Ferrisland B0CJ4L59CB 3 Tier Tabletop Fountain Indoor Instruction Manual
- May 15, 2024
- Ferrisland
Table of Contents
Instruction Manual
Fountain
Assembly instructions
B0CJ4L59CB 3 Tier Tabletop Fountain Indoor
Please refer to parts letters when assembling.
If you need some more installation videos or warranty information & return
policy, please Scan QR cord
https://gift.ferrisland.com/thank-you-card
ASSEMBLY INSTRUCTIONS:
STEP 1-POSITION STATUE PORTION OF FOUNTAIN ON AN EVEN SURFACE. PUSH LED TO THE
HOSE AND THEN CONNECT THE PUMP TO THE HOSE (AS SHOWN).
STEP 2 – POSITON BOWL ON EVEN SURFACE, PLACE STATUE PORTION OF FOUNTAIN ONTO
BOWL-BASE. LET OUT THE POWER CABLE FROM BACK OF THE FOUNTAIN
STEP 3 – FILL THE FOUNTAIN WITH WATER AND ENSURE THE PUMP IS COMPLETELY
SUBMERGED IN WATER
STEP 4 – PLACE SMALL STONES AND CANDLES ON THE FOUNTAIN AS YOU LIKE.
STEP 5- ENSURE THE CABLE IS POSITIONED TO FORMADRIP LOOP SO THAT NO WATER CAN
SEEP FROM THE BACK TO THE MAIN OUTLET/PLUG.
STEP 6 – ONCE FOUNTAIN ISASSEMBLED, INSERT PLUG INTO PROPER OUTLET.
WATER MAY TAKE ASHORT TIME TO BEGIN FLOWING AS AIR CLEARS FROM THE PUMP TO THE
HOSE. WATER FLOW ISADJUSTABLE BY LEVER ON SIDE OF THE PUMP.
BE SURE TO DISCONNECT FROM THE MAIN OUTLET
BEFORE MAKING ANY FOUNTAIN ADJUSTMENTS
IF THE WATER SPLASH OUT OF THE FOUNTAIN OR IF YOU WANT THE WATER RUN SLOWER,
YOU CAN ADJUST THE SWITCH ON THE PUMP
WARNINGS:
-FORINDOOR USE ONLY.
-CHECK FOR LEAKS & SPLASHING AFTER INITIAL SET-UP.
-DONOT LEAVE FOUNTAIN RUNNING FOR LONG PERIODS OF TIME AND NEVER UNATTENDED.
-CHECK THE AREAAROUND FOUNTAIN REGULARLY TO ENSURE NO LEAKAGE.
MAINTENANCE:
-KEEP WATER CLEAN TO REDUCE MINERAL BUILD-UP, CLEAN PERIODICALLY.
-THE PUMP MUST ALWAYS BE FULLY SUBMERGED IN WATER (EVEN WHEN NOT IN USE) AND NEVER BE PERMITTED TO RUN DRY AS THIS COULD CAUSE PERMANET DAMAGE.
ALSO, WITHOUT SUFFICIENT WATER, IT WILL ALSO CAUSE NOISE.
-DISCONNECT THE POWER & EMPTY BASIN IF THE FOUNTAIN WILL NOT BE IN USE FORAN EXTENDED TIME.