, ETSI®, ANSI® and IEEE®, which are not the property of EnerSys. Subject to revisions without prior notice. E.&O.E

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals