COSTWAY HW67780 1 Piece Plastic Wicker Outdoor Instruction Manual
- May 15, 2024
- COSTWAY
Table of Contents
RATTAN SUN LOUNGER
CHAISE LONGUE EN ROTIN
HW67780
Before You Start
Please read all instructions carefully.
Retain nstructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all tems are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
Notice
- 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
- Place the item on a flat ground to adjust and make sure it remains stable.
- Tighten up all screws with tools gradually.
- If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
- If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again.
- Note : If one or some screws are fully tightened during assembly, chances are the others will not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.
Part & Hardware List
Connect Left Frame (B) & Side Left Frame (D) with Bolt (2) & Washers (5)
Connect Right Frame (A) & Side Right Frame (C) with Bolt (2) & Washers (5)
Connect part from STEP 1 & Front Frame (E) & Back side Frame (G) with Bolt (2) & Washers (5)
Connect part from STEP 2 & STEP 3 with Bolt (2) & Washers (5)
Connect part from STEP 4 & Seat Frame (F) with Bolt (2), (3) & Washers (5)
Connect part from STEP 5 & Back Frame (H) with Bolt (1) & Washers (5)
Connect part from STEP 6 & Left Arm (J) with Bolt (2), (3), (4) & Washers (5)
Connect part from STEP 7 & Right Arm (I) with Bolt (2), (3), (4) & Washers (5)
Backrest tilt angle can be adjusted
Put on Seat Cushion (K), & Pillow (L) to Complete Sun lounger
Return / Damage Claim Instructions
DO NOT discard the box I original packaging.
In case a return is required, the tem must be returned in original box.
Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box s required in case a
part is needed for replacement. This helps our staff identify your product
number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your
replacement or refund processed quickly. Please make sure you have the box
even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.