avedio links OZF12C 1X2HDMI Audio Splitter User Manual
- May 15, 2024
- avedio links
Table of Contents
1X2 HDMI AUDIO SPLITTER
USER MANUAL
Fighting for The Dream
Introduction
The 1×2 HDMI 2.0b splitter distributes 1 HDMI source to 2 HDMI displays at the same time. It provides solutions for HDTV retailers, show sites, HDTV, STB, DVD and projectors, factories, space, security issues, data center control, information distribution, conference room presentation, school and corporate training environments.
Specification
| Input Video Signal | 0.5-1.0 Volts P-P |
|---|---|
| Input DDC Signal | 5 Volts P-P (TTL) |
| Max Single Link Range | 3860 x 2160P / 60Hz |
| Output Video | HDMI 2.0b + HDCP 1.0/1.1/1.2/1.3/1.4/2.3 |
| Resolutions DTV/HDTV | 480P/576i/576P/720P/1080i/2160P |
| HDMI Version | HDMI 2.0b |
| Operating Frequency | Up to 600 MHz |
| EIDI Duration | 4 seconds |
| Power Supply | 5V/1A |
| Frequency Bandwidth | 18.5Gbps |
| Deep color | 30 bit, 36 bit, 48 bit per pixel |
| Digital Audio Format | DTS-HD/ Dolby Atmos/ Dolby true HD/Digital 7.1CH/ LPCM |
7.1/ DTS/ Dolby AC3/ DSD/ DTS:X
Connection
A) Connect the input source and output displays to the HDMI splitter.
Please refer to the connection Image.
B) Connect the DC 5V power supply to the splitter. Please note that
higher voltage power supplies may damage the splitter.
C) When the input source and output displays are connected and turned on,
the corresponding LED will light up.
Attention: In order to protect the splitter and your devices, please make
sure that the splitter is powered off before connecting or extracting the
video and the monitor. Please plug and unplug the HDMI cable gently.
Box Contents
| Item | Qtym |
|---|---|
| 4K 60Hz HDMI Splitter 1×2 | 1 PC |
| High Quality HDMI Cable | 1 PC |
| 5V 1A Power Adapter | 1 PC |
| User Manual | 1 PC |
TV Mode: Provide the resolution supported by the display.
For this mode, HDMI/Audio OUT and HDMI OUT both connect the display device to
display video.
Multi CH Mode:
Support LPCM 7.1CH, Dolby, True HD, DTS-HD HDMI Audio. If HDMI/Audio OUT
connect the audio device, HDMI OUT connect the display device, please dial
theEDID to Multi CH position, otherwise the HDMI//Audio OUT will not output
the audio.
1 x 2 HDMI Splitter Mode K
Mixed Mode
HDMI output 2 can connect HDMI audio device!
VIDEO:
- 4 @60Hz 4:4:4, HDR Dolby Vision, HDR 10+, 1080P@120Hz/60Hz, 144P@60Hz
- HDMI down-scale 4K to 1080P@60 Hz only
AUDIO:
- DTS-HD/ Dolby Atmos/ Dolby true HD/ Digital 7.1CH/ LPCM 7.1/ DTS/ Dolby AC3/ DSD/ DTS:X
If one of your display support up to 4K@60Hz, and the second display support up to 1080P, then the second display will downscale to 1080P automatically. One of the display will show 4K@60Hz resolution, the other one will show 1080P resolution.
N TE: Does NOT support resolution downscale from 4Kx2K@60Hz 4:2:2 to 1080P.
- This NOT a switcher, Not support display multiple HDMI source on 1 TV.
- The two outputs of this 1×2 HDMI splitter scaled 4k can only be used alone with 1080P.
- Do not reduce the ratio of HDR Dolby Vision (4K@60Hz 4:2:2) and frequency. There is No VRR.
- ARC/eARC is NOT supported; 4K@120Hz is not supported.
TIPS: O
- HDMI cable support MAX length 49FT standard for 26AWG(19+1); HDMI cable input up to 8 meters, output up to 8 meters.
- If the screen appear red, it is because the display does not support Dolby vision. It is recommended to turn off the Dolby Vision of the input source.