HSM P425 Cardboard Shredder Instruction Manual

: May 15, 2024
: HSM

Table of Contents

HSM P425 Cardboard Shredder
Product Information
Product Usage Instructions
Frequently Asked Questions
Intended use, warranty
Transportation and installation
Overview
Display and control panel
Operation
Troubleshooting
Disposal/Recycling
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HSM P425 Cardboard Shredder

Product Information

Specifications:

Model: ProfiPack P425
Intended Use: Manufacture of packaging padding made from cardboard
Warranty: 2 years (6 months for multiple shifts)

Product Usage Instructions

1. Explanation of Symbols and Safety Instructions

Before starting the machine, read the manual and keep it for future reference. Observe all safety instructions:

Risk of injury from the cutting unit – do not reach into the paper feed slot.
Avoid injuries from sharp blades and being pulled in.
Do not use near children. Service work by authorized personnel only.

2. Transportation and Installation

Connect the power cable to a suitable power source as per specifications on the nameplate. Ensure the cable is unobstructed.

3. Display and Control Panel

The machine may come with a built-in suction device for dust extraction. Connect the suction device if needed.

4. Operation

Feed cardboard into the machine.
Press the Forward button to start the cutting unit.
Adjust the operating speed using the +/- buttons.
Use the adjustable limit stop for positioning.
Switch off the machine after use.

Frequently Asked Questions

Q: What should I do if the Ready for Operation display does not illuminate?
- A: Check the power connection and ensure the machine is properly plugged in. Contact customer service if the issue persists.
Q: Can I operate the machine at different speeds?
- A: Yes, you can adjust the operating speed in 4 levels using the adjustment buttons on the control panel.

Intended use, warranty

The Profi Pack P425 is exclusively designed for the manufacture of packaging padding made from cardboard. The machine comes with a 2 year warranty. The warranty period is 6 months when used in multiple shifts. The warranty does not cover wear, damage caused by improper handling, natural wear or the intervention of third parties.

Explanation of symbols and safety instructions

Before starting up the machine for the first time, read the operating manual, and keep it for later use and to pass on to any subsequent users.

Please observe all of the safety instructions attached to the Profi pack.

Risk of injury from the cutting unit
- Cutting injuries are possible because of the sharp cutting unit.
Risk of injuries from sharp blades!
- Never reach into the slot of the paper feed.
Risk of injury from being pulled in!
- Do not go near the infeed opening with long hair, loose clothing, ties, scarves, necklaces, bracelets etc. Do not shred any material that tends to form loops, e.g. tapes, bindings and soft plastic film.
Danger to children and other persons!
- This equipment is not suitable for use in locations where children are likely to be present.

Danger from electric current

Dangerous mains voltage can lead to electrocution in the event of improper handling of the machine.

Check the machine and cable regularly for damage.
Switch off the Profi pack and disconnect from the power supply in the event of damage, or improper operation and also before changing location or cleaning.
Make sure that the power plug is easily accessible.
Before you insert the power plug, make sure that the voltage and frequency of your power supply comply with the information on the nameplate.
Prevent liquids from getting into the Profi pack.
The machine must not be placed in the vicinity of a radiator or other heat source.
The ventilation slots must not be blocked or covered and there must be at least 5 cm space between the shredder and any wall or furniture.
Never pull the plug out of the socket using the power cable. Always pull out the plug directly.

Service work may only be carried out by HSM customer service and the service engineers from our contract partner. For our customer service addresses

Transportation and installation

Connect the power cable to the machine. The machine must be connected to a power source that meets the specifi cations on the nameplate. Make sure that the power cable is unobstructed and that nobody can tread on it. Connect the power plug of the machine into a properly installed socket.

Lock the front castors by pressing down the brake lever

Note:

The HSM Profi Pack 425 can also be supplied with a built-in suction device. Using a suction device you can extract dust while processing the cardboard. If your device has a built-in suction device, there is a connection for the suction device on the right side (9). If your device does not have this apparatus, you can fi t the components later when needed.

Profi Pack conversion kit:
Order number x.xxx.xxx.xxx
Dust extractor:
Order number 2.412.111

Overview

Feed opening
Safety notice
Warning sticker/type plate
Operator control panel
Emergency stop button
Limit stop
Rolls
“Slide” flap
Connection for suction device
Cable holder

Display and control panel

$HSM-P425-Cardboard-Shredder-FIG $11$$

Forward button
Stop button
Reverse button
Settings buttons
“Speed” display
“Ready for operation” display
“Blockage” display

Operation

Switching the system on

Unlock the emergency stop button by turning it anti-clockwise.
Move the power switch at the right-hand side to position “I”.

The “Ready for operation” display flashes.

The “Ready for operation” display illuminates constantly after a short period of time. The machine is ready to operate.
Press the “Forward button”. The cutting unit starts up.
The operating speed can be controlled in 4 levels using the – and + adjustment buttons. Changing the settings during operation is possible.

Adjustable limit stop

Lever up: For moving
Lever down: Limit stop fixed

Feed in cardboard $HSM-P425-Cardboard-Shredder-FIG $14$$

Cardboard is processed at a width of up to 425 mm.
Wider cardboard is automatically trimmed.
The cutting unit is switched off using the stop button.

Switch off

Switch the mains switch on the right side to position “0”.

CAUTION

Removing material residue

Observe the following for all work on the compression flap: Wear gloves.

Perforating cardboard

Lever (1) is in a lower position
The catch bolt is engaged
Feed in the cardboard $HSM-P425-Cardboard-Shredder-FIG $16$$

Padding cardboard

Pull catch bolt (1)
Pull lever (2) upwards.
Feed in approx. 2 linear metres of cardboard
Push the lever (2) downwards.
Feed in the cardboard $HSM-P425-Cardboard-Shredder-FIG $17$$

Remove material residue when changing from “Padding cardboard” to “Perforating cardboard”.

Switch off the machine. Turn the power switch to the “0” position.
Remove residual material on the pressing plate by hand.
Switch on the machine. Turn the power switch to the “I” position.
Push in compact cardboard to order to clear the shaft of any residual material.
Remove any remaining residual material by hand

Troubleshooting

Blockage

Press the “Reverse button” to remove material in the event of problems.

The cutting unit reverses slowly and slides the cardboard back.

Note

If a large quantity of cardboard has already been pulled in before the blockage occurred, you can also press the forward button. This makes the cutting unit run forward slowly and shred the remaining cardboard. During this function, the “Ready for operation” and “Blockage” indicators flash alternately. For all other malfunctions, check whether the motor was overloaded before contacting our customer service. Let the machine cool down for approx. 15 – 20 mins. before restarting

Cleaning

Switch off the machine and disconnect the power plug. When cleaning, only use a soft cloth and a mild soap-water solution. However, no water must enter the equipment.

Disposal/Recycling

Dispose of the machine in an environmentally sound way at the end of its service life. Observe the current regulations when doing this. As legislation is subject to ongoing changes, we request that you contact your local authorities at the appropriate time. As the manufacturer, HSM would be glad to advise you on the disposal of your old machine.

Technical data

$HSM-P425-Cardboard-Shredder-FIG $19$$

This document shredder meets the applicable harmonisation legislation of the European Union:

Low Voltage Directive 2014/35/EU
EMC directive 2014/30/EU
RoHS directive 2011/65/EU

The EU declaration of conformity can be requested from the manufacturer.

Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
The EU declaration of conformity can be requested from the manufacturer.

HSM GmbH + Co. KG