CLATRONIC HSMR3313 Hair Clippers Instruction Manual

CLATRONIC HSMR3313 Hair Clippers

Product Information

The HAAR-/BARTSCHNEIDEMASCHINE HSM/R 3313 is a hair and beard trimmer designed for precise and efficient grooming. It comes with various features and specifications to ensure optimal performance.

Overview of the Components

• 1 = 5 mm
• 2 = 9 mm
• 3 = 13 mm
• 4 = 16 mm (approximate measurements; 3 mm without comb attachment)
• Ein- / Ausschalter (ON / OFF switch)
• Ladekontrollleuchte (charging indicator light)
• Ladestation / Aufsteller (charging station/stand)

Technical Data

• Model: HSM / R 3313
• Net weight: approximately 300 g
• Protection class:
• Input: DC 3.6 V, 200 mA

Note : For detailed technical specifications of the power supply, refer to the relevant section in the user manual.

Product Usage Instructions

Charging the Battery

To charge the battery:

1. The charging indicator light does not provide information about the battery’s charge level.
2. After 14 hours of charging time, always unplug the power supply from the socket.

Operating the Trimmer

To start using the trimmer:

1. Read and follow the instructions carefully.
2. Slide the ON/OFF switch (4) upwards.

Trimming and Shaving
The trimmer is designed for precise trimming of hair and beard contours, as well as clean shaving of the hairline in the neck area.

Cleaning
After each use, clean the trimmer with water. Ensure that the trimmer is turned off and disconnected from the power supply before cleaning.

Storage
Store the trimmer in a safe and dry place when not in use.

Note : For additional information and safety guidelines, refer to the separate safety instructions provided.

Overview of the Components

IMPORTANT: Be sure to read the separately enclosed safety instructions first.

Instruction Manual
Thank you for choosing our product. We hope you will enjoy using the appliance.

Read the instruction manual and the separately enclosed safety instructions very carefully before using this appliance. Keep these documents, including the warranty certificate, receipt, and, if possible, the box with the inner packaging in a safe place. If you pass the appliance on to a third party, always include all the relevant documents.

Symbols in this Instruction Manual

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the appliance

WARNING: This warns you of dangers to your health and indicates possible injury risks.

CAUTION: This refers to possible hazards to the appliance or other objects.

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material, such as foils, filling material, cable ties and cardboard packaging.
3. Check the scope of delivery for completeness.
4. If the contents of the packaging are incomplete or if damage can be detected, do not operate the appliance. Return it to the dealer immediately.

Overview of the Components / Scope of Delivery

1. Cut length comb (shaving head covered)
2. Button (fold out shaving head)
3. Selection button for cutting length 1 = 5 mm, 2 = 9 mm, 3 = 13 mm, 4 = 16 mm (approximate values; 3 mm without comb attachment)
4. ON / OFF switch
5. Charging indicator light
6. Charging station / stand
7. Comb
8. Scissor
9. Cleaning brush
10. Power supply unit (charger)

Warnings for the Use of the Appliance

Read the instructions!

Only use with “HSM / R 3313” power supply unit! For the purpose of recharging the battery, only use the detachable supply unit provided with this appliance.
Do not use power supply with damaged plug! If  the pins of the plug part are damaged, the plug-inpower supply shall be scrapped.

WARNING of Electric Shock:

• Keep the power supply unit dry.
• Do not charge the appliance near bathtubs, shower trays or other vessels containing water.
• If the appliance does fall into water, first unplug the power supply unit from the wall socket.
• Charge the appliance in a cool, dry place.
• Do not replace any parts. Do not make any modifications.

WARNING : Risk of Injury!

• Do not press the shaver head of the shaver too hard on the skin.
• Do not use the appliance if the shaving head is damaged.
• Never remove an attachment during operation!

CAUTION:

• Choose the place for charging so that the appliance is not exposed to direct sunlight or other sources of heat.
• Do not charge the rechargeable battery unattended.
• Always unplug the power supply unit from the wall socket after charging.

Notes for Use

• Only trim main or beard hair with the appliance.
• Only cut dry hair with the appliance.
• Start with the longest setting and trim your main hair/beard hair gradually to the desired length.
• You can reach the smallest setting “ 3 mm ” by removing the comb attachment.

Charging the Rechargeable Battery

1. Switch off the appliance:
   • Slide the switch (4) down. OFF is visible on the switch.
2. Connect the power supply plug with one of the connection sockets listed below.
   • There is a connection socket directly at the lower end of the appliance.
   • Or place the appliance in the charging / installation station. The connection socket is located at the rear.
3. Connect the power supply unit to a socket.
   • The charging indicator lights up during the charging process.
   • The charging indicator light gives no indication of the rechargeable battery’s charge status.
   • Mains-only operation is not possible.
4. Charge the appliance for 14 hours before using it for the first time.
   • Always unplug the power supply unit after 14 hours of charging.You will extend the life of the rechargeable battery if you observe the following:
   • Wait until the rechargeable battery is almost empty before charging.
   • Do not leave the appliance connected to the charger for more than 14 hours.
   • Only charge the appliance at an ambient temperature between 0 °C and + 40 °C.

