Hired Gun Offroad B4WK12753 Jeep XJ Gutter Rail Accessory Mounting System Instruction Manual

Table of Contents

Hired-Gun-Offroad-B4WK12753-Jeep-XJ-Gutter-Rail-Accessory-Mounting-System-
PRODUCT

Specifications:
- Model: Jeep XJ Gutter Rail Accessory Mounting System
- Part Numbers: B4WK12753, B4WK12754, B4WK12756
- Material: Stainless Steel

Step 1: Planning and Mockup
- Plan and mockup the desired location of the brackets. These brackets clamp to the drip rail without crushing the trim. Ensure the mounting location is clean and consider using anti-seize. It is recommended to use a barrier like tape or weather stripping to protect the paint.
Step 2: Clearance Check
- After locating the brackets, check for clearance with doors and other hardware. Adjustments or modifications may be necessary based on chassis and door alignment.
Step 3: Installation of Accessories
- Once the brackets are in place, install the accessories such as a light bar. Tighten the hardware until the split washer is flat and the brackets are securely in place.
FAQ
- Q: Can I install this mounting system on any Jeep XJ model?
- A: The mounting system is designed specifically for Jeep XJ models. Ensure compatibility before installation.
- Q: Do I need to use all the parts mentioned in the Bill Of Materials?
- A: The Bill Of Materials lists the components included in each kit variant. It is recommended to use all parts provided for proper installation.

Thank you for purchasing our Jeep XJ Gutter Rail Accessory Mounting System!

This Product is intended to be used as a starting point for building a roof rack or mounting accessories using the gutter or drip rail on the Jeep Cherokee XJ.
The Brackets are raw steel and require painting before installation.
The hardware is stainless steel and anti-seize is recommended.
After installation recheck the bolts at least every oil change.

Contents of each available kit

Bill Of Materials for B4WK12753

Step1: Plan and mockup the desired location of the brackets. These brackets clamp to the drip rail as shown below. Be sure the mounting location is clean, use anti-seize and do not crush the drip rail trim. While it is optional a barrier to protect the paint is recommended this can be tape or thin weather stripping.

Hired-Gun-Offroad-B4WK12753-Jeep-XJ-Gutter-Rail-Accessory-Mounting-System-
FIG-1

Step 2: Once the brackets have been mocked up and located you need to check clearance. Check the functionality of the doors and hardware clearance with the roof. Depending on the condition of the chassis and door alignment adjustment or modification could be needed.
Step 3: With the brackets loose and in location, install the light bar or other accessories in the desired location and tighten the hardware until the split washer is flat and the brackets are tight.

The content of all pages of this website (collectively, the “Website”), such as text, graphics, images, information and other material (collectively, “Content”) is for informational purposes only.
Any information furnished on this Website is not intended nor implied to be automotive advice and is not intended to replace personal consultation with a qualified automotive service technician, mechanic, or similar automotive professional.
Barnes 4WD has not examined the Content for accuracy, timeliness, completeness, appropriateness, or helpfulness.
Barnes 4WD does not endorse any specific tests, products, procedures, opinions, or other information that may be mentioned on this Website.
Your reliance upon information and Content obtained by you at or through this Website is solely at your own risk.
IN NO EVENT SHALL BARNES 4WD BE LIABLE OR OTHERWISE RESPONSIBLE FOR ANY DAMAGE OR INJURY (INCLUDING DEATH) TO YOU, OTHER PERSONS, OR PROPERTY ARISING FROM ANY USE OF ANY PRODUCT, INFORMATION, IDEA, OR INSTRUCTION CONTAINED IN THE CONTENT.
BARNES 4WD DOES NOT MAKE ANY REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, AT LAW OR IN EQUITY, FOR ANY PRODUCT FEATURED ON THE WEBSITE, INCLUDING WITHOUT LIMITATION CONCERNING MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, VALUE, VALIDITY, OR ENFORCEABILITY, AND ANY AND ALL SUCH OTHER REPRESENTATIONS OR WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.