KAI-ROAD White Dresser for Bedroom Installation Guide
- May 15, 2024
- KAI-ROAD
Table of Contents
KAI-ROAD White Dresser for Bedroom
Product Information
Specifications:
- Parts Included: PART #2, PART #3, PART #4, PART #5, and more as specified
- Hardware: M6 x 12mm screws, M6 x 25mm lock plate screws, M4 x 10mm screws
- Assembly Steps: 11 steps detailed in the manual
Product Usage Instructions
-
Step 1: Pre-Assembly Preparation
Ensure all parts are correctly identified and laid out. Do not tighten any screws until all are in their correct positions. -
Step 2: Parts Alignment
Check and verify the correct placement of PART #2, PART #3, PART #4, PART #5, and other components before assembly. -
Step 3: Hardware Installation
Use the specified screws (M6 x 12mm, M6 x 25mm, M4 x 10mm) to secure the parts together as per the instructions provided. -
Step 4: Assembly Completion
Follow the step-by-step instructions provided in the manual to complete the assembly process.
Frequently Asked Questions (FAQ)
- Q: What should I do if I encounter difficulties during assembly?
A: If you face any challenges or have further questions, please contact our Customer Center for assistance via email.
PARTS LIST
Attention: Do not tighten the screws until all of them are in right positions.
INSTALLATION
REMARK
- PART #2, PART #3, PART #4, PART #5 have little difference between each other, please check it and make sure they are in right place before you assemble.
- If you have any further questions, please feel free to contact us Customer Center by email.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>