XDK Rehabilitation SMY-01 Smart Sleep Device User Manual

XDK Rehabilitation SMY-01 Smart Sleep Device

Specifications

• Product name: Smart Sleep Device

• Model: XDK-SMY-01

• Dimension: 76mm33mm15mm

• Implementation standards: Q/XS J05-2023

• Weight: Approx 75g

• Charging port: Type-C

• Input: 5V/120mA

• Charging time: 2 hours

• Using time: 7 hours 20 minutes

• Single working time: 20 minutes

• Modes:

  • Mode T1: 0.5Hz, pulse width 250ms-1000ms
  • Mode T2: 1.5Hz, pulse width 80ms-330ms
  • Mode T3: 100Hz, pulse width 5ms

• Gear level: 5 gears (Strength: 100uA(gear 1), 200uA(gear 2),
  300uA(gear 3), 400uA(gear 4), 500uA(gear 5))

• Color: White, Black, Red, Green, Yellow

• Communication method: Bluetooth

Product Usage Instructions

Chapter 1: Read Before Use

• Do not use the product while bathing or immerse it in any liquid.
• Avoid using the product when operating complex or dangerous equipment, driving, or preparing to drive.
• Avoid placing electrodes near the heart, wounds, or bruises.
• Only use the product for its specified purposes as per the instruction manual
• Avoid disassembling the product.
• Repairs or upgrades should only be done by authorized service personnel.
• Avoid using unapproved accessories as they may affect product effectiveness and safety.
• Avoid using the product with high-frequency surgical equipment or certain therapy devices.

Chapter 2: Product Information

Principle of Action: The device uses micro-current stimulation therapy to stimulate the brain and improve sleep quality.

Applicable People: Suitable for insomniacs, those with sleep issues, anxiety, and tension before bedtime.

Cautious Users: Individuals with pacemakers, insulin pumps, epilepsy, hemorrhagic stroke, broken skin on the ear, metallic objects on the head should avoid using the device.

Composition of the Product

The product includes the main body, ear clip electrodes, gaskets, and other components as shown in Figure 1.

Packing List

Ear clip cable
Conductive liquid
Gaskets| User manual
Warranty Card
Certificate

Replacement instructions: Do not use the product if there are any malfunctions without solving them by authorized service personnel.

Frequently Asked Questions

Q: Can this device be used by individuals with pacemakers?
A: For safety reasons, individuals with pacemakers should avoid using this device.

Q: How long should each session with the Smart Sleep Device last?
A: Each session should last for about 20 minutes.

Q: Is it safe to use this device while driving?
A: No, it is not safe to use this device while driving or preparing to drive.

Smart Sleep Device

XDK Rehabilitation

XDK (Shenzhen) Rehabilitation Technology Co., Ltd.
Add: No. 303, Building 1, Edimonto Industrial Park, Guangming District, Shenzhen Tel: 400-666-5201

Smart Sleep Device User Manual Version: V1.0

Please operate according to the instruction manual

Chapter 1: Read before use

Dear customer, thank you for purchasing this product, please read the contents of this manual carefully before use in order to use the product correctly and fully understand the related warnings and risks. This manual is only used as a reference material for the operation, maintenance and repair of this product, and is not intended for any other purpose. XDK (Shenzhen) Rehabilitation Technology Co., Ltd. (hereinafter referred to as the “XDK”) does not assume any legal responsibility for malfunctions or accidents caused by failure to operate in accordance with the instructions.

Precautions

• Avoid product moisture or contact with water.
• Do not use this product while charging.
• First time to use this product, please charge it first.
• Children need to use under the guidance of a guardian.
• Do not place the product in a place with strong electromagnetic interference.
• Do not pull the ear clip cable.
• Do not use this product while using a phone.
• When using, the electrodes should be in close and even contact with the earlobe.
• If you experience discomfort (headache, dizziness, nausea, etc.) when using the product, please turn down the gear or stop using it.
• Avoid the use of strong gear to the same location for a long time stimulation.

Warning

• Do not use this product while bathing.
• Do not immerse this product in any liquid.
• Do not use this product when operating complex or dangerous equipment.
• Do not use this product while driving or preparing to drive.
• Do not place electrodes in front of or behind the heart and avoid contact with wounds and bruises.
• Do not use this product for purposes other than those specified in the instruction manual.
• Do not disassemble the product.
• Any repairs or upgrades to this product must be performed by our staff or authorized service personnel
• Accessories such as unapproved ear clip cable, conductive liquid, gasket, charging cable, etc. will affect the effectiveness and safety of the product. The resulting personal injury or economic loss, the company does not assume any legal responsibility
• Do not use this product in conjunction with high-frequency surgical equipment, short-wave or microwave therapy devices.

Chapter 2 Product Information

Principle of Action
Micro-current stimulation therapy is a safe, non-invasive physical method. It uses low-intensity micro-current to stimulate the brain, causing the central nervous system to produce sedative endogenous enkephalins, thereby relieving tension and anxiety and improving sleep quality.

