tp-link POE150S PoE Injector Splitter Installation Guide
- May 15, 2024
- tp-link
Table of Contents
tp-link POE150S PoE Injector Splitter
Product Information
Specifications
- Model: POE150S (PoE Injector), POE10R (PoE Splitter)
- Output Power: POE150S – 15.4W
- Supported Devices: PoE IP Camera, PoE AP, PoE IP Phone
- Input Voltage: 48V DC
- Output Voltage Options: 12V, 9V, 5V
Frequently Asked Questions
- Q: Can I use the PoE Injector with any PoE device?
- A: No, ensure that the PoE device’s power requirement does not exceed the maximum output power of POE150S (15.4W).
- Q: How do I determine the required voltage for the non-PoE device when using the PoE Splitter?
- A: Before connecting, set the voltage on the PoE Splitter to match the voltage requirement of your non-PoE device (12V, 9V, or 5V).
Some models featured in this guide may be unavailable in your country or region. For local sales information, visit https://www.tp-link.com.
For simplicity, we will take POE150S and POE10R for example throughout the Guide, other models may differ in appearance.
CONNECTIONS
PoE Injector Only
- The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.
Note
- The maximum output power of POE150S is 15.4W. PoE devices that require more than 15.4W are not supported.
PoE Splitter Only
- The PoE Splitter can be used with a PoE/PoE+ switch to deliver direct current (DC) power and data to a Non-PoE device.
PoE Injector & Splitter
- The PoE injector and PoE splitter can be used as a kit to supply power and transmit data to a Non-PoE device.
Power LED Explanation
PoE Injector
PoE Splitter
FAQ
- Q1. Can the PoE injector supply power to a PoE device which doesn’t have a gigabit PoE port?
- A: Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps auto-negotiation.
- Q2. What can I do if my PoE injector doesn’t supply power to the powered device or the supplied power is unstable?
- A1: Ensure the PD is PoE-compliant and its connecting port supports the PoE function.
- A2: Ensure the power consumption of the PD doesn’t exceed 15.4 W, otherwise the overload protection of the PoE injector will be activated. The quality and length of the Ethernet cable may influence the reception of the power supply.
- Q3. Must I use the PoE injector together with the PoE splitter?
- A: No. The PoE injector can supply power to all PDs support PoE function. The PoE splitter is used with a PoE switch or the PoE injector to supply power to a non-PoE device.
- Q4. The Power LED of PoE injector is not lit.
- A1: Ensure the power cord is connected the PoE injector with power source properly.
- A2: Ensure the power consumption of the PD doesn’t exceed 15.4 W, otherwise the PoE injector will activate the overload protection and the power will be cut off.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use any other chargers than those recommended.
- Do not use damaged charger or USB cable to charge the device.
- Adapter shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
FCC STATEMENT
FCC compliance information statement
Product Name: PoE Injector
Model Number: POE150S
| Component Name | Model |
|---|---|
| I.T.E. POWER SUPPLY | T480038-2B1 |
Product Name: PoE Splitter
Model Number: POE10R
Responsible party:
TP-Link USA Corporation
- Address: 10 Mauchly, Irvine, CA 92618
- Website: https://www.tp-link.com/us/
- Tel: +1 626 333 0234
- Fax: +1 909 527 6804
- E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
FCC compliance information statement
- Product Name: I.T.E. POWER SUPPLY
- Model Number: T480038-2B1
Responsible party:
TP-Link USA Corporation
- Address: 10 Mauchly, Irvine, CA 92618
- Website: https://www.tp-link.com/us/
- Tel: +1 626 333 0234
- Fax: +1 909 527 6804
- E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Industry Canada Statement
- CAN ICES-3 (B)/NMB-3(B)
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Specifications
General Specifications
Environmental and Physical Specifications
Declaration of Conformity
EU Declaration of Conformity
- TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
- The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
UK Declaration of Conformity
- TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
- The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca
Explanation of the symbols
Explanation of the symbols on the product label
Symbols may vary from products. The label is at the bottom of the product.
Information
- To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community.
- For technical support and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
Scan
Documents / Resources
| tp-
link POE150S PoE Injector
Splitter
[pdf] Installation Guide
POE150S PoE Injector Splitter, POE150S, PoE Injector Splitter, Injector
Splitter, Splitter
---|---
References
- Link: Simple, secure one-click payments
- TP-Link Community
- WiFi Networking Equipment for Home & Business | TP-Link
- CE Regulatory Compliance | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
- Regulatory Compliance | TP-Link
- WiFi Networking Equipment for Home & Business | TP-Link