Stashed Products E-Bike Charger Wall Mounted Platform Instructions
- May 15, 2024
- Stashed Products
Table of Contents
Stashed Products E-Bike Charger Wall Mounted Platform
Product Information
Specifications:
- Product Name: Charge Station
- Type: E-Bike charger wall-mounted platform
- Manufacturer: Stashed Products
- Country of Origin: Wales, UK
Product Usage Instructions
Mounting Instructions:
-
Ensure suitable mounting points are available. Screws are at 325mm centers.
-
Mark hole positions and pre-drill holes. If mounting into a
structure other than timber, use suitable mounting components like raw plugs. -
Place screws through Cup Washer so countersunk head matches angled bore.
-
Screw the Charge Station to the structure while ensuring it is level. Ensure Cup Washer is flat against the surface.
Cable Holders Usage:
Place the charger on the Charge Station to allow heat to escape from the vents. Place cables into the cutouts and run plugs back to the cutout for storage.
Maintenance:
Regularly remove contents and wipe clean with a damp cloth. Wipe dry with a clean cloth. Avoid leaving the product damp or in a damp environment to ensure longevity.
FAQs
Q: What tools are required for installation?
A: You will need a T25 TX driver and a spirit level for proper installation.
Q: How should I clean the Charge Station?
A: Use a damp cloth to wipe the unit clean, then dry it with a clean cloth. Avoid leaving it damp or in a damp environment.
Q: Where can I find additional fitting examples and instructions?
A: You can visit our website at www.stashedproducts.co.uk for fitting examples and instruction videos or reach out to our experts for assistance.
CHARGE STATION
E-Bike charger wall mounted platform
These instructions are for mounting the Stashed Charge Station to a wooden
structure. Appropriate DIY experience is required to install this product
correctly, if in doubt get a professional to help.
If you are unsure on how to fit or use this product, please reach out and ask
our experts or look for fitting examples and instruction videos on our website
www.stashedproducts.co.uk
Contents:
- Charge Station x 1
- Cup Washer x 2
- TX 5mm x 40mm Wood Screw x 2
Tools Required:
- T25 TX driver
- Spirit Level
Fitting
- Ensure suitable mounting points available. Screws are at 325mm centers. Mark hole positions and pre-drill holes. If mounting in to structure other than timber then insert suitable mounting component such as a raw plug.
- Place screws through Cup Washer so countersunk head matches angled bore.
- Screw to structure ensuring Charge Station is level. Ensure Cup Washer is flat against surface.
Use
Place charger on Charge Station so heat can escape from the vents. Place cables in to cut outs and run plugs back to cutout for storage.
Maintenance
Remove contents and wipe clean with a damp cloth. Wipe dry with a clean cloth. Do not leave damp or in a damp environment.
MADE IN WALES by STASHED PRODUCTS
Unit 1, Y-Glyn, Llanberis, Caernarfon, Gwynedd, LL55 4EL, UK
www.stashedproducts.co.uk
[email protected]
+44 (0) 3301 334 836