LASTAR LS-CM022 LED Floor Therapy Lamp Instruction Manual
- May 15, 2024
- Lastar
Table of Contents
LASTAR LS-CM022 LED Floor Therapy Lamp
Specifications
- Model: LS-CM022
- Light Source: LED
- Operate Voltage: 24V=1A
- Power: 24W
Product Information
The LASTAR LEDFLOORTHERAPYLAMP comes with a remote control for easy operation. It features various modes including Night Light, Brightness Adjustment, Color Adjustment, Leisure Mode, Reading Mode, and more. The lamp can be easily assembled and disassembled for convenient storage or transport.
Model: LS-CM022 Manual
Remote Control
- Power Supply
- Night Light
- Brightness Adjustment +
- Color Adjustment –
- Brightness Max
- Color Adjustment +
- Brightness Adjustment
- Leisure Mode
- Reading Mode
- 1 Hour Timer
- Entertainment Mode
- Office Mode
Note: Remote control and floor lamp reset pairing operation.
Product Diagram
- Lamp holder
- Light pole part
- Control panel
- Light pole part
- Base
- Power connector
Assembly and Disassembly
Align the connection head and the light, then fix the lamp onto the pole.
Install the base, and tighten the screws to secure.
Connect the power buckle and the cord to light the therapy lamp.
To assemble the lamp, align the connection points of the lamp head and light pole parts, then tighten the screws. Connect the power cord to the power connector to use the therapy lamp.
How to Use
- Timer Button: Short press to set timing function for 15, 30, 45, or 60 minutes.
- One Key Maximum Brightness: Short press to adjust brightness to maximum.
- Color Temperature Button: Adjust color temperature from 6000K to 3000K in a cycle.
- Brightness Button: Adjust brightness from 5% to 100% in a cycle.
- Power Button: Turn the lamp on or off.
Precautions
It is recommended to use the therapy lamp for 20-30 minutes each morning. Consult your doctor before use if you have certain medical conditions or are taking medication that may cause photosensitivity. If you experience any adverse effects, discontinue use and seek medical advice.
Warranty & Customer Support
This product is intended for domestic use only. LASTAR will repair or
replace parts of the product within 12 months from the date of purchase.
- Manufacturer: Shenzhen Chuangxinjia Technology Co., Ltd
- Address: Room 908 Block A, Zhongguan Times Square, No.4168 Liuxian Avenue, Nanshan District, Shenzhen, China 518000
- Email: service@lastarhome.com
FAQ
What should I do if I experience eyeaches or headaches after using the lamp?
These symptoms may occur initially but should diminish with continued use as your body adjusts to the therapy.
Is light therapy safe for everyone?
Light therapy is generally safe, but it's advisable to consult your doctor before starting treatment if you have specific health concerns.
How often should I use the therapy lamp?
Recommended daily usage is 20-30 minutes, preferably in the morning hours.
What should I do if I experience eye strain or headaches?
These symptoms may occur initially but should subside over time. If they persist, switch off the light and contact a doctor.
How do I reset the remote control and floor lamp pairing?
Hold the brightness key for 5 seconds. If the remote control indicator flashes, press any key within 10 seconds to complete the pairing.
Can I use this lamp for longer periods?
It is not recommended to overuse the lamp. Stick to the advised 20-30 minutes per session.
Is there any FCC compliance information I should be aware of?
Yes, the device complies with Part 15 of the FCC Rules. It should not cause harmful interference and must accept any interference received, including that which may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>