BRUNDLE 05SBS Rubber Gate Bump Stop Instructions
- May 15, 2024
- BRUNDLE
Table of Contents
BRUNDLE 05SBS Rubber Gate Bump Stop
Product Details
- Product code: 05SBS
- Description: 18mm diameter x 7mm buffer Thread size M6 x 16
Specifications
- Dimensions : 18mm diameter x 7mm buffer
- Thread Size : M6 x 16
- Material : Not specified
Product Usage Instructions
Installation
- Drill a 7mm hole in your gate stop.
- Insert the bump stop into the hole.
- Secure it using the M6 nut provided.
Note: Ensure installation is carried out in full compliance with current regulations.
Disclaimer
Whilst every effort has been made to ensure the accuracy of the information
supplied, F.H. Bundle cannot be held responsible for any errors or omissions.
This product must only be employed for its original intended use.
Contact Information
- Tel: 01708 25 35 45
- Email: [email protected]
- Website: www.fhbrundle.co.uk
- Date of Manual: Mar 2023
FAQ
- Q: Can the bump stop be used for other applications?
A: No, this product must only be used for its original intended purpose as a gate bump stop. Any other use can be potentially dangerous.
GATE BUMP STOP
- Prevent gates slamming shut by installing this gate bump stop
- Made of rubber to reduce the noise made when a gate closes
- Simply screw into the gate stop
PRODUCT DETAILS
- Product code:
- 05SBS
- Description:
- 18mm diameter x 7mm buffer Thread size M6 x 16
INSTALLATION
Drill a 7mm hole in your gate stop and insert the bump stop, securing using the M6 nut provided.
Whilst every effort has been made to ensure the accuracy of the information supplied. F.H. Bundle cannot be held responsible for any errors or omissions. This product must only be employed for its original intended use. Any other use is wrong and potentially dangerous. Installation must be carried out in full compliance with current regulations. F.H. Bundle cannot be held liable for any damages resulting from wrongful, erroneous or negligent use.
- Tel. 01708 25 35 45
- [email protected]
- www.fhbrundle.co.uk