COSTWAY JV11233 Mirror Jewellery Cabinet User Manual
- May 15, 2024
- COSTWAY
Table of Contents
Mirror
Jewellery Cabinet
JV11233
JV11233 Mirror Jewellery Cabinet
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
**** Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking
hazard.
Accessories list
| Long screw
---|---
| The key
| Small cross screw assembly
| Big cross screw assembly
| Bolt driver
| Wheel
| Eye-screw
| Wood dowel
| Acrylic left and right accessories
| Cross nuts and gaskets
| Two in one screw
| Small iron gasket
| Two in one screw
| Screw
| Anti-rewind
| Self tapping wire
| Colloidal granules/Self tapping wire
Product Diagram
- Jewelry cabinet
- Wooden leg
- Cross bar of support frame
- Bottom cabinet board
- Bottom cabinet backboard
- Bottom cabinet right panel
- Bottom cabinet left panel
- Cabinet bottom plate
- Drawer board
- Cardboard
Press the wheel lock
Use short Two in one screw M
(628mm)
Use long Two in one screw K (635mm)
Use Small cross
screw assembly C (1210mm)
Use Small cross screw assembly C (1210mm)
Use Big cross screw assembly D (15*12mm)
You can install the wood dowel
in different positions according to individual needs.
Open the flannelettedrawer and put thecardboard
down
Battery installation
(Tip: use 3 AA Batteries)
**** Return / Damage Claim Instructions
DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box.
Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a
part is needed for replacement. This helps our staff identify your product
number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your
replacement or refund processed quickly. Please make sure you have the box
even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.
USA office: Fontana
office: FDS Corporation Limited,Unit 4, Blackacre Road,
Great Blakenham,Ipswich, Ip6 0FL,United Kingdom
If you’re having difficulty, our friendly customer team is always here to
help.
USA:cs.us@costway.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>