V-TAC VT-525 Emergency Kit Compatible With LED Panel Lighting Instruction Manual

May 15, 2024
V TAC

V-TAC VT-525 Emergency Kit Compatible With LED Panel Lighting

V-TAC VT-525 Emergency Kit Compatible With LED Panel Lighting

TECHNICAL DATA

Model VT-525 VT-518
SKU 8275 60303
Watts 24W 45W
Voltage DC: 20-80V DC: 30-42V
Led Output Power AC:220-240V, 50/60Hz AC:220-240V, 50/60Hz
Charging Time 24 Hours 24 Hours
Working Time 3 Hours 3 Hours
Battery Ni-CD, 7.2/2000mAh Ni-CD, 7.2/4000mAh
Output Power 4W Max 10W Max
IP Rating IP20 IP20
LED Indicator Green Light Color Green Light Color
AC wire length 35cm 35cm
DC wire length 40cm 40cm
Dimension 465x52x33mm 455x52x33mm

WARNING!

  1. Please make sure to turn off the power before starting the installation.
  2. Installation must be performed by a qualified electrician.

 This marking indicates that this product should not be disposed of with other household wastes.
  Caution, risk of electric shock.

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.

CAUTION

  1. Please strictly follow the instructions for use;
  2. Do not replace the parts and do the transformation of product;
  3. Battery is empty state, please charge more than 36hours before using;
  4. Connect power but light does not work, please check whether lamps are properly connected to the mains;
  5. Please strictly use the Emergency kit according to the wiring diagram before connection and pay attention to reverse connection;
  6. Please pay attention to the battery electrodes should be connected in right way, which is used to measure electricity;
  7. This Emergency kit is only suitable for use in indoor;

WIRE DIAGRAM

Caution: Please cut off the power when installation!

Wire Diagram

Customer Support

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

Symbols

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals