QUYUEFA 4G GPS tracking Bracelet User Manual
- June 4, 2024
- QUYUEFA
Table of Contents
QUYUEFA 4G GPS tracking Bracelet User Manual
Tracking App installation
Use the guardian’s mobile phone to scan below QR code and install the tracking
App.
SIM card installation and power on device
Open the side SIM slot with a screw driver in accessories. Make sure the
bracelet is in off status. Insert the SIM card based on the direction as
left picture shows till it is locked. Long press the SOS key till the bracelet
vibrates with ringtone and indicators on.
App login
Login the App via device 10 digits ID number on back label and default
password 123456 from the access of “Device ID” as screenshot shows.
Real time tracking
App main page showing Stationary or Moving both means bracelet is online. Only
when it is online can user do settings in App. Click Real time tracking icon
to check the latest bracelet location. Click the upper right corner icon to
set location uploading intervals. Usually, we suggest to set with “12 hours
battery saving mode” to make sure bracelet has power for urgent SOS help.
Bracelet settings
When App page shows bracelet online. Click “Settings” Icon and set SOS numbers, then the bracelets basic calling and SOS help functions work.
Set SOS numbers:
3 SOS numbers for SOS call receiving.
Set phonebook
- First two numbers are for bracelet key 1 & 2.
- Whitelist: Only numbers in phone book can get through the calls to the bracelet.
Voice message
- Press the bracelet microphone key and speak. Release the key to send out a voice message.
- Find “Voice talk” in App, click in and listen to the voice messages sent from the bracelet.
Health monitor
-
Click icon of Health and enter the health management page.
-
Click Heart rate and blood pressure and enter measuring page. Click the top up right corner button as picture shows here and Heart rate check to detect wear’s data. The bracelet will upload heart rate and blood pressure data in 3 to 5 minutes.
-
Pill alarm: Set three different modes according to user’s needs.
-
Body temperature measurement: Set three body temperature measuring modes accordingly
Other functions
-
Historical route: Display the historical route of any day in recent 90 days. You can choose whether to show LBS location data. (Note: LBS is based on the cell signal tower, whose accuracy is not good.)
-
Geo-fence: After setting a Geo-fence. when the device gets into or out of the GPS-fence. The App will get an alert. (Note: we suggest the radius of GPS-fence over 300 meters to reduce false alerts.)
-
WIFI-fence: You can set 2 WIFI safe zones, when device leaves safe WIFI zones, the App will give notification.
-
Settings: Other functional settings
-
About the device: Please make sure to fill in the contact number for App password find in later use.
Filter LBS and WIFI: As these two tracking ways’ accuracies are poorer, user can choose to filter either of them in daily use. If the bracelet wearer stays indoors, it is not recommended to choose either option, in case the location stops updating. Click Save icon after information edit. -
Take-off device alert: After turning on it, the bracelet will send alerts when it is taken off from wear’s wrist. (Note: This function runs battery extra, it will affect battery standby time.)
-
Scene mode: Set the alarm ways of the bracelet’s coming call, including ringtone, vibration, and both, etc.
-
Clock alarm: Set three different alarm modes accordingly.
-
Find watch/device: After the command sent, the watch will give out ringtone to guide the guardian to find out the bracelet or the wearer fast.
-
Device Language and time zone: Set watch SMS alerts’ language and time zone. Options are Chinese and English. Default is +8.
-
Remote reboot: To reboot the bracelet from this setting.
-
Remote power-off: To power-off the bracelet remotely. (The bracelet can be only turned on by manually after this setting. Please use with caution)
-
Restore factory settings: To default the device back to the status of factory settings.
-
Alarm list: To check all alarms the bracelet generated. Long press to delete a single alarm.
-
-
FAQ: To find the solutions for simple issues.
Main features:
- 4G LTE + 2G GSM
- GPS + Beidou + WIFI +LBS position ways
- Heart rate, blood pressure and temperature detection
- Pill reminder, step counting and health management
- Waterproof level: IPX7
- Web platform/ Mobile App for location check
- SOS button for help/ Fall alarm/ Take-off alarm
- One clicks for a fast call
- Talking clock
- Low battery alarm
- Ringtone to find the bracelet
Accessories:
- 1* GPS bracelet
- 1* Screw driver
- 2* Spare screws
- 1* USB charging cable
- 1* User manual
- 1* Sim Card Ejector Pin
Product Specifications:
Version A：
FDD： Band 1/3/5/7/8/20
TDD： Band 38/39/40/41
GSM： Band 2/3/5/8
Version B：
FDD： Band 2/4/5/7/12/28A
GSM： Band 2/3/5/8
GPS locating time： 30sec with cold boot (open sky) 29sec with warm boot
(open sky) 5sec with hot boot (open sky)
GPS accuracy： 5-15m (Open sky) WIFI accuracy：15-100m（Under WIFI signal
coverage）
Working temperature：- 20℃ ~ +70℃
Working humidity： 5% ~ 95% RH Host size：654220mm
Device net weight： 73g
Battery capacity： 1000mA
Appendix 1：
Indicator instructions
| Color | Status | Meaning | |
|---|---|---|---|
| Power on | Red （Network） | Slow flash | Signal searching |
| Fast flash | Signal received | ||
| Blue （GPS） | Slow flash | Positioning | |
| Fast flash | Position uploaded | ||
| Charging | Red indicator | Slow flash | In charging |
| Always on | Fully charged | ||
| Blue indicator | Slow flash | In charging | |
| Slow flash | Fully charged |
Low battery: the red indicator slow flash only
Appendix 2:
Important! Please read below statements:
- Due to external factors all GPS devices have position error, so the position provided by this device just for reference.
- There may be delays caused by telecom operators at certain circumstance. Our company doesn’t assume to take responsibility of loss causes by this delay.
Q： After SIM card installed, App shows “Not enabled”.
Check whether the SIM card in bracelet activate GPRS data plan. Make sure the
bracelet is powered off when installing a SIM card. Configure APN of the SIM
card via tips in FAQ.
Q： It says “Current device is offline” when save phone numbers in App.
Make sure the bracelet has inserted a SIM card and the bracelet indicators
flash in a normal working way.
Q： The bracelet says it is busy now when call it.
Make sure your number has been set in advance. (To ensure the safety of
wearer, only numbers saved via APP settings as SOS numbers can call the
bracelet.)
Make sure SIM card’s Caller ID display has been activated.
Q: In audio calls, sometimes I got noise, echoor even screech.
When calling phone is near the GPS bracelet, speaker gets cell phone signal
disturbing, which causes noise or even screech.
Q: Sometimes, WIFI fence has no alarm？
The WIFI in this bracelet doesn’t support 5GWIFI.Android phones shall choose
2.4GWIFI as the hotspot of WIFI fence.
iPhones use the phone connecting WIFI as the fence hotspot automatically. If
your iPhone is connectinga5GWIFI, please don’t set WIFI fence to avoid the
situation of no WIFI fence alarms.