scheppach 7909203702 Accumulator Battery Instruction Manual
- October 27, 2023
- Scheppach
Table of Contents
scheppach 7909203702 Accumulator Battery
Explanation of the symbols on the equipment
- Read the operating instructions to reduce the risk of inquiry!
- Protect the battery from water and moisture.
- protect the battery from heat and fire.
- Protect the battery from temperatures above 45 °C.
- Old devices must not be disposed of with household waste!
- Batteries and rechargeable batteries do not belong in household waste!
- The product complies with the applicable European directives and an evaluation method of conformity for these directives was done.
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and success.
NOTE:
According to the applicable product liability laws, the manufacturer of the
device does not assume liability for damages to the product or damages caused
by the product that occurs due to:
- Improper handling,
- Non-compliance of the operating instructions,
- Repairs by third parties, not by authorized service technicians,
- Installation and replacement of non-original spare parts,
- Application other than specified,
- A breakdown of the electrical system that occurs due to the non-compliance of the electric regulations and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating instructions before installing
and commissioning the device. The operating instructions are intended to help
the user to become familiar with the machine and take advantage of its
application possibilities in accordance with the recommendations. The
operating instructions contain important information on how to operate the
machine safely, professionally and economically, how to avoid danger, costly
repairs, reduce downtimes and how to increase reliability and service life of
the machine. In addition to the safety regulations in the operating
instructions, you have to meet the applicable regulations that apply for the
operation of the machine in your country. Keep the operating instructions
package with the machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction manual each time
before operating the machine and carefully follow its information. The machine
can only be operated by persons who were instructed concerning the operation
of the machine and who are informed about the associated dangers. The minimum
age requirement must be complied with. In addition to the safety instructions
in this operating manual and the separate regulations of your country, the
generally recognised technical rules for operating woodworking machines must
also be observed.
Layout (Fig. 1)
- Battery
- Contacts
- Release button
- LED for battery state of charge indicator
- Button for battery state of charge indicator
Scope of delivery
- Open the packaging and take out the equipment with care.
- Remove the packaging material and any packaging and/or transportation braces (if available).
- Check to see if all items are present.
- Inspect the equipment and accessories for transport damage. In case of complaints, the supplier is to be informed immediately. Complaints received at a later date will not be acknowledged.
- If possible, keep the packaging until the end of the guarantee period.
Important!
The equipment and packaging material are not toys. Do not let children play
with plastic bags, foils or small parts. There is a danger of swallowing or
suffocating!
Safety instructions for Li-ion batteries
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious
injuries. Save all warnings and instructions for future reference.
- Do not open the battery. There is a risk of a short circuit.
- Protect the battery from heat, e.g. from continuous exposure to sunlight, fire, water and humidity. There is a risk of explosion.
- In case of damage and improper use of the battery, vapours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irritate the respiratory system.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Use only original batteries with the voltage indicated on the rating plate of your electric power tool. If other batteries are used, e.g. imitations, reconditioned batteries or third-party products, there is a risk of injuries as well as damage caused by exploding batteries.
- The battery voltage must match the battery charging voltage of the battery charger. Otherwise there is a risk of fire and explosion.
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Pointed objects, such as nails or screwdrivers, or external forces may damage the battery. This may cause an internal short-circuit and the battery to burn, smoke, explode or overheat.
Warning! This electric tool generates an electromagnetic field during operation. This field can impair active or passive medical implants under certain conditions. In order to prevent the risk of serious or deadly injuries, we recommend that persons with medical implants consult with their physician and the manufacturer of the medical implant prior to operating the electric tool. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for equivalent purposes.
Technical specifications
Battery state of charge
- Press the button to check the state of charge at the state of charge indicator LED.
The indicator goes out after 5 seconds. If the LED flashes, the battery must be recharged. If the LED not lights up after the button is pressed, the battery is faulty and must be replaced.
Information to ensure a long battery service life
CAUTION!
- Never charge batteries at temperatures below 0 °C or above 40 °C.
- Do not charge batteries in an environment which has high air humidity or at a high ambient temperature.
- Do not cover batteries and/or the battery charger during the charging process.
- Disconnect the charger mains plug after charging the battery.
Battery and charger heat up during the charging process. This is perfectly normal! Lithium ion batteries do not exhibit the well known “memory effect”. Nevertheless, before a battery is recharged, it should be fully discharged and the charging process always run to the end.
NOTE.
- Follow the instructions for charging the battery in the operating instructions for the electric power tool and the battery charger.
- Reduced operating times after recharging indicates that the battery is worn out. The battery must be replaced.
- If the batteries are not used for a prolonged period, store batteries partially charged and in a cool location (10–25 °C).
Transport
The equivalent lithium content of the batteries included in the product
package is below the appropriate limit values. Therefore the battery as an
individual component as well as the power tool and its product package are not
subject to national or international dangerous goods regulations. If several
machines with lithium ion batteries are transported, these regulations may
become relevant and special safety measures may be required (e.g. for the
packaging). In this case find out about the currently valid regulations for
the country of use.
CAUTION!
Do not post batteries that have a damaged casing.
CAUTION!
Returns only possible in the original box.
Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in
transit. The raw materials in this packaging can be reused or recycled. The
equipment and its accessories are made of various types of material, such as
metal and plastic. Defective components must be disposed of as special waste.
Ask your dealer or your local council.
Disposal information
WARNING!
Do not throw accumulators/batteries into the household waste, fire or water.
Do not open disused batteries. Accumulators/batteries should be collected,
recycled or disposed of in an environmentally friendly manner.
Old devices must not be disposed of with household waste!
This symbol indicates that this product must not be disposed of together with
domestic waste in compliance with the Directive (2012/19/EU) pertaining to
waste electrical and electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can occur, for example, by
handing it in at an authorized collecting point for the recycling of waste
electrical and electronic equipment. Improper handling of waste equipment may
have negative consequences for the environment and human health due to
potentially hazardous substances that are often contained in electrical and
electronic equipment. By properly disposing of this product, you are also
contributing to the effective use of natural resources. You can obtain
information on collection points for waste equipment from your municipal
administration, public waste disposal authority, an authorized body for the
disposal of waste electrical and electronic equipment or your waste disposal
company.
Batteries and rechargeable batteries do not belong in household waste!
As the consumer you are required by law to bring all batteries and
rechargeable batteries, regardless of whether they contain harmful substances
or not, to a collection point run by the local authority or to a retailer, so
that they can be disposed of in an environmentally friendly manner. labelled
with: Cd = cadmium, Hg = mercury, Pb = lead
- Remove the batteries from the laser before disposing of the machine and the batteries.
Warranty
Apparent defects must be notified within 8 days from the receipt of the goods. Otherwise, the buyerís rights of claim due to such defects are invalidated. We guarantee for our machines in case of proper treatment for the time of the statutory warranty period from delivery in such a way that we replace any machine part free of charge which provably becomes unusable due to faulty material or defects of fabrication within such period of time. With respect to parts not manufactured by us we only warrant insofar as we are entitled to warranty claims against the upstream suppliers. The costs for the installation of the new parts shall be borne by the buyer. The cancellation of sale or the reduction of purchase price as well as any other claims for damages shall be excluded.