Jinmo 110MB01N Magnetic Levitation Keyboard User Manual
- May 15, 2024
- Jinmo
Table of Contents
Jinmo 110MB01N Magnetic Levitation Keyboard
Power On/Off &Charging
- After opening the keyboard cover, it will automatically power on. After closing the cover, the keyboard will automatically power off.
- After opening the keyboard cover, it will automatically power on. After closing the cover, the keyboard will automatically power off.
- After opening the keyboard cover, it will automatically power on. After closing the cover, the keyboard will automatically power off.
Indicator light
- BT indicator: After powering on, the Bluetooth indicator light will flash quickly, indicating that the keyboard is in Bluetooth pairing mode.
- Once the keyboard is connected to the tablet via Bluetooth, the Bluetooth indicator light will turn off.
- Cap lock indicator: After powering on, the Bluetooth indicator light will flash quickly, indicating that the keyboard is in Bluetooth pairing mode.
- Once the keyboard is connected to the tablet via Bluetooth, the Bluetooth indicator light will turn off.
- Battery indicator: Press option
- Charging indicator: When charging with the USB cable inserted, the light will be in a breathing flashing state.
- When the keyboard is fully charged, the light will stay on.
Bluetooth connection
- After opening the keyboard cover, the keyboard will automatically power on, and the display screen in the middle of the keyboard will light up.
- At this time, the bluetooth indicator light will flash rapidly, indicating that the keyboard has entered Bluetooth pairing mode.
- In the “Settings” menu, tap on the “Bluetooth” menu. Bluetooth connection
- Turn on the “Bluetooth” switch, and the iPad will automatically search for Bluetooth keyboard devices.
- Discover the Bluetooth keyboard device: 110MB01GH, and tap on it. The Bluetooth keyboard will automatically connect.
- In the “Settings” menu, tap on the Bluetooth” menu.
- After a successful Bluetooth connection, the pairing indicator light will turn off, and the device will be displayed as “Connected” in the Bluetooth device list.
Keyboard layout
New function
iOS Touch Gestures
Please note
- Operating System: iOS 15.0 and above (device must support touch control).
- Tap Settings (after successful wireless pairing): Settings – General – Trackpad -Tap to Click/Assistive Touch (enable).
- Sensitivity Settings: Settings – General – Trackpad – Tracking Speed (adjust to suitable speed).
- Trackpad (no physical button version): No “Drag” gesture function option.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital desert prent to are 15 of the Celer Then inde in drained to This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Come to the spring bet on the turn find racing from that to which the receiver is connected.
- consult the dealer or an experienced radio/TV technician for help.
RF waming for Portable device
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.