DELIPOP 30917712 Sputnik Light Fixture Instruction Manual
- May 15, 2024
- DELIPOP
Table of Contents
DELIPOP 30917712 Sputnik Light Fixture
Parts List
The following list details the parts included for the ceiling lamp installation:
| Part | Description | Quantity |
|---|---|---|
| 1 | Screw | 2 |
| 2 | Plastic anchor | 3 |
| 3 | Nut | 3 |
| 4 | Chain link | 3 |
| 5 | Wrench | 1 |
| 6 | Wire connector | 1 |
| 7 | Decorative cover | 1 |
| 8 | Adjustable pole | 1 |
| 9 | Mounting bracket | 2 |
| 10 | Allen key | 3 |
| 11 | Electrical box cover | 1 |
Installation Steps
Step 1: Preparing the Electrical Box
Ensure the power is switched off at the breaker box before starting the installation.
- Locate the electrical box where the ceiling lamp will be installed.
- Remove the existing electrical box cover (if present).
- Attach the mounting bracket (9) to the electrical box using the provided screws (1).
Step 2: Wiring the Lamp
Wire the ceiling lamp following these steps:
- Thread the wires through the adjustable pole (8).
- Connect the lamp wires to the house wires using the wire connectors (6).
- Attach the decorative cover (7) to hide the electrical box and connections.
- Secure the adjustable pole (8) to the mounting bracket (9) using the screws (1) and the Allen key (10).
Step 3: Finalizing the Installation
Complete the installation with these final steps:
- Assemble the chain links (4) and attach them to the lamp.
- Use the nuts (3) to secure the chain links (4) and ensure stability.
- Adjust the length of the adjustable pole (8) as desired.
Step 4: Powering the Lamp
To power the ceiling lamp:
- Ensure all connections are secure and the mounting is stable.
- Turn the power back on at the breaker box.
- Switch the lamp on to check if it is working properly.
FAQ
- How do I ensure the power is off before installation?
- Turn off the power at the breaker box for the area where you are installing the lamp. Use a voltage tester to confirm the power is off.
- What should I do if the lamp doesn’t turn on after installation?
- Check the connections between the lamp wires and house wires. Ensure that the power is on at the breaker box and the lamp switch is in the ON position.
- Can I adjust the length of the adjustable pole?
- Yes, the adjustable pole can be modified to your desired length before securing it to the mounting bracket.
- What tools will I need for the installation?
- You will need a wrench (5) and an Allen key (10) which are included, plus a voltage tester which is not provided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>