COSTWAY AC10003 Childcare Deluxe Change Table Instruction Manual

May 15, 2024
COSTWAY

COSTWAY AC10003 Childcare Deluxe Change Table

Product Information

Specifications

  • Model: AC10003
  • Age Range: 0-12 months
  • Maximum Weight Capacity: 11kg (24 lbs)

Product Usage Instructions

Before You Start

Please read all instructions carefully and keep them for future reference.

General Warnings

Before assembly, ensure that the changing table is placed on a flat surface. Do not leave your child unattended and prevent older children from climbing or playing on the change table.

Assembly Instructions

  1. SUPPORT LEG ASSEMBLY:
  2. Lay the changing table on a flat surface.
  3. Align and insert support legs into corresponding positions of the top assembly.
  4. Press in the pop-up pins while pushing the support legs into the frame completely.
  5. BOTTOM SHELF ASSEMBLY:
  6. Open and stand the frame.
  7. Secure all four corners of the support legs with the supplied screws.
  8. UNFOLD CHANGING TABLE:
  9. Place the safety locks down on both sides of the frame.
  10. Lift the frame safety locks by releasing the secondary lock first and then lifting up both locks on both sides to fold the product.
  11. Close the frame after use.

Caring for Your Childcare Change Table

If you encounter any difficulties during assembly, please contact us at the provided office locations.

FAQ

  • Q: What should I do if any parts are missing from the box?
    • A: If anything is missing from the box, please contact us at the respective office locations provided in the user manual.
  • Q: How do I store the changing table?
    • A: To store the changing table, pull forward the safety locks on the accessory tray and lift upwards. Ensure all components are secured properly for safe storage.

Before You Start

Please read all instructions carefully and keep it for future reference

General Warnings

  • Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
  • The product must be installed and used under the supervision of an adult.
  • Read through each step carefully and follow the proper order.
  • Remove all packaging, separate and count all parts and hardware before installation.
  • Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
  • We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
  • Ensure a secure surface during installation, and place the product always on a flat, steady and stable surface.

IMPORTANT

Retain for future reference, read carefully

WARNING!

TO AVOID INJURY OR DEATH, DO NOT LEAVE YOUR CHILD UNATTENDED. DO NOT ALLOW OLDER CHILDREN TO CLIMB OR PLAY ON THE CHANGE TABLE.

  • The maximum age of the child using this change centre is
  • 12 months or a maximum weight of 11 kg (24 lbs). Keep the change centre away from stoves, heaters, open fires and other hazards.
  • Do not use accessories other than those supplied and approved by the manufacturer.
  • Promptly replace worn or broken parts. Keep the changing table away from stoves, heaters, campfires and other hazards. Do not use this changer if any part is broken, tom or missing. This product is not intended for commercial use.
  • CONGRATULATIONS on your purchase of the childcare deluxe change table.
  • This product has been designed and developed with safety, comfort and functionality in mind.
  • Please take the time to read this manual carefully before using this product and keep it in safe place for future reference

Due to variations in style and design of our products, the photographs and illustrations shown in this user manual are generic, therefore the actual product fabrics, colour and design may vary from images shown

ASSEMBLY CONTENTS

CHECK WHAT YOU HAVE RECEIVED.

You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact us.

ASSEMBLY / OPERATING INSTRUCTIONS

SUPPORT LEG ASSEMBLY

  1. Lay the changing table on a flat surface.
  2. Align and insert support legs into the corresponding positions of the top assembly.
  3. While pressing in the pop-up pins, push the support legs into the frame completely until the pop-up pins are engaged

BOTTOM SHELF ASSEMBLY

  1. Open and stand the frame.
  2. Secure all four corners of the support legs with screws supplied.

Please note that there are long and short connecting rods, if you find that you cannot assemble them, please try to exchange the rods and assemble again.

UNFOLD CHANGING TABLE

  1. Place the safety locks down on both sides of the frame
  2. Make sure that the accessory tray holder frame is locked correctly by pulling upwards to ensure it does not lift.

STORING YOUR CHANGING TABLE

  1. Pull safety locks forward on accessory tray and lift upwards.

  2. Lift the frame safety locks
    There are safety locks on both sides of the product, release the secondary lock first, then lift up the both locks on both sides to fold the product

  3. Close the frame

HOW TO CARE FOR YOUR CHILDCARE CHANGE TABLE

CLEANING

To ensure the long-lasting use of your change table, dry it with a soft absorbent cloth after use. Use a damp cloth to clean the frame. Do not use abrasive cleaners. Allow it to dry thoroughly. Removable and non-removable fabric covers and trims may be cleaned using a damp cloth with soap or mild detergent. Allow it dry completely before folding or storing it away. Do not dry clean, or use bleach on fabrics or trims. Do not machine wash, tumble or spin dry, unless the care labeling on the product permits these methods.

MAINTENANCE

Check the change table regularly to ensure that locking devices and components are secure and working properly. Always check parts regularly for tightness of screws, nuts and other fasteners. Tighten or replace if required. To maintain the safety of your change table, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and accessories approved by the manufacturer. To prevent mould or mildew, do not fold orstore the product if it is damp or wet, Allow it to dry thoroughly. Always store the product in a well ventilated area and away from direct sunlight. If you have any difficulties in assembling the change table, please contact us.

  • US Office: Fontana, California
  • UK Office: Ipswich

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals