TIANYUN HQBB-888 Preschool Kids Tricycle Instruction Manual

TIANYUN HQBB-888 Preschool Kids Tricycle

Use Notice

1. When children ride, the janitor must not leave, do not near the fire.
2. Before use, please check whether the parts are installed in place and connected tightly.
3. Avoid prolonged use or storage in wet, cold or high temperature environments, and keep away from fire and strong heat sources.
4. Do not use the car at the threshold of the door, near the stairs and uneven ground, so as not to hurt your children.
5. Children riding, and do not allow other children to push.
6. Do not ride on slopes, roads, streets
7. The maximum weight of this product is 75kg, do not overweight use.
8. Please read the instruction manual carefully before using the product, and keep it in a safe place for future reference.
9. If you do not operate in accordance with the instructions may affect the safety of children.

Parts

• Handlebar
  

• Front Wheel

• Seat

• Rear Wheel

• Axle

• Front Frame

• Rear Frame

• Screw Pack
  

1. Rear wheel spindle cover
2. Rear wheel spacer
3. Rear wheel pins
4. Seat screws
5. Front wheel screws
6. Frame screws
7. Handlebar Screw

Installation Steps

1. Assemble the rear wheel
   Install the rear wheel after the wheel axle through the small hole in the middle of the rear pedal install the wheel put a spacer on both side of the wheel fix it with a pin through the small hole in the rear axle and finally cover the bearing protection cover.
   

2. Assemble the frame
   install the frame Align the front end of the rear frame with the 4 small holes on the front frame and tighten them with screws.
   

3. Assemble the front wheel
   Install the front wheel: insert the handlebar into the front both sides of the wheel, align the small hole and use screw to tighten

4. Assemble handlebar
   Handlebar installation: the handlebar is connected to the front of the frame, and then tighten the screws t0 fix it.

5. Assemble the seat
   Installation of seats first remove the nuts on the car seat, then put the car seat 0n the front frame, align he small holes and tighten the screw.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>