FiberbuiltGolf com T-660-4X6 Performance Turf Series Tee Box Instructions
- May 15, 2024
- FiberbuiltGolf com
Table of Contents
com
Performance Turf series
Tee Box – 6’x4’
T-660-4X6
Parts & assembly
Please check your box for accuracy.
All of these pieces should be included.
| ITEM | PART NUMBER | QTY. |
|---|---|---|
| A | TLCM-C-2 | 4 |
| B | TLCM-E-2 | 2 |
| C | TLCM-P-2 | 6 |
| D | TLCM-P-4 | 2 |
| E | TLCM-PINS50 | 1 Bag |
| F | 660-TL-4X8 | 1 |
Assembly Instructions
1. Ensure the ground is properly prepared for placement of the rubber base.
The surface should be firm, packed and level. Concrete, asphalt, patios or
decking are ideal. (Do not place on grass.)
Place the rubber base pieces (A, B) on the ground together as
shown.
2. Secure rubber base
pieces (A, B) together by pushing Connectors into adjacent holes in the
sections.
Optional Step: For
increased security and stability, install and secure Connectors with pins from
underneath as you assemble the base pieces. (If the mat will be regularly
moved or disassembled, we recommend skipping the use of the pins.)
Steps for securing the pins:
- As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (E) into the holes from underneath.
- From the top, push the rubber 2-pin (C) or 4-pin (D) Connectors into position, guiding them onto the plastic push pins.
- Gently tap with a hammer until the connectors are flush with the base surface.
3. Lay the Performance Turf (F) on top of the base area to fit the
frame.
4. Insert real tees
anywhere on the Performance Turf to practice all kinds of tee shots.
Finished Product
Double the Life of
Your Warranty Today for Free
For a free one-year extension to our standard warranty, exclusive access to
insider deals, new product information and much more, register your mat today
at: FiberbuiltGolf.com/register
Be sure to select the following:
Performance Turf series
Tee Box – 6’x4’
SKU#: T-660-4X6
FiberbuiltGolf.com
833.328.3218