MiaLuz MZLL0540SW Linear Luminaire Instruction Manual
- May 15, 2024
- MiaLuz
Table of Contents
Linear luminaire with optics
REFERENCIAS
MZLL0540SW
MZLL0540SB
MZLL1040SW
MZLL1040SB
MZLL2040SW
MZLL2040SB
MZLL0540SW Linear Luminaire
- Attention: Read the instructions in the installation manual carefully.
- The product must be installed in accordance with the instructions.
- Before any installation or handling of the product, disconnect from the electrical current.
- Do not damage the electrical connection parts.
- If any part of the luminaire is broken, replace it immediately with a new one
- Electronic products are not toys. Keep them away from children.
- The light source in this luminaire must only be replaced by the manufacturer or its technical service.
- Screw the elements to the ceiling, at the point where you want to place the cable.
- Insert the end of the cable into the brake located on the profile.
- Press the upper part of the brake to unlock it and allow the cable to circulate. Adjust until the fixture is at the desired height and balanced.
- If there are more profiles to be assembled, place the next one right next to it and repeat the process.
Valencia – Spain (+34) 962 811 002
www.alverlamp.es
Documents / Resources
|
MiaLuz MZLL0540SW Linear
Luminaire
[pdf] Instruction Manual
MZLL0540SW Linear Luminaire, MZLL0540SW, Linear Luminaire, Luminaire
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>