Aitoplus B0BD7Y897W Car Steering Wheel Control Button User Manual
- May 15, 2024
- AITOPLUS
Table of Contents
Aitoplus B0BD7Y897W Car Steering Wheel Control Button
Product Information
Specifications:
- Product Name: Car Steering Wheel Control Button
- Compatibility: Works with Android / Wince car multimedia players
- Size: 8cm x 2cm x 3cm
- Battery: CR2032 lithium battery included
- Battery Life: Approximately 6 months based on personal use frequency
Product Usage Instructions
Installation:
- Connect the wire connector to the receiver box.
- Attach the key body to the steering wheel using invisible straps.
Setting Up:
- Enter the steering wheel control interface of the car multimedia player.
- Click the refresh key on the screen.
- Press a function key on the screen and then press the corresponding key on the product body to pair them.
Battery Replacement:
- To change the battery, unscrew the back of the product where the battery is located.
- Replace the CR2032 button battery with a new one.
NOTE:
The product can work with android /wince car multimedia player. Do not work
with PC, Headrest monitor, roofmout monitor, or smartphone .
Product Description
The product includes CR2032 lithium battery. When the steering wheel controller stop using time reaches 1 minute, the steering wheel controller will enter the shutdown state, you just need to click any key to wake up.
Packing List
- 1 x steering wheel controller
- 1*receiver box
- 1 x wire connector
- 1 x user’s manual
The Light Button
Press any button, the light will be on and keep for 4 seconds.
Key Pair
After Wire connection, please enter steering wheel control interface of car multimedia player, click refresh key, and click the function key on screen and then press the corresponding key on the product body. Learning them one by one.
Wire Connection Diagram
RRed Wire: Connect with ACC/ Positive +
Black Wire: Connect with GND / Negative –
White Wire: Connect with Key 1, or key 2 wire of car multimedia player TIPS:
If car multimedia player has one key wire: two white wires connect with the
key.
Q&A
Q: How are the buttons powered? How long does it last? How to change the battery?
The buttons are powered by a built-in CR2032 button battery, lasting approximately 6 months. To change the battery, unscrew the back of the product and replace it with a new CR2032 battery
Q: Is it compatible with Pioneer stereos?
A: Yes, it is compatible. But the car radio must support steering wheel control button
Q: Do you have to wire it for installation? I thought it was wireless.
A: The buttons are wireless, but the receiver has to be wired.
Q: How to determine whether there is a square control line?
A: Rear mounted Android large screen navigation, most of them have a square control line, there are 3 ways to find a square control line: 1. navigation harness sticker labels; 2. circuit definition diagram: body stickers, manuals or ask the seller of the navigation; 3. Multi meter to measure voltage.
Q: Do I have to remove the steering wheel?
A: Not the steering wheel, just the navigation.
Q: How to set up after connecting the wires?
A: Every wire is wrapped with electrical tape to avoid burning the machine by touching the wire, find the system steering wheel settings, hold down a button of the square control for 2 seconds, hold it down and then click the command of the navigation screen.
Q: How are the buttons powered? How long does it last? How to change the battery?
A: Built-in CR2032 button battery, according to personal use frequency, generally about 6 months; the back of the screws can be replaced.
Q: What steering wheels can be installed?
A: Using invisible straps, 99% of steering wheels can be installed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>