Paulmann 711.34 Ravi Pendant Light Installation Guide
- May 15, 2024
- Paulmann
Table of Contents
Paulmann 711.34 Ravi Pendant Light
Product Information
Specifications:
- Model: PHD 03/23
- Input Voltage: 230V~
- IP Rating: IP44
- Cable Length: 5mm
- Bulb Diameter: 14mm
Product Usage Instructions
Installation:
- Stretch the cable to the desired length.
- Ensure the product is connected to a 230V~ power source.
- Refer to the symbols guide at www.paulmann.com/symbols for proper setup.
Operation:
- Place the product in the desired location.
- Turn on the power source (230V~).
- Avoid touching the product when in use as it may become hot.
Maintenance:
- Regularly check the cable for any wear and tear.
- Clean the product using a soft, dry cloth when necessary.
Frequently Asked Questions
- Q: What should I do if the product does not turn on?
- A: Check the power source connection and ensure it is receiving 230V~. If the issue persists, contact customer support for assistance.
- Q: Is the product suitable for outdoor use?
- A: Yes, the product has an IP44 rating, making it suitable for outdoor use. However, ensure proper installation to prevent water damage.
What In The Box
Tools
Installation Instructions
Replaceability
- Light source or
- Light source without permanently damaging the luminaire.
- Light source
- the operating device can be replaced by end users without permanent damage to the luminaire.
- the operating device can be replaced by a qualified electrician
- the operating device is not replaceable, the luminaire must be replaced
Contact
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>