SOUNDLIVING SL35 Wave Beige Headset User Manual
- June 16, 2024
- SOUNDLIVING
Table of Contents
SOUNDLIVING SL35 Wave Beige Headset
Product Information
Technical Specifications
- Bluetooth Version: 5.0
- Active Noise Cancellation
- Multiple Devices Support
- Battery Life: 40 hours
FAQ
- Q: How do I reset my Wave headphones?
- A: Press and hold the volume buttons to reset your Wave headphones.
- Q: How long does the battery last?
- A: The battery of the Wave headphones lasts for approximately 40 hours.
Features
HEY YOU!
The new ANC headphones from Soundliving are superb for a good all-round headset that handles all the tasks of the day. They are obvious to bring when you transport yourself in noisy environments such as trains, planes or other, where you can easily activate the ANC function and all the noise will be shut out. Enjoy it!
SOUND LIVING WAVE
Thank you for choosing Soundliving Wave. Please read this manual to optimize your experience with the product. Enjoy your new Waves!
TECHNICAL SPECIFICATIONS
- Bluetooth version: 5.0
- Frequency: Frequency 20- 20 KHzs
- Control: Side buttons
- Dimensions: 68x191x81 (mm)
- Playback time: ≈ 40 hours
- Connection: AUX or Bluetooth
- Noise reduction: Active Noise Cancellation
- Charging: Type USB-C
- Weight: ≈ 209 g
THE CONTENT OF THE PACKAGE
AUTOMATIC PAIRING
- Connect your Wave with your smartphone by pressing and holding the POWER button for 4 seconds and you will hear “Pairing” from the headphones.
- Your Wave will appear in the list of devices in your bluetooth settings.
CHARGING
- Charge your Wave with the included USB-C charging cable and top it up via an adapter or PC.
- A red LED diode will light up when your Wave is charging, and turn off when it is fully charged.
RESET YOUR WAVE
- Charge your Wave with the included USB-C charging cable and top it up via an adapter or PC.
- A red LED diode will light up when your Wave is charging, and turn off when it is fully charged.
- Reset your wave with the volume buttons
- Press and hold both volume buttons (+ and –) for 5 seconds.
- You will hear a small beep and the diode will alternately flash red and blue – your wave has now been reset.
MULTI-POINT CONNECTION
- Press and hold the Power button for 4 seconds and listen until you hear “Pairing”, to enter Bluetooth pairing mode. The diode will alternately flash red and blue.
- Connect with your first device, (e.g. smartphone).
- Next, switch off your wave by pressing and holding the Power button for 5 seconds.
- Turn on your wave again by pressing and holding the Power button for 4 seconds, listen for “Pairing” – the diode will alternately flash red and blue.
- Go to your Bluetooth settings on your other device (e.g. a computer). Your wave will appear in the list of bluetooth devices “Soundliving-SL35”, select your wave and connect.
- Reconnect to the first device, then both devices will be connected to your wave.
THE FUNCTIONS OF THE BUTTONS
- Turn on the headphones: by pressing and holding the Power button for 2 seconds.
- Turn off the headphones: by pressing and holding the Power button for 5 seconds.
- *NB : Also turn off the ANC function to avoid the discharge
- Play/Pause music: by pressing the Power button once.
- Redial last call: by pressing the Power button twice.
- Answer incoming calls: by pressing the Power button once.
- Hang up/reject calls: by pressing and holding the Power button for 2 seconds.
- Switch between two calls: by pressing the Power button three times.
- Use Siri/Google Assistant: by pressing and holding the Power button for 2 seconds.
- Turn ANC (Active Noise Cancelling) on/off: by sliding the switch up and down.
- Control volume: by pressing + and –.
- Switch to the next song: by pressing and holding the + button for 2 seconds.
- Switch to the previous song: by pressing and holding the – button for 2 seconds.
Precautions
WARNING
- Do not wash the headphones when the USB cover is open or loose
- Do not use alcohol, thinner, detergent, shampoo or other solvents for cleaning purposes.
- Do not intentionally submerge under water.
- Do not wash the headphones in the washing machine.
- Do not expose your headphones to extremely high or low temperatures.
- To avoid electric shock, do not disassemble your speaker in any way.
- Do not throw your headphones into a fire. The battery can explode and cause personal injury or death.
- Only charge the battery in accordance with the company’s instructions.
- The headphones are not completely waterproof where the sound is emitted, the sound can be muffled if water gets in.
- When this happens, hold the earphones and clap 10-20 times to remove the water. Place a dry cloth under the speaker for 2-3 hours.
Note
- It is recommended to dry the device for 24 hours in a dry environment before charging after exposure to water.
Warning
- The risk of explosion increases if the battery is replaced with an incorrect type.
- Dispose of used batteries according to instructions.
Instructions
- Do not dispose of used batteries with household waste.
- Battery disposal must comply with local environmental regulations.
Contact
- www.soundliving.dk
- +45 7199 3479
- [email protected]
- Unionsvej 11, 4600 Køge
References
Read User Manual Online (PDF format)
Loading......