scheppach SBP4.0 Batterie Charger Instruction Manual

scheppach SBP4.0 Batterie Charger

Specifications

• Product: Akku SBP4.0
• Manufacturer: Scheppach GmbH
• Battery Type: Lithium-Ion
• Number of Battery Cells: 10
• Rated Voltage: max. 20 V

Explanation of the symbols on the product

Introduction

Manufacturer:

• Scheppach GmbH
• Günzburger Straße 69
• D-89335 Ichenhausen

We hope your new product brings you much enjoyment and success. The operating manual is part of this product. It contains important notices for safety, use, and disposal. Familiarise yourself with all operating and safety instructions before using the product. Only use the product as described and for the specified areas of application. If the device is passed on to a third party then pass all of the documentation on with it.

Note: By the applicable product liability laws, the manufacturers of this product assume no liability for damage to the product or caused by the product arising from:

• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorized specialists
• Installing and replacing non-original spare parts
• Improper use

Description of the product

1. Release button
2. Button for battery charge status indicator
3. Charge status indicator
4. Battery

Scope of delivery

WARNING: The product and the packaging material are not children’s toys! Do not let children play with plastic bags, films or small parts! There is a danger of choking or suffocating!

• Item: 4.
• Quantity:
  • 4. 1 x
  • 1 x
• Designation:
  • Battery
  • Operating manual

Proper use

• The battery is part of the Scheppach 20V IXES series and can be used with products of the Scheppach 20V IXES series. The battery may only be charged with chargers of the Scheppach 20V IXES series.
• The product may only be used in the intended manner. Any use beyond this is improper. The user/operator, not the manufacturer, is responsible for damages or injuries of any type resulting from this.
• An element of the intended use is also the observance of the safety instructions, as well as the assembly instructions and operating information in the operating manual.
• Persons who operate and maintain the product must be familiar with the manual and must be informed about potential dangers.
• The liability of the manufacturer and resulting damages are excluded in the event of modifications of the product.
• The product may only be operated with original parts and original accessories from the manufacturer.

The safety, operating, and maintenance specifications of the manufacturer, as well as the dimensions specified in the technical data, must be observed.
Please note that our products were not designed with the intention of use for commercial or industrial purposes. We assume no guarantee if the product is used in commercial or industrial applications, or for equivalent work.

Safety instructions

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Using and handling the rechargeable tool

• a) O nly charge the batteries with battery chargers recommended by the manufacturer. A battery charger that is suitable for a particular type of battery poses a fire hazard when used with other batteries.
• b) Only use the batteries in power tools that are designed for them. The use of other batteries can lead to injuries and a risk of fire.
• c) Keep the unused battery away from paper clips, coins, keys, nails, screws or other small metal objects that could cause a short circuit between the contacts. A short circuit between the contacts of the battery could result in burns or fires.
• d) Liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of accidental contact, rinse with water. If the liquid gets into your eyes, seek additional medical attention. Leaking battery fluid may cause skin irritation or burns.
• e) Do not use a damaged or modified battery. Damaged or modified batteries can behave unpredictably and cause fire, explosion, or injury.
• f) Do not expose a battery to fire or excessive temperatures. Fire or temperatures above 130°C may cause an explosion.
• g) Follow all charging instructions and never charge the battery or rechargeable tool outside the temperature range specified in the operating manual. Incorrect charging or charging outside the approved temperature range can destroy the battery and in-crease the risk of fire.

Service: Never attempt to service damaged batteries. Any type of battery maintenance shall be carried out only by the manufacturer or an authorized customer service center.

Special safety instructions for battery-powered devices

ATTENTION: Observe the safety instructions and notes in the operating instruc-tions of all compatible products you use.

• Make sure the device is switched off before inserting the battery. Inserting a battery into an electric tool that is switched on can cause accidents.
• Only charge your batteries indoors because the battery charger is only intended for this purpose. Danger due to electric shock.
• To reduce the risk of electric shock, unplug the battery charger from the wall socket before cleaning.
• Do not expose the battery to strong sunlight for a long time and do not place it on radiators. Heat damages the battery and there is a risk of explosion.
• Allow a heated battery to cool down before charging.
• Do not open the battery and avoid mechanical damage to the rechargeable battery. There is a risk of short-circuiting and vapors may escape that irritate the respiratory tract. Make sure you get fresh air and seek additional medical help.
• Do not use accessories that are not recommended by the manufacturer. This can lead to electric shock or fire.

Technical data

Subject to technical changes!

Operation

Inserting/removing the battery

CAUTION

• The danger of injury!
• Do not insert the battery until the battery-powered tool is ready for use.

Inserting the battery

1. Push the battery (4) into the battery mount of the compatible power tool. The battery (4) clicks into place audibly.

Removing the battery

1. Press the battery (4) release button (1) and pull the battery (4) out of the battery mount of the compatible power tool.

