WALKIE DJXL6K Interphone Talkie Set 200m Range Noise User Manual
- May 15, 2024
- WALKIE
Table of Contents
WALKIE DJXL6K Interphone Talkie Set 200m Range Noise
Specifications
- FCC ID: 2BEAJBBSKJ-DJXL6K
- Model: DJXL6K
- Dimensions: [Insert dimensions here]
- Weight: [Insert weight here]
- Power Source: [Insert power source information]
- Material: [Insert material used]
Product Overview
Unboxing and Setup
When you receive your DJXL6K, carefully unbox it and ensure all components are included. Follow the setup instructions provided in the manual to assemble the product correctly.
Powering On
Connect the DJXL6K to a power source using the provided cable. Press the power button to turn on the device. Wait for the indicator light to confirm that the product is powered on.
Operating the Device
Use the control panel or remote (if included) to navigate through the different settings and features of the DJXL6K. Refer to the user manual for detailed instructions on each function.
Maintenance and Care
Regularly clean the DJXL6K using a soft, dry cloth to remove any dust or debris. Avoid exposing the product to extreme temperatures or moisture to ensure its longevity.
FCC ID: 2BEAJBBSKJ-DJXL6K
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
- All controls, adjustments and switches that are instructed in the manual or follow-up instruction provided by the manufacturer may be operated or adjusted without resulting in a violation of FCC rules.
- Any adjustment that could result in a violation of FCC rules and recommended that could be performed only by or under the immediate supervision and responsibility of a person certified as technically qualified to perform transmitter maintenance and repair duties in this radio service by an organization or committee representative of users of that service.
- Changes or modifications i.e. replacing any transmitter component (crystal, semiconductor, etc.) not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.