Using the Appliance

Switching On and Off

Slide the switch (4) to turn the appliance on or off. Cutting Hair and Trimming the Beard

1. Select the cutting length with the help of the cutting length comb. Press and slide the button (3) at the same time.
2. Slide the switch (4) towards the shaving head.

Trimming Contours and Shaving Out the Neck

• Remove the cut length comb (1) and slide the switch (4) towards the shaving head.
• The shaving head enables precise trimming of the beard contours and clean shaving of the hairline at the nape of the neck.

End Operation

Slide the switch (4) down.

Cleaning

WARNING:

• Switch off the appliance before cleaning. Unplug the power supply unit from the socket.
• Do not immerse the appliance, the charging station or the power supply unit in water!

CAUTION:

• Also do not clean the appliance under running water! The electronics could be damaged.
• Do not use a wire brush or other abrasive objects.
• Do not use any sharp or abrasive cleaning agents.
• Regular cleaning and maintenance guarantee optimum results and a long service life.
  1. Remove hair residues after each use with the cleaning brush.
  2. To do this, pull off the cutting length comb (1).
  3. To fold out the shaving head, press the two buttons (2) on the back of the appliance.
  4. After cleaning, fold the shaving head back in so that you hear it click into place.
  5. Place the cutting length comb back on.
• Clean the outside of the appliance if necessary with a slightly damp cloth.
• Clean the power supply unit only with a dry cloth.

Important Care Advice

To maintain the cutting performance of the shaving head for a long time, regularly apply 1 – 2 drops of acid-free / resin-free oil, such as shaving head oil, sewing machine oil or precision mechanics oil to the shaving head. This lubrication keeps the shaving head running smoothly and prevents the blades from becoming blunt.

Storage

• Clean the appliance as described and allow it to dry completely.
• Always store the appliance out of the reach of children in a well-ventilated and dry place.
• The storage temperature should be between 10 °C and 20 °C.
• We recommend storing the appliance in its original packaging if you do not intend to use it for a longer period of time.
• Rechargeable battery lifespan: Even when switched off, the rechargeable battery is constantly discharging. If you do not use the appliance for a longer period of time, charge the rechargeable battery at least every 4 to 6 weeks

Technical Data

• Model: HSM / R 3313

• Net weight : approx. 300 g

• Protection class :

• Input: DC 3.6 V, 200 mA
  Power Supply Unit

• Protection class:

• Input : AC 100 – 240 V, 50 / 60 Hz, 0.2 A max.

• Output : DC 3.6 V, 200 mA

• Polarity :

• Rechargeable battery :1.2 V, 800 mAh, NiMH

• Running time :35 minutes maximum

• Charging time : 14 hours

The right to make technical and design modifications in the course of continuous product development remains reserved.

This appliance has been tested according to all applicable, current CE directives and built according to the latest safety regulations.

Product Specifications in accordance with Regulation (EU) 2019 / 1782 Power Supplies

Information about the Power Supply Used| Value| Unit
---|---|---
Clatronic International GmbH Commercial register number HRB 9158

Industriering Ost 40, 47906 Kempen, Germany

Model identifier| HSM/R 3313
Input voltage| 100–240| V~
Input alternating current frequency| 50 / 60| Hz
Output voltage AC / DC| 3.6| V DC
Output current| 0.2| A
Output power| 0.7| W
Information about the Power Supply Used| Value| Unit
---|---|---
Average efficiency in operation| 58.5| %
Low load efficiency (10 %)| *| %
No-load power consumption| 0.06| W

not applicable due to an output power of less than 10 W. The relevant load conditions are as follows:

Percentage of nameplate output current

Disposal

Dispose of Batteries / Rechargeable Batteries
This appliance is equipped with a rechargeable Ni-MH battery. Remove the battery before dispos- ing of the appliance. As a consumer, you are obliged by law to return old batteries/accumulators.

WARNING:

1. Use a small Phillips screwdriver to loosen the screws from the bottom of the Remove the bottom of the casing.
2. Remove the rechargeable battery.
3. Use a pair of scissors to cut the wires on the recharge- able

You can take the rechargeable battery to a collection point for used batteries or hazardous waste. Ask your municipality for further information.

Meaning of the “Dustbin” Symbol

Protect our environment: do not dispose of elec- trical equipment in the domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health. This will contribute to the recycling and other forms of re-utilisation of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authority. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.

Internet: http://www.clatronic-germany.de

Made in P.R.C.

HSMR3313_IM_09.2022 04.10.22

Stand 09 / 2022

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>