SOUNDLIVING SL36 MOVE Bluetooth Speaker User Manual
- May 15, 2024
- SOUNDLIVING
Table of Contents
SL36 MOVE Bluetooth Speaker
User Manual
HEY YOU!
The Move speaker is your perfect travel partner. Its small size makes it
perfect to carry in your bag. let you don’t be fooled by the size, even though
it’s compact, it can deliver great sound in crystal clear quality. Enjoy it!
SOUNDLIVING MOVE
Thank you for choosing Soundliving Move. Please read this manual to optimize
your experience with the product. Enjoy your new Move!
TECHNICAL SPECIFICATIONS
Bluetooth version: | 5.0 |
---|---|
Control: | Buttons on the side |
Battery: | 2200 mAh |
Play time: | ≈ 15 hours |
Input: | Type USB-C |
Transmission frequency: | 2.4 GHz |
LED light: | 7 settings and can be turned off |
Speaker unit: | Φ52mm 4Ω 10W x 2 |
Water repellency: | IP66 |
Connection: | AUX or Bluetooth |
Net weight: | ≈ 720 g |
PACKAGE CONTENT
AUTOMATICK PAIRING
- Connect your Move to your smartphone by pressing and holding the POWER button for one second.
- Your Move will appear in the list of devices in your bluetooth settings.
CHARGING
- To charge your Move, you need to flip up the cover, which is located on the side of the speaker.
- Under the cover you will find the USB-C charging port – insert the included USB-C charging cable into the speaker and charge it via an adapter or PC.
- A red LED diode will light up when your Move is charging, and turn off when it is fully charged.
ANSWER CALLS
- Answer incoming calls with your Move by pressing the TWS button.
- Press once to answer and once to end the call.
- Hold the TWS button for over 2 seconds to reject a call
PLAY MUSIC
- Press and hold the POWER button for 2 seconds to turn on your Move.
- Press the POWER button once to play or pause the music.
- Press and hold the + button for 2 seconds to switch to the next song.
- Press the + button one or more times to increase the volume.
- Press and hold the – button for 2 seconds to switch to the previous song.
- Press the – button one or more times to lower the volume.
- When using AUX cable, you can switch between AUX and Bluetooth by pressing TWS button twice.
TRUE WIRELESS STEREO SETUP
- Start by turning on both speakers. Then the diode flashes blue on both of them.
- During bluetooth pairing, press the TWS button on the primary speaker once to connect it with the secondary speakers, then you can hear ”Right channel” and ”Left Channel” from both of them – they are now connected.
- Connect your smartphone to the main speaker and you can play music from both.
DISABLE TRUE WIRELESS STEREO
- Press the TWS button on one of the speakers to disconnect them.
- The two speakers are no longer connected and only your primary speaker will play music
WARNING
- Do not wash the speaker when the USB cover is open or loose
- Do not use alcohol, thinner, detergent, shampoo or other solvents for cleaning purposes.
- Do not intentionally submerge under water.
- Do not wash the speaker in the washing machine.
- Do not expose your speaker to extremely high or low temperatures.
- To avoid electric shock, do not disassemble your speaker in any way.
- Do not throw your speaker into a fire. The battery can explode and cause personal injury or death.
- Only charge the battery in accordance with the company’s instructions.
- The speaker is not completely waterproof where the sound is emitted, the sound may be muffled if water gets in.
- When this happens, hold the speaker and clap 10-20 times to remove the water. Place a dry cloth under the speaker for 2-3 hours.
Note:
-
It is recommended to dry the device for 24 hours in a dry environment before charging after exposure to water.
Warning: -
The risk of explosion increases if the battery is replaced with an incorrect type.
-
Dispose of used batteries according to instructions.
Instructibons: -
Do not dispose of used batteries with household waste.
-
Battery disposal must comply with local environmental regulations.
www.soundliving.dk
+45 7199 3479
kontakt@soundliving.dk
Unionsvej 11, 4600 Køge