ZOLON L1450 Smart Desktop Terminal User Guide
- May 15, 2024
- ZOLON
Table of Contents
ZOLON L1450 Smart Desktop Terminal
Specifications
- Operation System: Android 11
- CPU: Octa-core, 2.0GHz processor
- Memory: 3GB RAM + 32GB Flash Memory
Product Usage Instructions
Installation
- Type-C port: Connect Power Adapter/Elys Hub/ USB device.
- Type-A: Connect USB device.
- 6pin Pogopin Port: Connect D135 device.
- Mini-SAM: Please insert the SAM card into the SAM card slot according to the direction.
Instructions
Power ON/OFF
Power on: Press and hold the Power button (on the top) for three seconds
until the main screen displays normally.
Power off: Press and hold the Power button (on the top) for three seconds
until the shutdown menu appears, tap Shutdown, and then ‘shutting…’ appears.
The terminal will be turned off after a few seconds.
Paper Installation
- Open the external printer cover by pushing it outward with fingers from the printer cover opening (where the arrows point to).
- Load the paper roll and make sure a part of the paper is exposed.
- Close the printer covers. The paper is changed successfully.
General Usage Tips
Avoid placing this product in direct sunlight for extended periods, nor in
environments with excessively high temperature, moisture, or dust. Only
qualified personnel should repair this product. Before using cards in the chip
& magstripe readers, please ensure they are free from any foreign objects. Do
not plug/unplug any units of the product when it is powered on, otherwise, it
may damage the internal circuit.
Important Safety Warning
We recommend you only use power adaptors supplied by Zolon Technology. If you
must use 3rd party supplier accessories, please ensure specifications meet
exactly those recommended for our products, which must comply with
international and local regulations & standards. Non-compatible power
supplies, chargers, or batteries could cause fires or even explosions, and
will invalidate any product warranty.
FAQ
Q: Can I use any power adapter with the Smart Desktop Terminal?
A: It is recommended to use power adapters supplied by Zolon Technology
to ensure safety and warranty validity.
Q: How do I change the paper roll in the external printer?
A: Follow the instructions provided in the manual for paper installation.
Open the external printer cover, load the paper roll ensuring a part is
exposed, and close the printer covers.
Q: What should I do if I encounter issues with card readers?
A: Ensure that cards inserted are clean and free from foreign objects
before using them in the chip & magstripe readers.
Checklist
Congratulations on receiving your Zolon Technology payment terminal. We do
hope you enjoy it! The box you
have just opened should contain the following items:
- 1 x Zolon L1450 Smart Desktop Terminal
- 1 x Power Adapter
- 1 x AC Power Cable
- 1 x T3400 Elys HUB(optional)
Product Description
Installation
-
Type-C port:
Connect Power Adapter/Elys Hub/ USB device. -
Type-A:
Connect USB device. -
6pinPogopin Port:
Connect D135 device. -
Mini-SAM:
Please insert the SAM card into the SAM card slot according to the direction
Instructions
-
Power ON/OFF
-
Power on:
Press and hold the Power button (on the top) for three seconds until the main screen displays normally. -
Power off:
Press and hold the Power button (on the top) for three seconds until the shutdown menu appears, tap “Shutdown”, and then shutting…”appears. The terminal will be turned off after a fewseconds.
Specification
-
Operation System:
Android 11 -
CPU:
Qcta-core,2.0GHzprocessor -
Memory:
3GB RAM + 32GB Flash Memory -
Main-Display:
14 inch,resolution:1920*1080, multi-touch capacitive touch screen -
Guest Display:
7 inch, resolution: 1280*800, multi-touch capacitive touch screen -
Audio:
Built-in dual speaker/Built-in dual MIC -
Fingerprint:
Side fingerID -
Camera:
2* 5 mega-pixel auto-focusing camera -
Wireless Communication:
Support Wi-Fi®2.4/5G,Bluetooth® 5.0 -
Peripheral Ports:
2Type-C ports,16PIN Pogopin port,1*Type-A -
Printer:
3″ high-speed thermal printer with auto-cutter, printing speed: 220mm/s -
Input:
2x Type C female -
Output:
-
Type C female:
USB2.0,support the PD protocol,Support 20V/3.25A input and 5V 3A output -
1 x USB-Type A female:
USB 2.0, Single port can output 5V/2A power. -
1 x POGO PIN:
USB 2.0, Single port can output 5V/1A power.
-
Paper Installation
- Open the external printer cover by push it out ward with fingers from the printer cover opening (that thearrows point to).
- Load the paper roll and make sure a part of paper is exposed.
- Close the printer covers. The paper is changed successfully.
General Usage Tips
Avoid placing this product in direct sunlight for extended periods, nor in
environments with excessively high temperature, moisture or dust.
Only qualified personnel should repair this product.
Before using cards in the chip & magstripe readers, please ensure they are
free from any foreign objects.
Do not plug/unplug any units of the product when it is power on, otherwise, it
may damage the internal circuit.
Important Safety Warning
We recommend you only use power adaptors supplied by Zolon Technology. If you
must use 3rd party supplier accessories, please ensure specifications meet
exactly those recommended for our products, which must comply with
international and local regulations & standards. Non-compatible power
supplies, chargers or batteries could cause fires or even explosions and will
invalidate any product warranty.
Environmental Parameters
-
Working Environment:
Temperature:0℃~50℃(14℉~122℉) -
Storage Environment:
Temperature:-20℃~70℃(-4℉~158℉) (non-charging) -
Humidity:
5%~95% (non-condensing)
Icons
Trademark notice:
“The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use ofsuch marks by Zolon Technology Limited is
under license. Other trademarks and trade names are those oftheir respective
owners.”
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void theuser’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmfulinterference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation ofthe device.
The user manual for LE-LAN devices shall contain instructions related to the
restrictions mentioned in the above sections, namely that:
i. the device for operation in the band 5150–5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems.
FCC ID: 2AV5BL1450 IC ID: 26043-L1450
IC Radiation Exposure statement
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.This equipment should be installed and
operated with minimum distance 20cm between the radiator andyour body.
Shenzhen Zolon Technology Co., Ltd.
Manufacturer: | Shenzhen Zolon Technology Co.,Ltd. |
---|---|
Address: | 401, Building 3, Shenzhen Software Park, Maling Community, Yuehai |
Street, Nanshan District, Shenzhen City, Guangdong Province, P.R.C
Tel:| +86 755 86727847
Website:| www.szzolon.com
Zolon continually invests to maintain its high-quality products up to date with the latest certifications, therefore a comprehensive list can be requested via the website’s contact form or on downloadable product brochures.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>