Honeywell EVS-CE4 Audio Circuit Expander User Manual
- May 15, 2024
- Honeywell
Table of Contents
EVS-CE4
Audio Circuit Expander
Product Installation Document
Description
The EVS-CE4 is an Audio Circuit Expander that adds four audio circuits to the EVS-50W or EVS-125W. The EVS-CE4 mounts inside the EVS-50W or EVS-125W cabinet.
NOTE: Installation and wiring of this device must be done in accordance with NFPA 72 and local ordinances.
Compatibility
The EVS is compatible with the following Silent Knight Series FACPs:
- 6820EVS
- 5820XL-EVS
NOTE: For more information, refer to the FACP Installation Manual or EVSSeries Manual (PN LS10062-001SK-E).
Specifications
- Standby Current: 20mA
- Alarm Current: 180mA
Installation
- Remove AC power from the EVS-50W or EVS-125W Amplifier and disconnect the backup batteries.
- Mount the EVS-CE4 in the EVS-50W or EVS-125W cabinet using the four supplied screws.
Wiring
-
Connect the supplied audio expander cable harness (PN 130426) from the connector labeled Audio Expander on the EVS-50W or EVS-125W to the connector on the EVS-CE4.
-
Connect the wire speakers for Class B supervision or for Class A as shown in Figure 2.
-
Restore AC power and reconnect backup batteries.
Honeywell Silent Knight
12 Clintonville Road
Northford, CT 06472-1610
203.484.7161
www.silentknight.com
LS10070-001SK-E | B2 | 12/21
©2021 Honeywell International Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>