XPOtool 64156 Hose Reel Reeling Up Mechanism 20m Garden Hose User Manual

XPOtool 64156 Hose Reel Reeling Up Mechanism 20m Garden Hose

Product Information

Specifications

Product Usage Instructions

Choosing the Best Installation Site
This product can be mounted in various ways. When selecting the mounting location, consider the following:

• Ensure the surface can bear the weight of the reel and hoses.
• Follow the installation instructions provided in the manual.
• Refer to illustrations for guidance on installation.

Fixing the Reel Directly to Wood

Recommended Tools:
Bolt finder, wall drill, screws, washers

Steps:

1. Locate the bolt and mark the drilling point.
2. Attach the drilling template to the wall at the correct height.
3. Ensure holes are centered on the bolt and vertical.
4. Drill four holes with a 3-mm wall drill.
5. Secure the holder to the wall using screws and washers.
6. Mount the hose reel on the holder and secure it with the fixing bolt.
7. Connect the inlet hose to the water supply.

Fixing the Reel to a Cavity Wall or Brickwork Structure

Recommended Tools: [Tool names] [Steps for fixing to a cavity wall or brickwork structure]

Frequently Asked Questions (FAQ)

• Q: Can I use a longer outlet hose with this hose reel?
  A: The recommended length for the outlet hose is 20 meters. Using a longer hose may affect performance.

• Q: What is the maximum pressure this hose reel can handle?
  A: The maximum operational pressure for this hose reel is 8 bar.

• Q: Do I need professional help for installation?
  A: If you are unsure about the installation process or encounter difficulties, it is recommended to seek assistance from a professional plumber.

Read and follow the operating instructions and safety information before using it for the first time.

Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual or in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you.

• Send us an e-mail to: service@wiltec.info or use our contact form: https://www.wiltec.de/contacts/
• The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch.

Our postal address is:
WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler – Germany

To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.

Retourenabteilung

• WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler – Germany
• E-mail: service@wiltec.info
• Tel: +49 2403 55592–0
• Fax: +49 2403 55592–15

Introduction

Thank you for choosing to purchase this quality product. To minimize the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.

Safety instructions

• Read the entire user’s manual before you install and use the product.
• Only connect the reel to a source of water with a pressure of 8 bar or less.
• Discharge the water pressure when the hose reel is not in use.
• The housing must not be disassembled. There is a tensioned spring inside.
• When incorrectly mounting the article, it might fall. Make sure that the surface that the reel is fixed to can support the load.
• When using electric tools, e.g., an electric drill, always wear eye protection.
• Make sure that there are no electric cables or tubes inside the wall where you wish to install the hose reel.
• Hold the hose until it has been entirely retracted into the reel.
• The yellow marks of adhesive tape show the end of the length of the hose.
• Attention! Do not lose your hold of the hose to allow it to reel up independently.

Scope Of Delivery

Technical Specifications

Choosing the best installation site

This product can be mounted in many ways. It is important to choose the mounting spot carefully. Consider the following points when mounting the reel to a certain surface:

1. proximity of the source of water – This product has a 20-m outlet hose. Make sure that it reaches your garden.
2. proximity of the water supply – This product has a 2-m inlet hose. Make sure that it reaches the supply.
3. Sunlight – installation site covered from direct sunlight
4. Thickness of the installation site – The surface must be strong enough to support the loads stated in the illustrations (per screw). If you are not sure, contact a professional plumber.
5. Find additional information on the installation options in the manual.
   • Warning! There is a risk of falling if the installation is not carried out correctly. Make sure that your installation can bear the above-mentioned loads.
   • Caution! Wear eye protection when using power tools, such as an electric drill.
   • Warning! Make sure that there are no live cables or pipes in the wall where you are drilling.

Fixing the reel directly to the wood

Recommended tools

• Masking tape
• Bolt finder
• Level
• Electric drill machine
• ⌀3-mm drill
• Cross-head screwdriver

Steps

1. Find the bolt with the help of the bolt finder and mark the point.
2. Fix the drilling template to the wall at an appropriate height, making sure that the holes are centered on the bolt.
3. Check the midpoints of the holes using a level to make sure that they are vertical.
4. Drill four holes in the middle of the template with a 3-mm wall drill.
5. Fix the holder to the wall or wood needle using four screws and washers.
6. Set the hose reel to the wall holder and secure it by inserting the fixing bolt.
7. Connect the end of the inlet hose with the water supply.

Fixing the reel to a cavity wall or brickwork structure

Recommended tools

• Masking tape
• Level
• Electric drill machine
• ⌀10-mm drill
• Hammer or mallet
• Cross-head screwdriver

Steps

1. Fix the drilling template to the wall at an appropriate height, making sure that the holes are between the bolts.
2. Check the midpoints of the holes using a level to make sure that they are vertical.
3. Drill four holes in the middle of the template with a 10-mm wall drill.
4. Drive plastic dowels (B3) in the holes using a hammer or mallet.
5. Fasten the bracket to the wall or wooden post using four screws and a washer, making sure that the fastening screws are driven into the plastic anchors in the wall.
6. Set the hose reel to the wall holder and secure it by inserting the fixing bolt.
7. Connect the end of the inlet hose with the water supply.

Use

Warning!

• Always hold the hose firmly until it is fully retracted into the hose reel.
• The yellow tape marks the end of the hose length.
• Depressurise when not in use.
• Do not let go of the hose so that it retracts automatically.

1. Extract the hose to the desired length. The hose will latch automatically.
2. For unlatching and rolling up, shortly pull the hose. Guide the hose back to its reel. When pulling out the hose more than 10 cm, the hose locks in place again.
3. Always hold the hose while rolling it up to avoid injuries and damage.
4. In case the hose gets tangled up, preventing its rolling up, extract it again over the tangled point, then let it retract slowly while guiding the hose back to its reel. Always make sure that the hose is clean and does not get tangled.

Adjusting the stop-all
The position of the stop ball can be adjusted so that the hose is always within reach. No tools are required to realize this adjustment.

Steps

1. Extract the hose to the desired length, making sure that the hose reel is locked (the hose does not roll up again).
2. Open the lock of the stop ball and slide it to the desired position.
3. Re-lock the ball.

Attention!
Always make sure that the hose reel is locked before removing the stop ball; also make sure that the stop ball is securely fixed before unlocking the reel.

Maintenance

Although this product has been made of high-quality material, wear and tear might appear over time. Check the hose and housing regularly. When cracks or bubbles can be seen, place the reel out of operation.

Attention!
There is a tensioned spring inside. Do not disassemble the housing.

• Always keep the hose clean.
• When the hose is dirty, clean it with a damp cloth while reeling the hose up.
• Do not twist the hose during its use.
• Install the hose reel to a protected site to keep and protect the performance of the hose and reel.
• The hose must not come into contact with caustic chemicals or liquids.
• Always reel the hose up when it is not in use.

Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires the written permission of WilTec Wildanger Technik GmbH.

https://www.XPOtool.com.

References

• WilTec - Ihr Online Shop für Haus, Garten, Werkstatt, Freizeit

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>