Check the charge status of the battery

• The charge status indicator (3) indicates the charge status of the battery (4).
• The charge status of the battery is indicated by the corresponding LED light lighting up.

1. Press the charge status indicator button on the battery (2).
   LED on the battery| Charging status
   ---|---
   red-orange-green| Battery full
   red-orange| Battery partially charged
   red| Battery empty

Depleted batteries

• A significantly shortened operating time despite charging indicates that the battery has been used up and needs to be replaced. Only use original replacement batteries.
• In any case, observe the applicable safety instructions as well as regulations and instructions on environmental protection (see “Dis-posal and recycling”).

Cleaning

• Clean the product with a dry cloth or brush.
• Do not use water or metallic objects.

Maintenance

The product is maintenance-free.

Storage

1. Remove the battery from the product before prolonged storage (e.g. winter storage).
2. Clean and check the product for damage.
3. Store the battery in a partially charged state.
4. When stored, check the battery charge level every three months.
5. Recharge the battery if necessary.

Store the battery in a dark, dry, and frost-free place that is inaccessible to children.
The optimum storage temperature lies between 0 °C and 45 ˚C.
Store the product in its original packaging.

Ordering spare parts

Spare parts/accessories

Spare parts and accessories can be obtained from our Service Centre. To do this, scan the QR code on the front page.

Disposal and recycling

Notes for packaging

• The packaging materials are recyclable. Please dispose of packaging in an environmentally friendly manner.
• Waste electrical and electronic equipment does not belong in household waste, but must be collected and disposed of separately!
• Notes on lithium-ion batteries

Remove the battery before disposing of the device!

• Do not dispose of the battery in household waste, in a fire (risk of explosion), or in water. Damaged batteries can harm the environment and your health if toxic vapors or liquids escape.
• Defective or used batteries must be recycled under Directive 2006/66/EC.
• Hand in the device and the battery charger at a recycling center. The plastic and metal parts used can be separated by type and thus recycled.
• Dispose of batteries when discharged. We recommend covering the poles with an adhesive strip to protect against a short circuit. Do not open the battery.
• Dispose of batteries according to local regulations. Return batteries to a used battery collection point where they can be recycled in an environmentally friendly manner. Ask your local waste disposal company about this.

Warranty conditions – Scheppach 20V IXES series

Revision date 11/07/2023
Dear customer,
our products are subject to strict quality checks. However, if a product does not function perfectly, we deeply regret this and ask that you contact our customer service at the address specified below. We will also be glad to assist you by telephone via the service number. The following information is intended to help you to process and settle your claim without any problems.

For the assertion of warranty claims, the following applies:

1. The warranty conditions govern our additional manufacturer warranty services for purchasers (private end consumers) of new products. The statutory warranty claims are not affected by this warranty. This is the responsibility of the dealer who you purchased the product from.

2. The warranty service extends exclusively to defects in a new product purchased by you that are based on a material or manufacturing fault and is, at our discretion, limited to the repair of such defects free of charge or the replacement of the product (also replacement with a successor model, if necessary). Replaced products or parts shall become our property. Please note that our products were not designed for commercial, trade, or professional use. A warranty claim is therefore not valid if the product has been used in commercial, trade, or industrial operations within the warranty period or has been subjected to equivalent stress.

3. The following are excluded from our warranty services:

   • Damage to the product which was caused by non-observance of the assembly instructions, improper installation, non-obser-vance of the operating instructions (e.g. connection to an incorrect mains voltage or type of current) or the maintenance and safety regulations or use of the product in unsuitable environmental conditions as well as by insufficient care and maintenance.
   • Damage to the product caused by misuse or improper application (such as overloading the product or using non-approved tools and accessories), penetration of foreign bodies into the product (such as sand, stones or dust), transport damage, use of force or external influences (such as damage caused if dropped).
   • Damage to the product or parts of the product which is due to intentional, normal (operational) or other natural wear as well as damage and/or wearing of worn parts.
   • Defects in the product have been caused by the use of accessories, expansions, or spare parts that are not original or are not used as intended.
   • Products on which changes or modifications have been made.
   • Minor deviations from the target characteristics which are irrelevant to the value and usability of the product.
   • Products on which unauthorized repairs have been carried out, in particular by an unauthorized third party.
   • If the marking on the product or the identification information of the product (machine label) is missing or illegible.
   • Products that are very dirty and are therefore refused by the service personnel.
   • Claims for damages and consequential damages are generally excluded from this warranty.

