ZOLON L1400 Smart Desktop Terminal User Guide

June 17, 2024
ZOLON

ZOLON L1400 Smart Desktop Terminal

ZOLON-L1400-Smart-Desktop-Terminal-PRODUCT

Product Information

Specifications

  • Operation System: Android 11
  • CPU: Octa-core, 2.0GHz processor
  • Memory: 4GB RAM + 64GB Flash Memory
  • Display: 14 inch, resolution: 1920*1080, multi-touch capacitive touch screen
  • Audio: Built-in dual speaker/Built-in dual MIC
  • Fingerprint: Side fingerID
  • Camera: 5 mega-pixel auto-focusing camera

Product Usage Instructions

Installation

Elys Station:

  • Type-C port: Connect Power Adapter/Elys Hub/ USB device.
  • 8pin Pogopin Port: Connect Elys Tablet device.
  • 6pin Pogopin Port: Connect D135 device.

Mounting Plate Installation steps:

  1. Tear off the tape on the back of the mounting plate and stick it to the table or fix it to the table with 4 screws.
  2. Place the station vertically against the mounting plate, then firmly press the area pointed by the arrow and the station will be automatically locked to the mounting plate.

Power Adapter and Elys Hub:

Refer to Figures 7, 8, 9, 10, and 11 in the manual for detailed installation and removal steps.

Instructions

Power ON/OFF:

  • Power on: Press and hold the Power button (on the top) for three seconds until the main screen displays normally.
  • Power off: Press and hold the Power button (on the top) for three seconds until the shutdown menu appears, tap Shutdown, and then shutting…appears. The terminal will be turned off after a few seconds.

General Usage Tips

  • Avoid placing the product in direct sunlight for extended periods or in environments with high temperature, moisture, or dust.
  • Only qualified personnel should repair the product.
  • Before using cards in the chip & magstripe readers, ensure they are free from foreign objects.
  • Do not plug/unplug any units of the product when it is powered on to prevent damage to the internal circuit.

FAQ

Q: Can I use this product outdoors?

A: No, this product is designed for indoor use only as per safety guidelines.

Q: How do I power on the device?

A: Press and hold the Power button on the top of the device for three seconds until the main screen displays.

Quick Setup Guide
L1400 Smart Desktop Terminal

Shenzhen Zolon Technology Co., Ltd.

Checklist

Congratulations on receiving your Zolon Technology payment terminal. We do hope you enjoy it! The box you have just opened should contain the following items:

  • 1 x Zolon L1400 Smart Desktop Terminal
  • 1 x Power Adapter
  • 1 x AC Power Cable
  • 1 x Mounting Plate(optional)
  • 4 x Mounting screws and thumb nuts(optional)
  • 1 x T3400 Elys HUB(optional)

Product Description

ZOLON-L1400-Smart-Desktop-Terminal-FIG-2 ZOLON-L1400-Smart-Desktop-Terminal-FIG-3 ZOLON-L1400-Smart-Desktop-Terminal-FIG-4

Installation

  1. Elys Station
    • Type-C port: Connect Power Adapter/Elys Hub/ USB device.
    • 8pinPogopin Port: Connect ElysTablet device.
    • 6pinPogopin Port: Connect D135 device.
  2. Mounting Plate
    Installation  steps

Tear off the tape on the back of the mounting plate and stick it to the table or fix it to the table with 4 screws.

ZOLON-L1400-Smart-Desktop-Terminal-FIG-6
Place the station vertically against the mounting plate, then firmly press the area pointed by the arrow and the station will be automatically locked to the mounting plate.

  *  **Removal  steps**

To remove the station, press the button pointed by the arrow and pick up the station vertically.

  *  **Power Adapter and Elys Hub**

ZOLON-L1400-Smart-Desktop-Terminal-FIG-8

Instructions

  • Power ON/OFF
    • Power on: Press and hold the Power button (on the top) for three seconds until the main screen displays normally.
    • Power off: Press and hold the Power button (on the top) for three seconds until the shutdown menu appears, tap “Shutdown”, and then shutting…”appears. The terminal will be turned off after a few seconds.

Specification

  • Operation System: Android 11
  • CPU: Qcta-core,2.0GHzprocessor
  • Memory: 4GB RAM + 64GB Flash Memory
  • Display: 14 inch,resolution:1920*1080, multi-touch capacitive touch screen Audio: Built-in dual speaker/Built-in dual MIC
  • Fingerprint: Side fingerID
  • Camera: 5 mega-pixel auto-focusing camera
  • Wireless Communication: Support Wi-Fi®2.4/5G,Bluetooth® 5.0
  • Peripheral Ports: 2Type-C ports,18PIN Pogopin port,1*6PIN Pogopin port

General Usage Tips

  • Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust.
  • Only qualified personnel should repair this product.
  • Before using cards in the chip & magstripe readers, please ensure they are free from any foreign objects.
  • Do not plug/unplug any units of the product when it is power on, otherwise it may damage the internal circuit.

Important Safety Warning

  • Do not place the terminal or battery in direct sunlight, nor in environments with excessively high temperatures, smoke, dust, or dampness.
  • Do not attempt to disassemble the battery, nor insert or use foreign objects to penetrate the casing. Never place the battery in a fire or excessively hot surfaces. Take care not to drop the battery. Excessive external shocks or pressure could cause battery liquid leakage or result in the battery catching fire or even exploding. Keep the battery well away from children and animals.
  • Immediately replace any battery which appears to be deformed, expanded or in an overheated state. We recommend you only use power adaptors supplied by Zolon Technology. If you must use 3rd party supplier accessories, please ensure specifications meet exactly those recommended for our products, which must comply with international and local regulations & standards. Non-compatible power supplies, chargers or batteries could cause fires or even explosions, and will invalidate any product warranty.
  • Charge the battery when the indicator level is low, but make sure to never charge a battery continuously for more than 24 hours. If a battery is not used for a long time, please charge it at least once every 6 months to avoid overcharge or discharge damage. For long-term optimal product performance, it is recommended that a battery be replaced after 2 years of continual usage.
  • When disposing of the device, battery, or accessories, please do so responsibly and according to local regulations. These are not household waste items. Improper disposal of the battery could cause a fire or explosion, and any liquid leakage could be damaging to the environment and toxic to humans & animals.

Environmental Parameters

  • Working Environment: Temperature:0℃~50℃(14℉~122℉) (non-charging)
  • Storage Environment: Temperature:-20℃~70℃(-4℉~158℉) (non-charging)
  • Humidity: 5%~95% (non-condensing)

Icons

Trademark notice:
“The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Zolon Technology Limited is under license. Other trademarks and trade names are those of their respective owners.”

Compliance Statements

FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC SAR statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.
  3. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
  4.  where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.

C SAR statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

Zolon Technology Co., Ltd.

  • Manufacturer: Shenzhen Zolon Technology Co.,Ltd.
  • Address: 401, Building 3, Shenzhen Software Park, Maling Community,  Yuehai Street, Nanshan District, Shenzhen City, Guangdong Province, P.R.C
  • Tel: +86 755 86727847
  • Website: www.szzolon.com

Zolon continually invests to maintain its high quality products up to date with the latest certifications, therefore a comprehensive list can be requested via the website’s contact form or on downloadable product brochures.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals