Hishine B084KHP17K Hoverboard Seat Attachment Instruction Manual
- May 15, 2024
- Hishine
Table of Contents
Hishine B084KHP17K Hoverboard Seat Attachment
The specification of Hoverboard Seat Attachment
Warning: In order to avoid injury caused by incorrect use, please read the instruction manual carefully before using this product, and use the product strictly in accordance with the instruction manual.
Product Description
This hoverboard attachment is designed for children & adults over eight years old. It can be used for play time or leisure travel. This accessory is compatible with most popular 6.5″, 8″ & 10″ tires. All components are sturdy and safe. Instead of standing on the hoverboard, kids can seat steadily, manually control the direction and adjust speed, avoid the risk of falls. Hand-operation gives kids full control of their riding experience, bringing them tons of fun and happiness. For better riding experience, please read this instruction carefully.
Hishine Kart Diagram
- Seat
- Seat Frame
- Front Frame
- Handle Bars
- Pedal Mounts
- Front Wheel
- Twist Knob
- Straps
SPECIFICATIONS
- Compatibility: Most hoverboard
- Max Load: 2401bs
- Tire Size: 4″ swivel caster
- Seat Material: pp
- Weight: 6.01 kgs
PARTS LIST
Installation Instructions
- STEP 1: Insert the pedal mounts into the seat frame, adjust the length according to your needs, and fix the screw with the wrench
- STEP 2: Find the two handle bars and fix them to the pedal mounts with screws and nuts.
- STEP 3: Assemble the seat into the seat frame and fix it with screws and nuts.
- STEP 4: Insert front frame into the seat frame,adjust the frame to your desired length, secure in place by using the twist knob as shown below.
- STEP 5: Put the rubber protectors on the bottom of both sides of the pedal mounts.
- STEP 6: Adjust the length according to your needs and fix the screw with the wrench.
- Hoverboard must be calibrated and turned OFF prior to installing buggy.
- Please follow the manufacturer’s instructions for calibrating your hoverboard, as they may vary by brand and model.
- STEP 7: Insert the velcro straps into pedal mounts and wrap them under your self-balancing scooter, ensure it is fixed in place on the self-balancing scooter.
Operation Instructions
In order to have a better riding experience, please read the instructions carefully.
- Please put your go kart on the open space and make sure it is stable and flat.
- Please ensure you are comfortable to sit, then put your feet on the foot rests.
- When everything is ready, hold the handle bars firmly with both hands and slowly press it down. At this time, your kart will start to move slowly.
- If you want to stop during riding, please slowly pull both handlebars up at the same time.
- If you want to turn, pull the two handlebars slowly to adjust the direction.
- If you want to turn right, push the right handle bar down, while keeping the left handle bar in neutral position, then you can complete the right turn.
- On the contrary, if you want to turn left, push the left handle bar down while keeping the right handle bar in neutral position.
Attention
Please wear a safety helmet and ensure your forehead is completely protected before riding. Please carefully check whether there are any damaged parts before use every time. If there is any damage, please replace the damaged parts as soon as possible. Using damaged parts may cause accidents. Do not ride on roads and do not cross railway tracks directly. To avoid rolling over, please do not ride on soft, sandy or uneven surfaces. Do not ride near swimming pools or other places near water. Do not drive in the crowd to avoid losing control of the kart. Awareness of safe is good for you, please keep an eye on your surroundings and enjoy the riding.
Contact
- Address: 210 North Jackson st Waxahachie,TX 75165
- E-mail: info@hishineus.com
- Official Website: www.hishineus.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>