Applicable People
Suitable for insomniacs who have difficulty falling asleep, shallow sleep and dreamy, and anxiety and tension before bedtime.

Cautious Users
For safety reasons, we do not recommend this product to the following people.

• Patients with pacemakers, insulin pumps, and other electronic devices.
• People who are operating complex or dangerous equipment.
• People who are driving or planning to drive.
• People with epilepsy.
• People with hemorrhagic stroke.
• People with broken epidermis on the back of the ear or allergies to conductive electrodes.
• People with metallic or magnetic objects on the head.

Composition of the product

The product includes the main body, ear clip electrodes, gaskets and other components, as shown in Figure 1.

• ear clip electrodes
• gaskets
• Host

Figure 1 Smart Sleep Device

Packing List

Replacement instructions: The product should not be used “forcibly” in the event of any malfunction, damage, or known safety problem, without first solving the problem by authorized service personnel of XDK (Shenzhen) Rehabilitation Technology Co. Co.,

Specification

Mode T2 1.5Hz, pulse width 80ms-330ms
Mode T3 100Hz, pulse width 5ms
Gear level| Gear: 5
Gear Strength: 100uA(gear 1), 200uA(gear 2)
300uA(gear 3), 400uA(gear 4), 500uA(gear 5)
Color| White, Black, Red, Green, Yellow
Communication method| Bluetooth

Chapter 3 Product Use

• Gear indicator Gear 1
• Gear indicator Gear 2
• Gear indicator Gear 3
• Gear indicator Gear 4
• Gear indicator Gear 5
• Ear Clip Port
• Gear
• On/Off
• Mode
• Gear +
• Power indicator
• Mode indicator
• Charging port

Figure 2 Mainframe structure

As shown in Figure 2, the main unit contains ear clip connector, Type-C charging connector, gear button, on/off button/mode selection button, power indicator/mode indicator, gear indicator.

Interface
Ear clip interface: connect the ear clips for DreamHome ™ Smart Sleep Device Charging interface: connect the Type-C charging cable to charge the main host.

[Key]

• On/Off/Mode: When shutdown, long press the key, power on; standby, long press the key, shutdown; standby, short press the key to start the work; work, short press the key to switch the work mode.
• Gear+: When working, tap “+” button to increase the gear, the highest gear is 5 gears.
• Gear 1: When working, tap “-” button to lower the gear, the lowest gear is gear 1.

Indicator
Power indicator/Mode indicator

• Blue
• Green
• Orange
• White
• State Description

The instrument is charging and has not reached 100% power.

Power＜20%

The instrument is in a fully charged state or in standby mode in mode T1

• Mode T1 Working state
• Mode T2 Standby mode
• Mode T2 Working state
• Mode T3 Standby mode
• Mode T3 Working state
• Power Off

Note:

1. ‘Blinking’ – on for 1 second, off for 2 seconds.
2. No matter what mode of standby or working state the instrument is in, as long as the power <20%, the blue light will flash
   Gear Indicator
   Mode

Application Software Description

1. How to get the application software.
   Search for “DreamHome” in the cell phone application store or application market, or scan the following QR code to download and install the application.

2. Register account.
   Open “DreamHome”, click “Register Now”, enter your cell phone number and password, and then click “Register”.

3. Login: In the login screen, enter your cell phone number and password.
   In the login screen, enter your cell phone number and password, and check “Log in” to indicate that you have read and agreed to DreamHome “Registration Agreement” and “Privacy Agreement” and click “Confirm”.App download

Mini-program description

1. How to download “XDK Dream Home”:
   On the WeChat mini-program, search for “XDK Dream Home”

2. Add Device:
   After entering the app, click “Add Device” to search and connect the smart sleep device, as shown in the Figure 3.

3. Setting parameters:
   After connecting the device, you can check the connection status, power, total working hours, remaining time, working status, as well as selecting the working mode and gear of the device, as shown in Figure 3b.

   • Add Device
   • Setting Parameters

How to use

1. Take out the ear clip electrodes and insert the plug into the ear clip connector of the main unit.

2. Remove the gasket and conductive liquid, respectively, the gasket installed in the two ear clips; each ear clip electrode piece mounted a gasket, and finally fully wet the gasket with conductive liquid (Figure 4).

3. Place the ear clip electrodes in the earlobe area (Figure 5), to ensure that the electrodes are in close and even contact with the earlobe.

4. Long press the on/off button for 3 seconds, the power indicator light is lit; short press the on/off button to switch the mode that suits you.
   There are 3 modes: mode T1(comfort) – green light, mode T2 (stimulation) – orange light, mode T3 (enhancement) -white light.

5. When working, short press “+” or “_” button to adjust the stimulation intensity.
   Each mode has 5 levels of stimulation intensity (1 to 5, gradually increasing).