4. The warranty period is usually 5 years (12 months for batteries/rechargeable batteries) and starts from the date of purchase of the product. The date on the original purchase receipt is decisive. Warranty claims must be made immediately after becoming aware of them. The assertion of warranty claims after the expiry of the warranty period is excluded. The repair or replacement of the product does not result in an extension of the warranty period, nor does this service initiate a new warranty period for the product or for any in-stalled spare parts. This also applies when using an on-site service. The product concerned is to be cleaned and returned to the service center together with a copy of the purchase receipt, which must include the date of purchase and the product designation. If a product is sent in incomplete without the complete scope of delivery, the missing accessories will be charged/deducted in value if the prod-uct is exchanged or in the event of a refund. Partially or completely dismantled products cannot be accepted as a warranty claim. In the event of an unjustified complaint or if outside the warranty period, the purchaser shall generally bear the transport costs and the transport risk. Please report a warranty claim in advance to the service center (see below). It is generally agreed upon that the defective product will be returned to the service address given below with a brief description of the fault by organized return or, in the case of repair outside the warranty period, with sufficient postage, taking the appropriate packaging and shipping guidelines into account. Please note that your product (depending on the model) will be free of all operating materials when returned for safety reasons. The product sent to our service center must be packaged in such a way that damage to the product under complaint is avoided during transport. After successful repair/replacement, we will send the product back to you free of charge. If products cannot be repaired or replaced, a sum up to the purchase price of the defective product may be refunded at our discretion, taking into account any deduction for wear and tear. These warranties are only for the benefit of the original private purchaser and cannot be assigned or transferred.

5. Extension of the warranty period to 10 years: Scheppach offers an additional warranty extension of 5 years on products of the Scheppach 20V series. Thus, the warranty period for these products totals 10 years. Batteries / rechargeable batteries, battery chargers, and accessories are excluded from this. You can claim this warranty extension by registering your Scheppach product from this range at https://garantie.scheppach.com no later than 30 days from the date of purchase. After registering online successfully, you will receive confirmation for the item-related warranty extension.

6. To submit your warranty claim, please contact our service center.
   Preferably, please use our form on our homepage: https://www.scheppach.com/de/service
   Please do not send us any products without first contacting and registering with our service center.
   Contacting our service center first is mandatory to claim these warranty promises. Warranty claims must be made before the expiry of the warranty period within 14 days of discovery of the defect. For this purpose, the original purchase receipt and, if necessary, confirmation of the item-related warranty extension are required.

7. Processing time – We normally process complaint consignments within 14 days of receipt at our service center. If, in exceptional cases, the processing time mentioned is exceeded, you will be informed in good time.

8. Wear parts are generally excluded from the warranty! – Wear parts are: a) supplied, attached, and/or installed batteries / rechargeable batteries as well as b) all model-dependent wear parts (i.e. belts, saw blades, tool attachments, grinding discs, filters, carbon brushes, etc., see operating manual). The warranty does not cover batteries or rechargeable batteries that are deeply discharged or those with damaged housing or battery terminals.

9. Cost estimate – Products that are not covered or no longer covered by the warranty will be repaired at extra cost. Upon request to our service center, you can send in the defective products for a cost estimate and, if necessary, give the service center approval for the repair in writing (by post, or e-mail). No further processing will take place without approval for the repair.

10. 10. Claims other than those mentioned above cannot be asserted.
    The warranty conditions only apply in the current version at the time of the complaint and, if necessary, can be found on our homepage (www.scheppach.com).
    In the case of translations, the German version is decisive.
    Scheppach GmbH · Günzburger Str. 69 · 89335 Ichenhausen (Ger-many)

Tel: +800 4002 4002 ·
E-Mail: customerservice.GB@scheppach.com
Internet: https://www.scheppach.com
We reserve the right to make changes to the warranty conditions at any time without prior notice.

14 EU Declaration of Conformity
Original Declaration of Conformity

Manufacturer:

• Scheppach GmbH
• Günzburger Straße 69
• D-89335 Ichenhausen
• We declare under our sole responsibility that the product described here complies with the applicable directives and standards.

Brand: SCHEPPACH
Item designation: BATTERY SBP4.0
Item No. 7909201709

EU directives:
2014/30/EU, 2011/65/EU

The object of the declaration described above fulfills the regulations of the directive 2011/65/EU of the European Parliament and Council from 8th June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Applied standards:

• EN 62841-1:2015/A11:2022 Annex K;
• IEC 62133-2:2017; IEC 62133-2:2017/AMD1:2021

Documentation authorised representative:

• Simon Schunk
• Günzburger Str. 69
• D-89335 Ichenhausen
• Ichenhausen, 18.09.2023

Simon Schunk
Division Manager Product Center

Andreas Pecher
Head of Project Management

www.scheppach.com

References

• ch.com
• pach.com
• scheppach | scheppach
• Kontakt & Service | scheppach | scheppach
• Scheppach Product Registration
• scheppach | scheppach
• Kontakt & Service | scheppach | scheppach

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>