EXCALIBUR RXV TSUNAMI Cushion Set Instruction Manual
- June 13, 2024
- EXCALIBUR
Table of Contents
TSUNAMI CUSHIONS
E-Z-GO® RXV®, TXT®,
YAMAHA® DRIVE®, DRIVE2®
INSTALLATION INSTRUCTIONS
RXV TSUNAMI Cushion Set
INCLUDED
Left Bracket
Right Bracket
Hardware Pack
TOOLS NEEDED
10mm Wrench
Phillips Screwdriver
Ratchet w/ 7/16” Socket
Professional installation is recommended. If you choose not to have this
product installed by a professional, we highly recommend that you exercise
caution, care and patience when installing this product as it involves
drilling holes into your cart’s body.
STEP 1 Remove factory front seat. Remove and retain hip restraints.
Remove hinges and hardware.
STEP 2 Install retained hip restraints and hinges on seat bottom of new
seat. Do not over tighten. STEP 3 Select bolt holes based on your cart model
and install to lean back. Do not over tighten.
STEP 4 Using provided hardware, install seat back. Do not over tighten.
Installation Complete
E-Z-GO®, TXT®, and RXV® are registered trademarks of Textron Innovations, Inc.
(“Textron”). Reference to Textron’s trademarks and products is only for
purposes of identifying golf carts with which this product is compatible.
These products are aftermarket parts and are not original equipment parts.
Excalibur is not connected or affiliated with or sponsored by Textron® or
E-Z-GO®.
Yamaha®, G-14®, G-19®, and G-22® are registered trademarks of Yamaha Golf-Car
Company and Yamaha Motor Corporation (“Yamaha”). Reference to Yamaha’s
trademarks and products is only for purposes of identifying golf carts with
which this product is compatible. These products are aftermarket parts and
are not original equipment parts. Excalibur is not connected or affiliated
with or sponsored by Yamaha Motor Corporation or Yamaha Golf-Car Company.