Note:

1. Ear clip does not distinguish between positive and negative poles.
2. The default working time is 20 minutes (not adjustable).
3. The gear selection to the earlobes have a faint pinching sensation is appropriate, too high a gear may cause headache, dizziness and other adverse reactions.

Chapter 4. Maintenance and Servicing

• Working and Storage Environment
• Working Environment
• Environmental Temperature
• Relative Humidity
• Atmospheric Pressure
• Storage Environment
• non-condensing
• Failure Analysis and Troubleshooting

working mode

| or| change| the
The ear clips are not in place.| Re-plugging the ear clip cable
Poor contact between the ear clip and the body| Check the position and tightness of the

ear clips

Skin not cleansed before use| Use alcohol pads or water to clean the

epidermis

Failure to replace gasket,

conductive liquid to gasket

| or failure to apply| Replace     with                    new

conductive liquid

| | gasket,| drop
Low power of battery| Use after charging the host
Broken ear clip wires| Contact the manufacturer to replace

the ear clip cable

Instrument Damage| Contact the manufacturer for repair or

replacement

Tingling sensation in the

earlobe

| Ear clip gaskets not replaced or gaskets not placed

properly

| Adjust or replace with new gasket,

drop conductive liquid

| Gear is too high for personal tolerance| Downshift the gear

Cleaning and Maintenance

• Please keep the surface of the product clean; when it is not clean, you can use alcohol to wipe the surface.
• To ensure the effectiveness of the product, please wipe the surface of the ear clip electrode with water regularly.
• If the product is not used for a long time, please turn off the power and recharge the product every 3 months.

Chapter 5 FAQ

and [Warnings].” image-3=”” headline-4=”p” question-4=”Can I adjust the working hours of the device?” answer-4=”No, you cannot. The default working time of the Smart Sleep Device is 20 minutes, after 20 minutes, the device will stop working automatically. You can press the “On/Off button” to start the next 20 minutes.” image-4=”” headline-5=”p” question-5=”Where can I download the app?” answer-5=”You can scan the QR code, or through the WeChat mini program interface, search for “XDK Dream Home”.” image-5=”” headline-6=”p” question-6=”Why don’t I feel anything special after wearing it?” answer-6=”May not replace the gasket, or not drip conductive liquid, or conductive liquid is insufficient. (2) Not wear in the earlobe, or ear clip electrode is not close, even contact with the earlobe. Possible gear selection is low.” image-6=”” headline-7=”p” question-7=”How many times can a gasket be used?” answer-7=”The conductivity of the gasket affects the stimulation effect and experience, so it is recommended that the gasket be replaced every time it is used.” image-7=”” headline-8=”p” question-8=”How long does it take to get results?” answer-8=”The first use can improve the symptoms of insomnia. It is more effective if it is used continuously in phases.” image-8=”” headline-9=”p” question-9=”Are there any adverse reactions?” answer-9=”Too high a gear may cause headache, dizziness and other adverse reactions.” image-9=”” count=”10″ html=”true” css_class=””]

Chapter 6. After-sales Service

Regarding the warranty period (gratuitous repair), it starts from the date of purchase. Within the validity period, you can enjoy the repair, exchange and return in accordance with the provisions of this regulation, the above should be handled with the invoice or relevant valid shopping vouchers. Since the date of purchase within 7 days of the quality problems, consumers can choose to invoice the price of a one-time refund or replacement of the same type of product.
Quality problems occurring within 15 days from the date of purchase, consumers can choose to replace the same model of product quality problems occurring within 12 months from the date of purchase, consumers can choose to repair free of charge.

Certificate
The smart sleep device has successfully passed the production quality inspection, with the following sample certificate of conformity.

• Product Name
• Smart Sleep Device
• Model
• Inspector
• Test Conclusion
• Manufacturer
• XDK (Shenzhen) Rehabilitation Technology Co., Ltd.

Product Warranty

1. The goods within the warranty period can only be warranted by the manufacturer. Please present the warranty card and purchase invoice. Please pay special attention to the following two points.
2. The warranty card will not be reissued if lost, please keep it in a safe place.
3. The warranty card is valid only in mainland China.
4. Warranty will be provided within 1 year from the date of purchase under the condition that the product breaks down under normal use.
5. In the following cases, even within the warranty period, the warranty is not free of charge. We will repair the product for a fee.
6. Damage caused by failure to use, maintain, or store the product in accordance with the requirements of the product’s instruction manual.
7. Damage caused by incorrect operation, breakage (e.g., dropping, etc.).
8. Damage caused by disassembling by yourself.
9. Damage caused by force majeure factors (such as earthquakes, fires, floods, etc.).

• Warranty Card
• Product Model
• Delivery Date
• Contact person
• Address
• Dealer Name
• Dealer’s seal
• Serial Number
• User Name
• Phone
• Dealer Phone

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to perate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pu rsuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no g uarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to rad io or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure co ndition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>