EXCALIBUR 4 Button 1 Way Remote Start Systems User Guide
- May 15, 2024
- EXCALIBUR
Table of Contents
- EXCALIBUR 4 Button 1 Way Remote Start Systems
- Product Information
- Product Usage Instructions
- Frequently Asked Questions
- Additional Features
- System Upgrades
- REPLACING YOUR REMOTE BATTERY
- SECURITY*, KEYLESS ENTRY, & CONVENIENCE FUNCTIONS
- REMOTE START FUNCTIONS
- AUXILIARY REMOTE FUNCTIONS
- REMOTE START ERRORS
- FCC
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EXCALIBUR 4 Button 1 Way Remote Start Systems
Product Information
Specifications:
- Model: 4 Button / 1 Way Remote Start Systems
- Manufacturer: Omega Research & Development Technologies, Inc.
- Year: 2019
- Remote Battery Types: CR2032 (1), CR2016 (2)
Product Usage Instructions
Replacing Your Remote Battery
Steps:
- Find the part # on the back of the remote to identify the battery.
- Remove the screw from the back of the remote.
- Gently pry the case in halves apart to access & replace the battery.
Security, Keyless Entry, & Convenience Functions
Function | Button(s) | Note |
---|---|---|
Lock & Arm | – | Security enabled systems will flash the status LED. |
Lock Only | – | Ideal for occupied vehicles, RV’s, etc. |
Remote Start Functions
Function | Button(s) | Note |
---|---|---|
Engine Start/Stop | x 2 | Activation is programmable. |
Run Time Extender | – | The system will restart the internal run timer. |
Frequently Asked Questions
Q: How can I disable the security system temporarily?
A: To disable the security system temporarily, you can utilize the Valet Button function. Consult your installer for more details on this feature.
Q: Can I customize the system options for my specific needs?
A: Yes, you can customize certain system options based on your preferences. Please refer to the complete operation guide for detailed instructions on customization.
Q: How do I know when to replace the remote battery?
A: If you notice decreased remote responsiveness or if the LED indicators are dim, it may be time to replace the remote battery. Follow the steps outlined in the manual for replacing the battery.
Visit www.CarAlarm.com today
To Download your complete operation guide and learn more about:
Additional Features
- Anti-Carjacking Mode
- Secure Code Override
- Turbo Timer Support & Operation
- Customizing System Options
- Passive Security Functions
- Emergency Override
System Upgrades
- Linkr Smartphone Control
- 2-Way Controllers w/ Extended Range
- Upgrading To Full Security With Sensors & Siren
REPLACING YOUR REMOTE BATTERY
SECURITY*, KEYLESS ENTRY, & CONVENIENCE FUNCTIONS
REMOTE START FUNCTIONS
MANUAL TRANSMISSION RESERVATION MODE
This must be performed before you can remote start a manual transmission vehicle to ensure the car is in neutral & maximum safety. Consult your installer for more information.
- With the engine running (more than 10 seconds), hold the brake pedal & place the transmission in neutral.
- Apply the parking brake and release the brake pedal.
- Send the remote start command via your remote. The remote start should engage (not crank) and the status LED will begin flashing.
- Take the ignition key out of the switch (the engine should stay running).
- Exit the vehicle and lock your doors with the remote. The engine will turn off.
WINDOW-MOUNT ANTENNA/RECEIVER
AUXILIARY REMOTE FUNCTIONS
*These special functions may not be available on your vehicle. Consult your installer.
PROGRAMMING REMOTES TO THE SYSTEM (UP TO 4)
BEFORE YOU BEGIN: Have all remotes for the system at hand.
-
Turn the ignition key “ON” (do not start).
-
Press the valet button 5 times within 5 seconds of step 1.
The horn will briefly sound -
Press & release the “lock” button on each transmitter one after the other.
- 1-button models, press the “start” button.
- The siren/horn will chirp once for each transmitter.
- NOTE: When the first remote is learned all previous remotes are erased.
- NOTE: All other button functions will automatically be assigned.
-
Turn the ignition key “OFF”.
NOTE: The system will exit at any time after 10 seconds of no activity.
REMOTE START ERRORS
If the system fails to remote start or remote start stops unexpectedly, it
will give a long horn/siren chirp followed by a series of short horn/siren
chirps & light flashes. The short chirps/light flashes indicate the cause of
the failure.
TIP: If remote start won’t activate, the system may be in valet mode
(Status LED ON). Press the valet button once to exit.
Problems? Questions? Contact Customer Service:
800-554-4053 (toll free) |
+1-770-942-9876 (outside USA)
Scan to register & download the full operation guide at CarAlarm.com!
Your System Model
(Installer, write system model above)
*Security-related functions only available on some models. Consult your installer to upgrade
Register today at www.CarAlarm.com to activate/learn about your warranty & download a complete operation guide.
FCC
This device complies with FCC Rules part 15. Operation is subject to the following two conditions:
- This device may not cause harmful interference &,
- This device must accept any interference that may be received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Copyright 2019 Omega Research & Development Technologies, Inc. QOM_4BUT1WAY_20190729
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>