LAGENIO G16 Bluetooth Smartwatch User Manual
- June 10, 2024
- LAGENIO
Table of Contents
LAGENIO G16 Bluetooth Smartwatch
Downloading the App
Scan the following QR code, download and install the App.
Scan QR Code and Download
Charging and Active
Charging the device to active before the first time using, To charge your
device. plug the charging cable Into the adapter or USB part on your computer.
Pairing
The MAC address on the setting-About page could help you identify your device
on the scanning list.
Use the Touch Screen
Smart Watch Features
Sleep
If you keep wearing Smart Watch in your sleep , it can provide the hours slept
and quality of sleep stats on both the screen and the APP.
NOTE: Sleep stars reset to zero at 8:00pm.
Heart Rate Test
The Smart Watch could record your heart rate all day.
You also could tap on the page to start measuring heart rate.
Sports
Smart Watch automatically tracks Steps taken on the screen.
NOTE: Your movement stats reset to zero at midnight,
Training
Tap the training icon on the menu to start a new training measure recording.
there are 8 sport modes to be chosen. The last training recording will be
shown on the training page.
Blood Pressure Test
Tap on the blood pressure page to start measuring your blood pressure.
On the blood pressure page, It can shown the blood pressure measured data of
the last times.
Sp02Test
Tap the Sp02 page to start measuring your SpD2.
on the Sp02 page, It can show the Sp02 measured data of the last times,
weather
It could show the weather info of current and tomorrow on the weather page.
Weather info is synced after connecting with the App , it will not be updated
after a long disconnected.
Messages Reminder
The device can Sync incoming notifications from Twitter, Face book, WhatsApp,
Instagram etc Recently 5 messages can be Started.
Note; You can switch of/off the Incoming notification In the APP.
Remote Shutter
After connecting the device you can remote control the Camera on your phone.
Player Shutter
After connecting the device, you can remote control the music player on your
phone.
Other Features
Other feature include stopwatch, alarm,, timer, brightness mute on/off,
theater mode factory reset power off and about.
stop watch
Tap the start button on stopwatch page to start timing, and tap the stop
button to stop timing.
Silent Alarms
Set up the Alarm on the APP, the device will vibrate to remind on time.
Theater Mode
The device will turn off the vibration and turn down the brightness when the
theater mode is turned on.
Note: You can turn on/off the theater mode in the control center.
Remind to Move
The device will vibrate to remind you to make a relax after 1 hour sitting.
Note; You can ,witch on /off the feature in the APP.
Remind to Drink
The smart watch will Remind you Time to Drink Some Water” at The planned
drinking time.
Note: You can set the feature In the APP.
Getting to Know Your Device
-
Using in Wet Conditions
Your device is water-resistant which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout.
NOTE: Do not swim with your Smart Bracelet. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24ll does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on. -
Using Quick View
With Quick View you can check the time or the message form your phone on your Smart Bracelet without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.
General Info & Specifications
-
Environmental Conditions
Operating temperature: 14°F to 122°F (-10°c to 50°Q
Non-operating temperature: -4°F to 140°F (-20°C to 60°Q -
Size
Fits a wrist between 5.5 and 7.7 inches in circumference. -
Disposal and Recycling
Please kindly be aware that it is the consumer’s responsibility to property dispose and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility.
For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.
This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. The device complies ,.with RF specifications when the device used at 5mm from your body. The product shall only be connected to a USB interface of version USB2.0
Visit the Web site http: ,.www.commnunitake.com
Manufacturer’s Name: HK LAGENIO TECHNOLOGY CO., LIMITED.
Product Name: Bluetooth smartwatch
Model number: Gl6
This product can be used across EU member states.
RF Specification
Function| Operation Frequency| Max RF output power :|
Limit
---|---|---|---
EOR| 2 402M Hz- 2480MHz| -6.21dBm| 20 dBm.
BLE| 2402M Hz- 2480M Hz| 7.79 dBm| 20 dBm.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the
following two conditions: ( 1) this device may not cause harmful interference,
and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and o n, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
-
For the following Radio equipment: Bluetooth smartwatch Product name/ Number (s): Bluetooth smartwatch / G16, TS90156, APEX, INFINITI, G16A, G16B
Tradename or Brand: N/A
Software: MOY-KIC3-2.1 .2
Hardware number: MOY.M80156.01 -
Name and address of the manufacturer: Room 1405,14/F.,LUCKY CENTER,165 WANCHAI ROAD,WANCHAI HK China
Manufacturer: HK LAGENIO TECHNOLOGY CO., LIMITED. -
This declaration of conformity is issued under the sole responsibility of the Manufacturer.
-
Object of the declaration (identification of the radio equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):
-
The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU (RED)
-
References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared:
Referenced Standards:Article 3.2 Radio:| ETS I EN 300 328 V2.2.2 €2019 – 07);
Article 3.1 EMC:| ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.4 (2020-09)
EN 55032:2015
EN 55035:2017
EN 61000-3-2:2014
EN 61000-3-3:2013
Article 3.1a Safety:| EN 62368-1:2014+A11:2017
Article 3.1a Health| EN 62479:2010; -
Notified Body Name: Eurofins Electrical and Electronic Testing NA, Inc.
Notified Body Number: 0980
Notified Body Assessment Performed: Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3 Technical File •Identification Number: N/A -
Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity: User instructions are provided in the User Manual.
The Software and Hardware versions are specified above. -
Additional information:
Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum.
Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorization of use. Please refer to the User Manual for details.
On behalf of:
Manufacturer: HK LAGENIO TECHNOLOGY CO., LIMITED.
Add: Room 1405, 14/F.,LUCKY CENTRE, 165 WANCHAI ROAD,WANCHAI HK China
(place and date of issue): 2022/08/26